All Stories

  1. A hybrid lattice Boltzmann-smoothed profile method for simulation of a moving particle under dissolution in a shear flow
  2. The effect of nonlinear reversible heterogeneous reaction kinetics on single- and multi-obstacle dissolution rates: A lattice Boltzmann study
  3. Decoupling separation accuracy and flow partitioning in industrial hydrocyclones: CFD investigation of axial installation angle effect
  4. A Green and Sustainable Solvent‐ Free Method for Synthesizing Wheat Starch Nanoparticles via Nanoprecipitation
  5. Lattice Boltzmann modeling of reactive transport in porous media: A review of interface dynamics, boundary conditions, and dissolution patterns
  6. Molecular dynamics insight into thermal transport mechanisms in water-based nanofluids: Effects of temperature, nanoparticle size, and concentration
  7. CFD Simulation of Micro-Level Water Transport in Potato Cells Under Periodic Boundary Conditions: Apoplastic Versus Symplastic Hydrodynamic
  8. CFD simulation and optimization of an industrial cement gas–solid air classifier
  9. Lattice Boltzmann simulation of dissolution patterns in porous media: Single porosity versus dual porosity media
  10. New curved boundary scheme in lattice Boltzmann framework for simulation of dissolution through nonlinear heterogeneous reactions in general form
  11. In silico study of alkaloids with quercetin nucleus for inhibition of SARS-CoV-2 protease and receptor cell protease
  12. Simulation of drop deformation and breakup in simple shear flow
  13. A Comparative Study of TIP4P-2005, SPC/E, SPC, and TIP3P-Ew Models for Predicting Water Transport Coefficients Using EMD and NEMD Simulations
  14. Molecular dynamics insight into the best governing mechanism for thermophysical properties changes in nanofluids
  15. Combining lattice Boltzmann and smoothed profile methods for calculating the interface normal vectors and its application for simulating dissolution phenomenon
  16. Corrigendum to “Lattice Boltzmann study of dissolution in porous media: Comparison of VOP with VOF-curved boundary coupling” [J. Petrol. Sci. Eng., 216 (2022) 110754]
  17. Lattice Boltzmann study of dissolution in porous media: Comparison of VOP with VOF-curved boundary coupling
  18. Numerical analysis of steady and transient magnetohydrodynamic flows around a cylinder
  19. Effects of Hydrophilic Silica Nanoparticles on Morphology and Mechanical Properties of a Typical Tyre Compound
  20. Comparison of dissolution in a calcite fracture by isothermal and non-isothermal models
  21. Non-linear boundary conditions for the convection-diffusion equation in lattice Boltzmann framework
  22. Carbon Derivatives from CO2
  23. Experimental Investigation and Multi-Gene Genetic Programming Simulation of Portland Clinker Burnability
  24. Combination of CFD and DOE for optimization of thermosyphon heat pipe
  25. Lattice Boltzmann study of porosity-permeability variation in different regimes of non-isothermal dissolution in porous media
  26. The effect of radio-waves irradiation on copper-ore leaching
  27. Biodegradation of Weathered Petroleum Hydrocarbons Using Organic Waste Amendments
  28. MD and DFT calculations on the structural variations of amino-cyclodextrin as a pH-sensitive carrier for smart carriage and release of Doxorubicin
  29. Combining 10 meta-heuristic algorithms, CFD, DOE, MGGP and PROMETHEE II for optimizing Stairmand cyclone separator
  30. Carbon-Based Materials for Desalination
  31. Optimal loading of omecamtiv mecarbil by chitosan: A comprehensive and comparative molecular dynamics study
  32. Remediation of Pollution by Oil Spills
  33. Polymerized Ionic Liquids as Antimicrobial Materials
  34. Improvement hydrocyclone separation of biodiesel impurities prepared from waste cooking oil using CFD simulation
  35. Anode Materials for Zinc‐Air Batteries
  36. Assessment of pH-responsive nanoparticles performance on laboratory column flotation cell applying a real ore feed
  37. A new insight into pore body filling mechanism
  38. Molecular dynamics insight into the behaviour of 5-nonylsalicylaldoxime
  39. The possibility of cadmium extraction to the ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate in the presence of hydrochloric acid: a molecular dynamics study of the water–IL interface
