All Stories

  1. Renewable Energy Opportunities for Green Ammonia Storage: Challenges and Opportunities
  2. Advancements in electric vehicle safety and charging infrastructure
  3. Animate prime movers: an un-exploited resource towards achieving United Nations SDG 7-future research requirements
  4. AI Predictive Simulation for Low-Cost Hydrogen Production
  5. A Conceptual Work to Qualitatively Illustrate the Potential of Holistic Thinking Approaches as Effective Tools, for the Teacher Delivering/Analyzing Affective Domain Attributes
  6. Emerging Developments in Haptic Technologies
  7. AI Predictive Simulation for Low-Cost Hydrogen Production
  8. Fault mitigation and diagnosis for lithium-ion batteries: a review
  9. A renewable integrated multi-area system for LFC incorporating electrical vehicle with SoC estimation
  10. Introduction to switchgear: Types and insulation mediums
  11. A Grid Configuration to Use Solar Electricity 24 Hours a Day Without Energy Storage
  12. A Novel Modified Gorilla Troops Optimizer Algorithm for Interline Power Flow Controller-Based Damping Controller Design
  13. Advanced data-driven fault diagnosis in lithium-ion battery management systems for electric vehicles: Progress, challenges, and future perspectives
  14. Decarbonising the Australian economy: A first step
  15. Reviewing Demand Response for Energy Management with Consideration of Renewable Energy Sources and Electric Vehicles
  16. Maximum power optimization of a direct-drive wind turbine connected to PMSG using multi-objective genetic algorithm
  17. Geographical information system based assessment of various renewable energy potentials in Nigeria
  18. Performance analysis of drone sqadron optimisation based MPPT controller for grid implemented PV battery system under partially shaded conditions
  19. Multicriteria GIS-based assessment of biomass energy and hydropower potentials in Nigeria
  20. Multicriteria GIS-based assessment of biomass energy potentials in Nigeria
  21. Low/zero carbon technology diffusion and mapping for Nigeria’s decarbonization
  22. Hybrid PV and Battery System Sizing for Commercial Buildings in Malaysia: A Case Study of FKE-2 Building in UTeM
  23. Modeling and optimization of distributed energy resources in microgrid
  24. Optimal Sizing Capacities of Solar Photovoltaic and Battery Energy Storage Systems for Grid-Connected Commercial Buildings in Malaysia
  25. Smart agriculture for smart cities
  26. Design of Sustainable Buildings with Renewables
  27. Multiobjective and Simultaneous Two-Problem Allocation of a Hybrid Solar-Wind Energy System Joint with Battery Storage Incorporating Losses and Power Quality Indices
  28. Assessing small hydropower sites in Nigeria for sustainable development using ArcGIS
  29. Converting multiple propagating wave energy to wireless energy transfer to charge low powered cellular devices flat-battery on an emergency situation where charging point is unavailable
  30. Optimal sites for agricultural and forest residues energy conversion plant using geographic information system
  31. Decarbonising the Australian Economy: A First Step
  32. Editorial: Recent advances in renewable energy automation and energy forecasting
  33. Comparative Study of Grid Frequency Stability Using Flywheel-Based Variable-Speed Drive and Energy Capacitor System
  34. Parametrized Benchmarking of Green Hydrogen Pilot Studies
  35. Design, Modeling of a Green Building Energy Optimized Efficient System
  36. Development of a Low-Cost Autonomous Healthcare Digital Assistant Lead RoBot (DALBOT)
  37. ANFIS-Based Droop Control of an AC Microgrid System: Considering Intake of Water Treatment Plant
  38. Performance evaluation of IEC 61850 MMS messages under cybersecurity considerations
  39. Comprehensive analysis and design of furnace oil-based power station using ETAP
  40. Measurement-driven blind topology estimation for sparse data injection attack in energy system
  41. IoT Enabled Railway System and Power System
  42. Novel Dynamic Power Balancing Solution for Minimization Overdesigning in Military Aircraft Power System Architecture
  43. Mathematical Analysis on Harmonics Mitigation Using a Phase-Shifted Transformer based Twelve-Pulse Variable Frequency Drive
  44. Low Voltage Ride Through Controller for a Multi-Machine Power System Using a Unified Interphase Power Controller
  45. A review on methods of finding losses and cooling methods to increase efficiency of electric machines
  46. Vulnerability and Impact Analysis of the IEC 61850 GOOSE Protocol in the Smart Grid
