All Stories

  1. The influence of laser surface remelting on the degradation of Ti-6Al-3V alloy during the incubation period in ultrasonic cavitation erosion

    Article • Optics & Laser Technology, December 2026, Elsevier

    prof Alicja K. Krella

  2. The effect of nitriding conditions on the cavitation erosion resistance of X20Cr13 steel

    Article • Wear, July 2026, Elsevier

    prof Alicja K. Krella

  3. Magnesium Degradation Under Cavitation Erosion Conditions

    Article • JOM, March 2026, Springer Science + Business Media

    prof Alicja K. Krella

  4. Effect of friction stir processing on the microstructure and cavitation erosion behavior of AlSi9Mg aluminum alloy

    Article • Journal of Materials Research and Technology, March 2026, Elsevier

    prof Alicja K. Krella

  5. Slurry and cavitation-erosion resistance of steel-ceramic composites manufactured using in-situ and ex-situ techniques

    Article • Materials Letters, January 2026, Elsevier

    dr Grzegorz Tęcza, prof Alicja K. Krella

  6. The influence of intermetallic phases in blocking crack growth

    Article • Advanced Engineering Materials, March 2025, Wiley

    prof Alicja K. Krella

  7. The influence of plasma nitriding on the resistance of X20Cr13 steel to cavitation erosion

    Article • Wear, March 2025, Elsevier

    prof Alicja K. Krella

  8. Hydrogen-Induced Degradation of Metallic Materials—A Short Review

    Article • Materials, January 2025, MDPI AG

    prof Alicja K. Krella

  9. Hydrogen-Induced Degradation of Metallic Materials – A Short Review

    Article • December 2024, MDPI AG

    prof Alicja K. Krella

  10. The degradation mechanisms of a nanobainitic steel under cavitation erosion conditions

    Article • Wear, February 2024, Elsevier

    prof Alicja K. Krella

  11. Behaviour of nickel coatings made by brush plating technology in conditions of cavitation erosion and corrosion

    Article • Wear, October 2023, Elsevier

    prof Alicja K. Krella

  12. Degradation and Protection of Materials from Cavitation Erosion: A Review

    Article • Materials, March 2023, MDPI AG

    prof Alicja K. Krella

  13. Effect of mechanical properties of CrN/CrCN coatings and uncoated 1.402 stainless steel on the evolution of degradation and surface roughness in cavitation erosion

    Article • Tribology International, January 2023, Elsevier

    prof Alicja K. Krella

  14. Effect of the reversal of the layer thickness ratio in the CrN/CrCN multilayer coating on cavitation-induced degradation

    Article • Tribology International, April 2022, Elsevier

    prof Alicja K. Krella

  15. Degradation of Armco iron caused by cavitation: Part I – Correlation with flow

    Article • Engineering Failure Analysis, October 2021, Elsevier

    prof Alicja K. Krella

  16. Degradation of Armco iron caused by cavitation: Part II – Correlation with stress analysis

    Article • Engineering Failure Analysis, October 2021, Elsevier

    prof Alicja K. Krella

  17. Cavitation erosion of monolayer PVD coatings – An influence of deposition technique on the degradation process

    Article • Wear, August 2021, Elsevier

    prof Alicja K. Krella

  18. Damage Development on the Surface of Nickel Coating in the Initial Period of Erosion

    Article • Materials, June 2021, MDPI AG

    prof Alicja K. Krella

  19. Effect of Thermal Treatment and Erosion Aggressiveness on Resistance of S235JR Steel to Cavitation and Slurry

    Article • Materials, March 2021, MDPI AG

    prof Alicja K. Krella

  20. Influence of micro Ti particles on resistance to cavitation erosion of Mg-xTi composites

    Article • Mechanics of Materials, March 2021, Elsevier

    prof Alicja K. Krella

  21. Effect of annealing temperature on slurry erosion resistance of ferritic X10CrAlSi18 steel

    Article • Tribology International, January 2021, Elsevier

    prof Alicja K. Krella

  22. Degradation of ferritic X10CrAlSi18 stainless steel caused by slurry

    Article • Engineering Failure Analysis, October 2020, Elsevier

    prof Alicja K. Krella

  23. Resistance of PVD Coatings to Erosive and Wear Processes: A Review

    Article • Coatings, September 2020, MDPI AG

    prof Alicja K. Krella

  24. The erosion resistance of S235JR steel to flow cavitation was investigated.

    Article • Wear, July 2020, Elsevier

    prof Alicja K. Krella

  25. Experimental Study of the Influence of Deposition of Multilayer CrN/CrCN PVD Coating on Austenitic Steel on Resistance to Cavitation Erosion