  40. The effect of magnetic field and operating parameters on cathodic copper winning
  41. Visualization study of the effects of oil type and model geometry on oil recovery under ultrasonic irradiation in a glass micro-model
  42. CFD simulation of an industrial hydrocyclone
  43. Investigation of the Capability of Carbon Nanotube Membranes in Separating the Heavy Metal Ions from Aqueous Solutions by Molecular Dynamics Simulation
  44. Understanding the structural, dynamic and thermodynamic properties of 5-Nonylsalicylaldoxime
  45. Numerical Simulation of the Impact of Natural Fracture
  46. Experimental investigation on the effect of ultrasonic waves on reducing asphaltene deposition and improving oil recovery under temperature control
  47. Lattice Boltzmann Simulation of Natural Convection in a Fractured Petroleum Reservoir Domain
  48. Sol-gel derived flexible silica aerogel as selective adsorbent for water decontamination from crude oil
  49. CFD simulation of the preheater cyclone of a cement plant
  50. Removal of iron ions from industrial copper raffinate and electrowinning electrolyte solutions
  51. Atomistic insights into the thermodynamics, structure, and dynamics of ionic liquid
  52. Prediction of critical temperature, critical pressure and acentric factor of some ionic liquids
  53. CFD simulation of melting process of phase change materials
  54. Prediction of Pressure Drop in Venturi Scrubbers by Multi-Gene Genetic Programming
  55. The microwave irradiation effect on copper leaching
  56. Experimental and Numerical Study of the Onset of Transient Natural Convection
  57. Computational Fluid Dynamics Simulation of Two-dimensional Natural Convectio
  58. Dew point pressure model for gas condensate reservoirs based on multi-gene genetic programming approach
  59. Using surface modified clay nanoparticles to improve rheological behavior of Hydrolized Polyacrylamid (HPAM) solution for enhanced oil recovery with polymer flooding
  60. Impact of natural convection and diffusion on variation of oil composition through a fractured model
  61. Prediction of thermal conductivity and viscosity of nanofluids by molecular dynamics simulation
  62. Simultaneous absorption of carbon dioxide (CO 2 ) and hydrogen sulfide (H 2 S) from CO 2 –H 2 S–CH 4 gas mixture using amine-based nanofluids in a wetted wall column
  63. Design and simulation of high pressure cyclones for a gas city gate station using semi-empirical models, genetic algorithm and computational fluid dynamics
  64. Evaluation and Comparison of Sulfate Anions Removal from Artificial and Industrial Wastewaters by Nanofiltration Process in a Laboratory Scale
  65. CFD simulation of an industrial copper electrowinning cell
  66. Permeability Estimation in Petroleum Reservoir by Meta-heuristics: An Overview
  67. Permeability estimation in heterogeneous oil reservoirs by multi-gene genetic programming algorithm
  68. Upgrading of Ilmenite Using KOH Sub-molten Salt Process Assisted by Mechanical Activation
  69. Investigation of nanoparticle aggregation effect on thermal properties of nanofluid by a combined equilibrium and non-equilibrium molecular dynamics simulation
  70. Wellhead Choke Performance in Oil Well Pipeline Systems Based on Genetic Programming
  71. Optimization of the reflux ratio of benzene-toluene stage distillation columns by the Cuckoo algorithm
  72. Prediction of Oil Recovery Factor
  73. The impact of silica nanoparticles on the performance of polymer solution in presence of salts in polymer flooding for heavy oil recovery
  74. Developing a Formula Based on a Hybrid Neural Genetic Algorithm for the Prediction of Minimum Miscibility Pressure
  75. A comparison study of using optimization algorithms and artificial neural networks for predicting permeability
  76. Artificial neural network (ANN) approach for modeling and formulation of phenol adsorption onto activated carbon
  77. CFD modeling of the electrolyte flow in the copper electrorefining cell of Sarcheshmeh copper complex
  78. Optimization of smart self-healing coatings based on micro/nanocapsules in heavy metals emission inhibition
  79. A Dew Point Pressure Model for Gas Condensate Reservoirs Based on an Artificial Neural Network
  80. Experimental study on convective heat transfer of TiO2 nanofluids