  47. An Effective Algorithm for MAED Problems with a New Reliability Model at the Microgrid
  48. Maximum Power Point Tracking of Photovoltaic Renewable Energy System Using a New Method Based on Turbulent Flow of Water-Based Optimization (TFWO) Under Partial Shading Conditions
  49. A Holistic Review of Smart Grid Contribution Toward Energy Sustainability
  50. DFIG Pitch Angle Control with PID-type Fuzzy Logic Controller in a Microgrid
  51. Security threats and possible safeguard mechanisms under IEC 61850 environment
  52. The economic prospect of rooftop photovoltaic (PV) system in the commercial buildings in Bangladesh: a case study
  53. Integration of a Heuristic Multi-Agent Protection System into a Distribution Network Interconnected with Distributed Energy Resources
  54. Frequency performance analysis of multi-gain droop controlled DFIG in an isolated microgrid using real-time digital simulator
  55. ACS712 Based Intelligent Solid-State Relay for Overcurrent Protection of PV- Diesel Hybrid Mini Grid
  56. A New Model for Reconfiguration and Distributed Generation Allocation in Distribution Network Considering Power Quality Indices and Network Losses
  57. A Review of IEC 62351 Security Mechanisms for IEC 61850 Message Exchanges
  58. Seamless Engineering Process to Adapt IEC 61850 Standard for Substation Automation Through Requirements Specification
  59. Developing a Mathematical Model for Wind Power Plant Siting and Sizing in Distribution Networks
  60. Volcano multiparameter monitoring system based on Internet of Things (IoT)
  61. A Mathematical Method for Induction Generator Based Wind Power Plant Sizing and Siting in Distribution Network
  62. Battery Energy Storage System for Aggregated Inertia-Droop Control and a Novel Frequency Dependent State-of-Charge Recovery
  63. Optimal allocation for combined heat and power system with respect to maximum allowable capacity for reduced losses and improved voltage profile and reliability of microgrids considering loading condition
  64. Battery Energy Storage System Control for Mitigating PV Penetration Impact on Primary Frequency Control and State-of-Charge Recovery
  65. Smart control of BESS in PV integrated EV charging station for reducing transformer overloading and providing battery-to-grid service
  66. An Overview on Structural Advancements in Conventional Power System with Renewable Energy Integration and Role of Smart Grids in Future Power Corridors
  67. The influence of IEC 61850 standard: implementation and development of a functional substation automation simulator
  68. The Strategies of EV Charge/Discharge Management in Smart Grid Vehicle-to-Everything (V2X) Communication Networks
  69. Battery Energy Storage System for Improving Primary Frequency Control with Increased Level of Photovoltaic Penetration
  70. Design a Control Mechanism for the Power Management of a Standalone Renewable Energy System
  71. Hierarchical control strategy for a three-phase 4-wire microgrid under unbalanced and nonlinear load conditions
  72. Integrated Testing Facilities for International Collaboration on SmartGrid Communications
  73. Non-Isolated DC/DC Buck/Boost Converters for Off-Grid Hybrid Renewable System
  74. Investigation on Dynamic Economic Dispatch Problem of Micro Grid Using Cuckoo Search Algorithm - Grid Connected and Islanded Mode
  75. Primary frequency control of a microgrid with integrated dynamic sectional droop and fuzzy based pitch angle control
  76. Robot DC Servo Motor Parameters Estimation in a closed loop Using BAT Optimisation Algorithm
  77. Electric Vehicle Charging Station for Providing Primary Frequency Control in Microgrid
  78. The relevance of large-scale battery energy storage (BES) application in providing primary frequency control with increased wind energy penetration
  79. Battery Energy Storage System to Stabilize Transient Voltage and Frequency and Enhance Power Export Capability
  80. Optimal sizing and energy management of stand-alone hybrid photovoltaic/wind system based on hydrogen storage considering LOEE and LOLE reliability indices using flower pollination algorithm
  81. Triple Bottom Line Analysis and Optimum Sizing of Renewable Energy Using Improved Hybrid Optimization Employing the Genetic Algorithm: A Case Study from India
  82. Fuzzy logic-based energy management system of stand-alone renewable energy system for a remote area power system
  83. A Novel Maximum Power Point Tracking Method for Photovoltaic Application Using Secant Incremental Gradient Based on Newton Raphson
  84. Analyses of efficiency/energy-savings of DC power distribution systems/microgrids: Past, present and future
