Contact

All Stories

  1. Increasing Technological Plasticity of Low-Carbon Steels in the Process of Asymmetric Cold Rolling

    Article • January 2025, Springer Science + Business Media

    Alexander Pesin

  2. Capabilities of asymmetric rolling of single-layer and laminated materials made from aluminum and its alloys

    Article • Izvestiya Non-Ferrous Metallurgy, December 2024, National University of Science and Technology MISiS

    Alexander Pesin

  3. Study on Dynamic Loading of Composite Metallic Materials with an Interlocking Structure

    Article • January 2024, Springer Science + Business Media

    Alexander Pesin

  4. Deformation Behavior under Tension with Pulse Current of Ultrafine-Grain and Coarse-Grain CP Titanium

    Article • Materials, December 2022, MDPI AG

    Alexander Pesin

  5. Effect of tool path strategy and tooltip profile on geometrical feature and surface quality of Al-6061 alloy during deformation machining in bending mode

    Article • Advances in Materials and Processing Technologies, June 2022, Taylor & Francis

    Alexander Pesin

  6. In Situ Heating Neutron and X‐Ray Diffraction Analyses for Revealing Structural Evolution during Postprinting Treatments of Additive‐Manufactured 316L Stainless Steel

    Article • Advanced Engineering Materials, April 2022, Wiley

    Alexander Pesin

  7. A Comparative Investigation of Conventional and Hammering-Assisted Incremental Sheet Forming Processes for AA1050 H14 Sheets

    Article • Metals, November 2021, MDPI AG

    Alexander Pesin

  8. In Situ Heating Neutron and X‐Ray Diffraction Analyses for Revealing Structural Evolution during Postprinting Treatments of Additive‐Manufactured 316L Stainless Steel

    Article • Advanced Engineering Materials, November 2021, Wiley

    Alexander Pesin

  9. Asymmetric (Hot, Warm, Cold, Cryo) Rolling of Light Alloys: A Review

    Article • Metals, June 2021, MDPI AG

    Alexander Pesin

  10. Effect of Rolling Temperature and Subsequence Ageing on the Mechanical Properties and Microstructure Evolution of an Al-Cu-Li Alloy

    Article • Metals, May 2021, MDPI AG

    Alexander Pesin

  11. Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy

    Article • Materials Science and Engineering A, March 2021, Elsevier

    Alexander Pesin

  12. Structure and Properties of Al-Ca(Fe, Si, Zr, Sc) Wire Alloy Manufactured from As-Cast Billet

    Article • JOM, September 2020, Springer Science + Business Media

    Alexander Pesin

  13. Microstructural Evolution and Mechanical Properties of Ultrafine‐Grained Ti Fabricated by Cryorolling and Subsequent Annealing

    Article • Advanced Engineering Materials, June 2020, Wiley

    Alexander Pesin

  14. Sandwich‐Like Cu/Al/Cu Composites Fabricated by Cryorolling

    Article • Advanced Engineering Materials, June 2020, Wiley

    Alexander Pesin

  15. Multiscale Simulation of the Stress-Strain State of Low Carbon Steel Strip Processed by Asymmetric Rolling

    Article • Solid State Phenomena, May 2020, Trans Tech Publications

    Alexander Pesin

  16. Application of Statistical Representation of Microstructure during Simulation of Ferritic-Pearlitic Steel Wire Drawing

    Article • Materials Science Forum, May 2020, Trans Tech Publications

    Alexander Pesin

  17. Numerical Modelling and Development of New Technical Solutions in Metallurgy and Material Processing

    Article • Solid State Phenomena, May 2020, Trans Tech Publications

    Alexander Pesin

  18. Microstructure and Properties Formed at Different Cooling Rates of Low Carbon Alloy Steel for Welding Wire Production

    Article • Solid State Phenomena, May 2020, Trans Tech Publications

    Alexander Pesin

  19. Fabrication and Characterization of High-Bonding-Strength Al/Ti/Al-Laminated Composites via Cryorolling

    Article • Acta Metallurgica Sinica (English Letters), April 2020, Springer Science + Business Media

    Alexander Pesin

  20. Recent Development of Superplasticity in Aluminum Alloys: A Review

    Article • Metals, January 2020, MDPI AG

    Alexander Pesin

  21. Phase composition and mechanical properties of Al–1.5%Cu–1.5%Mn–0.35%Zr(Fe,Si) wire alloy

    Article • Journal of Alloys and Compounds, April 2019, Elsevier

    Alexander Pesin

  22. Interface shear strain of 1050/6061 laminated composite processed by asymmetric accumulative roll bonding

    Article • January 2019, American Institute of Physics

    Alexander Pesin, Denis Pustovoitov

  23. FEM simulation of strain gradients induced in metal sheets by special rolling techniques

    Article • January 2019, American Institute of Physics

    Alexander Pesin, Denis Pustovoitov

  24. Surface Wear in Hadfield Steel Castings DOPED with Nitrided Vanadium

    Article • Metals, October 2018, MDPI AG

    Alexander Pesin

  25. Development of the Technology of Various Large Bodies Manufacturing Based on Combined Methods of Deformation

    Article • Key Engineering Materials, October 2016, Trans Tech Publications

    Alexander Pesin

  26. FE Analysis of the Applicability of the Shear-Compression Testing to the Modeling of the Asymmetric Rolling Process

    Article • Materials Science Forum, September 2016, Trans Tech Publications

    Alexander Pesin, Denis Pustovoitov

  27. Numerical Study of Grain Evolution and Dislocation Density during Asymmetric Rolling of Aluminum Alloy 7075

    Article • Key Engineering Materials, February 2016, Trans Tech Publications

    Alexander Pesin, Denis Pustovoitov

  28. Technology Development of Large-Size Bodies Manufacturing from Thick Plate Materials Based on Combined Methods of Deformation