  81. An Experimental Investigation of Silica Nanoparticles Effect on the Rheological Behavior of Polyacrylamide Solution to Enhance Heavy Oil Recovery
  82. On the Control of Glass Micro-model Characteristics Developed by Laser Technology
  83. A combined CFD modeling with population balance equation to predict pressure drop in venturi scrubbers
  84. Estimation of the compressive strength of 28-day-old concrete by use of an adaptive cuckoo–fuzzy logic model
  85. Prediction of specific heat and thermal conductivity of nanofluids by a combined equilibrium and non-equilibrium molecular dynamics simulation
  86. Application of artificial neural networks for formulation and modeling of dye adsorption onto multiwalled carbon nanotubes
  87. A new correlation based on artificial neural networks for predicting the natural gas compressibility factor
  88. Introducing a new formula based on an artificial neural network for prediction of droplet size in venturi scrubbers
  89. Evaluation of the corrosion inhibition effect of micro/nanocapsulated polymeric coatings
  90. Neural Fuzzy System Development for the Prediction of Permeability From Wireline Data Based on Fuzzy Clustering
  91. The Prediction of Permeability From Well Logging Data Based on Reservoir Zoning, Using Artificial Neural Networks in One of an Iranian Heterogeneous Oil Reservoir
  92. A case study on suspended particles in a natural gas urban transmission and distribution network
  93. Permeability prediction based on reservoir zonation by a hybrid neural genetic algorithm in one of the Iranian heterogeneous oil reservoirs
  94. Mercury(II) removal from aqueous solutions by adsorption on multi-walled carbon nanotubes
  95. CFD simulation and optimization of the settler of an industrial copper solvent extraction plant: A case study
  96. Experimental study of filtration system performance of natural gas
  97. CFD modeling of the launder of settler of an industrial copper solvent extraction plant: A case study on Sarcheshmeh copper complex, Iran
  98. Prediction of Thermal Conductivity and Convective Heat Transfer Coefficient of Nanofluids by Local Composition Theory
  99. Pore-Scale Monitoring of Wettability Alteration by Silica Nanoparticles During Polymer Flooding to Heavy Oil in a Five-Spot Glass Micromodel
  100. A CFD study of the effect of cyclone size on its performance parameters
  101. A Tertiary Steam Flood Strategy Case Study for an Extra-Heavy Iranian Oil Reservoir
  102. SIMULATION OF SO2ABSORPTION IN A VENTURI SCRUBBER
  103. Correlation of Shear Viscosity of Nanofluids Using the Local Composition Theory
  104. A Steam Flood Case Study on One Extra-Heavy Southwestern Iranian Oil Reservoir
  105. A laboratory study of hot WAG injection into fractured and conventional sand packs
  106. Study of kinetic and fixed bed operation of removal of sulfate anions from an industrial wastewater by an anion exchange resin
  107. Estimation of pressure drop in venturi scrubbers based on annular two-phase flow model, artificial neural networks and genetic algorithm
  108. A neural network for predicting saturated liquid density using genetic algorithm for pure and mixed refrigerants
  109. Design of artificial neural networks using a genetic algorithm to predict collection efficiency in venturi scrubbers
  110. ESTIMATION OF PARTICLE CONCENTRATION EMITTED FROM THE STACKS OF KERMAN CEMENT PLANT USING ARTIFICIAL NEURAL NETWORKS
  111. Predicting pressure drop in venturi scrubbers with artificial neural networks
  112. Numerical Modeling of Particulate Matter Dispersion from Kerman Cement Plant, Iran
  113. Measuring and modeling particulate dispersion: A case study of Kerman Cement Plant
  114. Artificial Neural Networks Approach for Estimating Filtration Properties of Drilling Fluids
  115. Estimating the initial pressure, permeability and skin factor of oil reservoirs using artificial neural networks
  116. The Effect of Diffusion on the Saturation Pressure of Fractured Oil Reservoirs
  117. The Effect of Diffusion on the Saturation Pressure of Fractured Oil Reservoirs
  118. Simulation of an orifice scrubber performance based on Eulerian/Lagrangian method
  119. Prediction of Pressure Drop in an Orifice Scrubber Based on a Lagrangian Approach
  120. Automated Analysis Of Pressure Build Up Tests Affected By Phase Redistribution