  85. A price-regulated electric vehicle charge-discharge strategy for G2V, V2H, and V2G
  86. Techno-economic and environmental analysis of hybrid energy systems for a university in Australia
  87. A Real-Time Simulation Framework for System Protection in Smart Grid Applications
  88. Comparative Study of Optimal Sizing of Renewable Energy System and Triple Bottom Line (TBL) Analysis for a University in Australia
  89. Modelling of an Optimum Fuzzy Logic Controller Using Genetic Algorithm
  90. Optimum Sizing and Economic Analysis of Renewable Energy System Integration into a Micro-Grid for an Academic Institution—A Case Study
  91. Improved Voltage Unbalance and Harmonics Compensation Control Strategy for an Isolated Microgrid
  92. Editorial
  93. A Harmonic Compensation Strategy in a Grid-Connected Photovoltaic System Using Zero-Sequence Control
  94. GOOSE Protocol: IED's Smart Solution for Victoria University Zone Substation (VUZS) Simulator Based on IEC61850 Standard
  95. Guest Editorial - Special Issue on Recent Advances in Power Electronics and Internet of Things
  96. Chaotic Local Search Based Algorithm for Optimal DGPV Allocation
  97. Power Transmission and Distribution Monitoring using Internet of Things (IoT) for Smart Grid
  98. Power system transient stability with aggregated and dispersed penetration of hybrid distributed generation
  99. Hybrid-Renewable Energy Systems in Microgrids
  100. Solar–wind hybrid renewable energy system: current status of research on configurations, control, and sizing methodologies
  101. Hybrid PV–wind renewable energy sources for microgrid application: an overview
  102. Optimum Fuzzy Logic Control System Design using Cuckoo Search Algorithm for Pitch Control of a Wind Turbine
  103. Review of web-based information security threats in smart grid
  104. Integration of IEC 61850 MMS and IEEE 802.22 for Smart Grid Communication
  105. An approach in dual-control of battery energy storage systems in windfarm output power smoothing
  106. Battery energy storage system for transient frequency stability enhancement of a large-scale power system
  107. Design an optimum standalone hybrid renewable energy system for a small town at Portland, Victoria using iHOGA
  108. Design, modeling of an intelligent green building using, actuator sensor interface network protocol
  109. Developing a simulation framework for integrating multi-agent protection system into smart grids
  110. Electricity demand management by optimising the use of HVAC and HWS through AMI
  111. Investigation into the impact of PCC parameters on voltage stability in a DFIG wind farm
  112. Optimal sizing of renewable energy system for a university in Australia
  113. Optimum standalone hybrid renewable energy system design using HOMER for a small community of Portland, Victoria
  114. Powerful IEDs, ethernet networks and their effects on IEC 61850-based electric power utilities security
  115. Supplying the load by the optimization of a stand-alone hybrid power system using firefly algorithm considering reliability indices
  116. Zero-emission renewable energy system model for a community in India
  117. Increase the hosting capacity of four-wire low-voltage supply network for embedded solar generators by optimising generator and load placement on the three supply phases
  118. Review of detection, assessment and mitigation of security risk in smart grid
  119. Perturb and Observe (P&O) based MPPT controller for PV connected brushless DC motor drive
  120. Modelling and Analysis of Practical Options to Improve the Hosting Capacity of Low Voltage Networks for Embedded Photo-Voltaic Generation
  121. Message from the General Chairs
  122. Electricity load forecasting for Urban area using weather forecast information
  123. Review of machine to machine communication in smart grid
  124. Compliance of IEEE 802.22 WRAN for field area network in smart grid
  125. System Identification and Robust Control of Multi-Input Multi-Output Active Magnetic Bearing Systems
  126. Mitigation of Power Quality Problems in Grid-Interactive Distributed Generation System
  127. Review of IEEE 802.22 and IEC 61850 for real-time communication in Smart Grid
  128. Fault Current Characteristics in Distribution Network Interconnected with DFIG
  129. Generation modelling of residential rooftop photovoltaic systems and its applications in practical electricity distribution networks
  130. Robust control of an active magnetic bearing system using H∞ and disturbance observer-based control
  131. Experimental study on servo linear quadratic Gaussian and observer-based sliding mode control for active magnetic bearing system