    Article • Key Engineering Materials, February 2016, Trans Tech Publications

    Alexander Pesin, Denis Pustovoitov

  29. Finite Element Modeling of Influence of Roll Form of Vertical Scale Breaker on Decreased Formation of Surface Defects during Roughing Hot Rolling

    Article • Key Engineering Materials, February 2016, Trans Tech Publications

    Alexander Pesin, Denis Pustovoitov

  30. Heat transfer modeling in asymmetrical sheet rolling of aluminium alloys with ultra high shear strain

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Alexander Pesin

  31. Modeling of the roll wear and material damage during high-ratio differential speed rolling of aluminium alloy 7075

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Alexander Pesin

  32. Finite Element Modelling of Combined Process of Plate Rolling and Stamping

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Alexander Pesin

  33. Research of edge defect formation in plate rolling by finite element method

    Article • Journal of Materials Processing Technology, June 2015, Elsevier

    Alexander Pesin

  34. Finite Element Modeling of Roll Wear during Cold Asymmetric Sheet Rolling of Aluminum Alloy 5083

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Alexander Pesin

  35. Finite Element Analysis of Symmetric and Asymmetric Three-roll Rolling Process

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Alexander Pesin, Denis Pustovoitov

  36. Study of Different Large Bodies Manufacturing Based on Combined Methods of Deformation

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Alexander Pesin, Denis Pustovoitov

  37. Finite Element Modeling of Strain Distribution through Sheet Thickness during Cold Rolling with Grooved Rolls

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Alexander Pesin, Denis Pustovoitov

  38. Finite Element Modeling of Shear Strain in Rolling with Velocity Asymmetry in Multi-Roll Calibers

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Alexander Pesin

  39. Influence of Process Parameters on Distribution of Shear Strain through Sheet Thickness in Asymmetric Rolling

    Article • Key Engineering Materials, September 2014, Trans Tech Publications

    Alexander Pesin

  40. Finite Element Modeling of Edge Defect Formation in Plate Rolling

    Article • Procedia Engineering, January 2014, Elsevier

    Alexander Pesin

  41. Finite Element Modeling of Shear Strain in Asymmetric and Symmetric Rolling in Multi Roll Calibers

    Article • Procedia Engineering, January 2014, Elsevier

    Alexander Pesin

  42. Numerical Research of Shear Strain in an Extreme Case of Asymmetric Rolling

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Alexander Pesin

  43. Theoretical Basis and Technology Development of the Combined Process of Asymmetric Rolling and Plastic Bending

    Article • Advanced Materials Research, November 2012, Trans Tech Publications

    Alexander Pesin

  44. Improving the quality control system for hot- and cold-rolled products at the Magnitogorsk Metallurgical Combine

    Article • Metallurgist, September 2011, Springer Science + Business Media

    Alexander Pesin

  45. Behavior of transverse corner cracks of a slab in horizontal rollers

    Article • Steel in Translation, March 2010, Allerton Press

    Alexander Pesin

  46. Plate Rolling Modeling at Mill 5000 of OJSC “Magnitogorsk Iron and Steel” for Analysis and Optimization of Temperature Rates

    Article • January 2010, American Institute of Physics

    Alexander Pesin

  47. Transverse Crack Modeling of Continuously Casted Slabs through Finite Element Method in Roughing Rolling at Wide Strip Mill

    Article • January 2010, American Institute of Physics

    Alexander Pesin

  48. Efficient deformation in the roughing group of the 2000 mill

    Article • Steel in Translation, October 2009, Allerton Press

    Alexander Pesin

  49. Production of >16-mm strip after reconstruction of the 2000 mill

    Article • Steel in Translation, October 2009, Allerton Press

    Alexander Pesin

  50. Main structural factors of strengthening of low-carbon low-alloy pipe steels after controlled rolling

    Article • Metal Science and Heat Treatment, January 2009, Springer Science + Business Media

    Alexander Pesin

  51. Forming characteristics of slabs during rough rolling

    Article • Metallurgist, November 2008, Springer Science + Business Media

    Alexander Pesin

  52. Effective rough rolling of low-alloy steel

    Article • Steel in Translation, September 2008, Allerton Press

    Alexander Pesin

  53. Mathematical modelling of the stress–strain state in asymmetric flattening of metal band

    Article • Journal of Materials Processing Technology, September 2002, Elsevier

    Alexander Pesin