    Article • Coatings, May 2020, MDPI AG

    prof Alicja K. Krella

  26. Cavitation Erosion Resistance Influence of Material Properties

    Article • Advances in Materials Science, December 2019, De Gruyter

    prof Alicja K. Krella

  27. An Influence of Factors of Flow Condition, Particle and Material Properties on Slurry Erosion Resistance

    Article • Advances in Materials Science, June 2019, De Gruyter

    prof Alicja K. Krella

  28. Effect of cavitation intensity on degradation of X6CrNiTi18-10 stainless steel

    Article • Wear, August 2018, Elsevier

    prof Alicja K. Krella

  29. Cavitation Erosion – Phenomenon and Test Rigs

    Article • Advances in Materials Science, June 2018, De Gruyter

    prof Alicja K. Krella

  30. Protective properties of Al2O3 + TiO2 coating produced by the electrostatic spray deposition method

    Article • Ceramics International, October 2017, Elsevier

    prof Alicja K. Krella

  31. Cavitation erosion of CrN/CrCN multilayer coating

    Article • Wear, September 2017, Elsevier

    prof Alicja K. Krella

  32. Degradation of AlMg2 aluminium alloy caused by cavitation — An effect of cavitation intensity

    Article • Materials Characterization, August 2017, Elsevier

    prof Alicja K. Krella

  33. Design of test devices for investigation of resistance of material agains slurry erosion.

    Article • Advances in Materials Science, January 2017, De Gruyter

    prof Alicja K. Krella, MSc Marta H. Buszko

  34. Al2O3 + TiO2 Thin Film Deposited by Electrostatic Spray Deposition

    Article • October 2016, Springer Science + Business Media

    prof Alicja K. Krella

  35. Thermal resistance of Al2O3 coating produced by electrostatic spray deposition method

    Article • Mechanics of Materials, July 2016, Elsevier

    prof Alicja K. Krella

  36. ceramic coating by electrostatic spray method

    Article • Advances in Materials Science, January 2016, De Gruyter

    prof Alicja K. Krella

  37. Degradation of protective PVD coatings

    Article • January 2016, Elsevier

    prof Alicja K. Krella

  38. Cavitation erosion resistance of Ti/TiN multilayer coatings

    Article • Surface and Coatings Technology, August 2013, Elsevier

    prof Alicja K. Krella

  39. Cavitation erosion of TiN and CrN coatings deposited on different substrates

    Article • Wear, January 2013, Elsevier

    prof Alicja K. Krella

  40. Cavitation erosion resistance parameter of hard CAVD coatings

    Article • Progress in Organic Coatings, April 2011, Elsevier

    prof Alicja K. Krella

  41. The new parameter to assess cavitation erosion resistance of hard PVD coatings

    Article • Engineering Failure Analysis, April 2011, Elsevier

    prof Alicja K. Krella

  42. An experimental parameter of cavitation erosion resistance for TiN coatings

    Article • Wear, January 2011, Elsevier

    prof Alicja K. Krella

  43. An approach to evaluate the resistance of hard coatings to shock loading

    Article • Surface and Coatings Technology, December 2010, Elsevier

    prof Alicja K. Krella

  44. The experimental resistance parameter for TiN coating to cavitation action

    Article • Advances in Materials Science, January 2010, De Gruyter Open Sp. z o.o.

    prof Alicja K. Krella

  45. Cavitation degradation model of hard thin pvd coatings

    Article • Advances in Materials Science, January 2010, De Gruyter Open Sp. z o.o.

    prof Alicja K. Krella

  46. The influence of TiN coatings properties on cavitation erosion resistance

    Article • Surface and Coatings Technology, October 2009, Elsevier

    prof Alicja K. Krella

  47. Cavitation resistance of Cr–N coatings deposited on austenitic stainless steel at various temperatures

    Article • Wear, March 2009, Elsevier

    prof Alicja K. Krella

  48. Cavitation Resistance of TiN Nanocrystalline Coatings with Various Thickness

    Article • Advances in Materials Science, January 2009, De Gruyter Open Sp. z o.o.

    prof Alicja K. Krella

  49. Cavitation erosion resistance of nanocrystalline TiN coating deposited on stainless steel

    Article • Wear, September 2008, Elsevier

    prof Alicja K. Krella

  50. Investigation concerning the cavitation resistance of TiN coatings deposited on austenitic stainless steel at various temperatures

    Article • Wear, June 2008, Elsevier

    prof Alicja K. Krella

  51. On fractional approach to assessment of material resistance to cavitation

    Article • Wear, September 2007, Elsevier

    prof Alicja K. Krella

  52. Influence of the substrate hardness on the cavitation erosion resistance of TiN coating

    Article • Wear, September 2007, Elsevier

    prof Alicja K. Krella

  53. Cavitation erosion resistance of Cr–N coating deposited on stainless steel

    Article • Wear, June 2006, Elsevier

    prof Alicja K. Krella

  54. Influence of cavitation intensity on X6CrNiTi18-10 stainless steel performance in the incubation period

    Article • Wear, June 2005, Elsevier

    prof Alicja K. Krella

  55. Towards quantitative assessment of material resistance to cavitation erosion

    Article • Wear, January 2005, Elsevier

    prof Alicja K. Krella