  132. Fuzzy logic control of DSTATCOM for improving power quality and dynamic performance
  133. Optimal PID-type fuzzy logic controller for a multi-input multi-output active magnetic bearing system
  134. Improving power quality and stability of wind energy conversion system with fuzzy-controlled STATCOM
  135. On two-step controller design for partially unknown unstable systems
  136. IEC61850 GOOSE performance in real time and challenges faced by power utilities
  137. Infrastructure for real-time communication in smart grid
  138. Using IEDScout software for managing multivendor IEC61850 IEDs in substation automation systems
  139. High performance H<inf>∞</inf> control of non-minimum phase Active Magnetic Bearing system
  140. PID-type fuzzy logic controller for active magnetic bearing system
  141. Comprehensive experimental study on the stabilization of active magnetic bearing system
  142. Genetic algorithm optimised fuzzy control of DSTATCOM for improving power quality
  143. Genetic algorithm-based system identification of active magnetic bearing system: A frequency-domain approach
  144. Voltage rise impacts and generation modeling of residential roof-top photo-voltaic systems
  145. H2Optimization and Fuel Cells Application on Electrical Distribution System and Its Commercial Viability in Australia
  146. An adaptive microgrid protection scheme based on a wide-area smart grid communications network
  147. Modeling of a seven-phase series-connected three-motor drive system
  148. Power Quality Conditioner for Microgrid
  149. Interoperability and interchangeability considerations in microgrids employing IEC61850 standard
  150. Stability analysis of a series-connected five-phase induction motor drive system using flux-linkage model
  151. H<inf>2</inf> optimisation and fuel cell as a back-up power for telecommunication sites
  152. A big data challenge - turning smart meter voltage quality data into actionable information
  153. A cost-effective early warning system for improving the reliability of power systems
  154. Reliability of load-sharing systems subject to proportional hazards model
  155. Reliability of phased mission systems with warm standby subsystems
  156. Vector control of a five-phase induction motor supplied by a non-square 3×5 phase matrix converter
  157. An experimental investigation of a solar/wind 4 kW micro generation system and T-1000 1.2 kW PEM fuel cell
  158. Direct duty ratio based pulse-width modulation technique for a three-to-five phase matrix converter for supplying five-phase two-motor drives
  159. Experimental Investigation of H 2 Generator and PEM Fuel Cell as a Remote Area Back-Up Power
  160. Reliability evaluation of phased-mission systems with load-sharing components
  161. Simple carrier-based pulse-width modulation technique for a three-to-quasi-six-phase matrix converter
  162. Carrier based PWM technique for a three-to-six phase matrix converter for supplying six-phase two-motor drives
  163. Multi-vendor portable IEC61850 testing unit
  164. Performance analysis of HTS cables with variable load demand
  165. A novel approach of harmonic analysis in power distribution networks using artificial intelligence
  166. Object Modeling of Data and DataSets in the International Standard IEC 61850
  167. The Application-View Model of the International Standard IEC 61850
  168. Estimation of power factor by the analysis of Power Quality data for voltage unbalance
  169. Real Power Loss Allocation Using Modified Nodal Equations
  170. Real and Reactive Power Transfer Allocation Utilizing Modified Nodal Equations
  171. Development of information-embedded power system using OPNET
  172. The Impact of Underground Cables on Power Transmission and Distribution Networks
  173. HTS cable and its anticipated effects on power transmission networks
  174. Performances of Distribution Transformers Installed in Metallic Enclosures—An Australian Experience
  175. Research and education in Telecommunication Engineering
  176. A Review of substation automation communication protocols
  177. Interoperable CORBA middleware design for substation communication systems
  178. An indirect adaptive fuzzy-logic power system stabiliser
  179. A direct adaptive fuzzy power system stabilizer
  180. A rule-based fuzzy power system stabilizer tuned by a neural network
  181. Tuning of power system stabilizers in multi-machine systems using ise technique
  182. An agent approach to designing protection systems
  183. Network Security Vulnerabilities in SCADA and EMS