All Stories

  1. Effect of initial microstructure on the work hardening behavior of plain eutectoid steel

    Article • Materials Science and Engineering A, April 2015, Elsevier

    Professor Ahmad Kermanpur

  2. Design, fabrication and testing of an apparatus for in-situ investigation of free dendritic growth under an applied electric field

    Article • Journal of Crystal Growth, April 2015, Elsevier

    Professor Ahmad Kermanpur

  3. Warm deformation processing maps for the plain eutectoid steels

    Article • Journal of Alloys and Compounds, March 2015, Elsevier

    Professor Ahmad Kermanpur

  4. Correlation of Mechanical Properties with Fracture Surface Features in a Newly Developed Dual-Phase Steel

    Article • Journal of Materials Engineering and Performance, February 2015, Springer Science + Business Media

    Professor Ahmad Kermanpur

  5. Investigating the effects of short time austenitizing and cooling rate on pearlitic microstructure and mechanical properties of a hot rolled plain eutectoid carbon steel

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Professor Ahmad Kermanpur

  6. Strengthening Mechanisms of Ultrafine Grained Dual Phase Steels Developed by New Thermomechanical Processing

    Article • ISIJ International, January 2015, Iron and Steel Institute of Japan

    Professor Ahmad Kermanpur

  7. Development of a New Ultrafine/Nano Ferrite-Carbide Microstructure by Thermomechanical Processing

    Article • Acta Metallurgica Sinica (English Letters), December 2014, Springer Science + Business Media

    Professor Ahmad Kermanpur

  8. Preferred Crystallographic Orientation Development in Nano/Ultrafine-Grained 316L Stainless Steel During Martensite to Austenite Reversion

    Article • Journal of Materials Engineering and Performance, December 2014, Springer Science + Business Media

    Professor Ahmad Kermanpur

  9. Microstructures and Mechanical Properties of Nano/Ultrafine-Grained N-Bearing, Low-Ni Austenitic Stainless Steels

    Article • Journal of Materials Engineering and Performance, December 2014, Springer Science + Business Media

    Professor Ahmad Kermanpur

  10. A novel route for development of ultrahigh strength dual phase steels

    Article • Materials Science and Engineering A, December 2014, Elsevier

    Professor Ahmad Kermanpur

  11. Microstructural investigation on deformation behavior of high purity Fe–Cr–Ni austenitic alloys during tensile testing at different temperatures

    Article • Materials Science and Engineering A, November 2014, Elsevier

    Professor Ahmad Kermanpur

  12. Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy

    Article • Materials & Design (1980-2015), November 2014, Elsevier

    Professor Ahmad Kermanpur

  13. Nanocrystallization of the Ti50Ni48Co2 Shape Memory Alloy by Thermomechanical Treatment

    Article • Journal of Materials Engineering and Performance, October 2014, Springer Science + Business Media

    Professor Ahmad Kermanpur

  14. Effect of Nitrogen Content on Grain Refinement and Mechanical Properties of a Reversion-Treated Ni-Free 18Cr-12Mn Austenitic Stainless Steel

    Article • Metallurgical and Materials Transactions A, October 2014, Springer Science + Business Media

    Professor Ahmad Kermanpur

  15. Influence of precooling and deformation temperature on microstructure and mechanical properties in a high-manganese austenitic steel

    Article • Materials Science and Engineering A, September 2014, Elsevier

    Professor Ahmad Kermanpur

  16. Effects of initial microstructure and thermomechanical processing parameters on microstructures and mechanical properties of ultrafine grained dual phase steels

    Article • Materials Science and Engineering A, August 2014, Elsevier

    Professor Ahmad Kermanpur

  17. Investigation of the effect of grain size on the strain-induced martensitic transformation in a high-Mn stainless steel using nanoindentation

    Article • Materials Science and Engineering A, August 2014, Elsevier

    Professor Ahmad Kermanpur

  18. Enhanced mechanical properties in a high-manganese austenitic steel through formation of nano grains, nanotwinned austenite grains, nano carbides and TRIP

    Article • Materials Science and Engineering A, July 2014, Elsevier

    Professor Ahmad Kermanpur

  19. The effect of cold rolling and annealing on microstructure and tensile properties of the nanostructured Ni50Ti50 shape memory alloy

    Article • Materials Science and Engineering A, June 2014, Elsevier

    Professor Ahmad Kermanpur

  20. The effect of thermomechanical processing on the microstructure and mechanical properties of the nanocrystalline TiNiCo shape memory alloy

    Article • Materials Science and Engineering A, March 2014, Elsevier

    Professor Ahmad Kermanpur

  21. Effect of annealing temperature on nano/ultrafine grain of Ni-free austenitic stainless steel

    Article • Materials Science and Engineering A, January 2014, Elsevier

    Professor Ahmad Kermanpur

  22. Formation of Nano/ultrafine Grain Structure in a Ti-modified 201L Stainless Steel through Martensite Thermomechanical Treatment

    Article • ISIJ International, January 2014, Iron and Steel Institute of Japan

    Professor Ahmad Kermanpur

  23. Fabrication of the ultrafine-grained ferrite with good resistance to grain growth and evaluation of its tensile properties

    Article • Materials Science and Engineering A, January 2014, Elsevier

    Professor Ahmad Kermanpur

  24. The effects of multi-cyclic thermo-mechanical treatment on the grain refinement and tensile properties of a metastable austenitic steel

    Article • Journal of Alloys and Compounds, January 2014, Elsevier

    Professor Ahmad Kermanpur

  25. Formation of the Nanocrystalline Structure in an Equiatomic NiTi Shape-Memory Alloy by Thermomechanical Processing

    Article • Journal of Materials Engineering and Performance, December 2013, Springer Science + Business Media

    Professor Ahmad Kermanpur

  26. Constitutive model for describing flow behaviour of Fe–18Cr–10Mn–0·39N austenitic stainless steel

    Article • Materials Science and Technology, December 2013, Taylor & Francis

    Professor Ahmad Kermanpur

  27. Laser welding of NiTi shape memory alloy: Comparison of the similar and dissimilar joints to AISI 304 stainless steel

    Article • Optics & Laser Technology, December 2013, Elsevier

    S.K. Sadrnezhaad, Professor Ahmad Kermanpur

  28. Influence of nitrogen alloying on properties of Fe318Cr312Mn3XN austenitic stainless steels

    Article • Materials Science and Engineering A, December 2013, Elsevier

    Professor Ahmad Kermanpur

  29. Influence of Ti microalloying on the formation of nanocrystalline structure in the 201L austenitic stainless steel during martensite thermomechanical treatment

    Article • Materials Science and Engineering A, November 2013, Elsevier

    Professor Ahmad Kermanpur

  30. Investigation of cold rolling variables on the formation of strain-induced martensite in 201L stainless steel

    Article • Materials & Design (1980-2015), April 2013, Elsevier

    Professor Ahmad Kermanpur

  31. Application of Martensitic Transformation Fundamentals to Select Appropriate Alloys for Grain Refining Through Martensite Thermomechanical Treatment

    Article • Metallurgical and Materials Transactions A, March 2013, Springer Science + Business Media

    Professor Ahmad Kermanpur

  32. Synthesis of Graphene/CuO Magnetic Nanocomposite via Solvothermal Processing

    Article • February 2013, Wiley

    Professor Ahmad Kermanpur

  33. Effect of Niobium on the Formation of Nano/Ultrafine Grain Structure in a Low Carbon Steel by Thermomechanical Treatment

    Article • February 2013, Wiley

    Professor Ahmad Kermanpur

  34. Effect of Ti on the Formation of Nano/Ultrafine Grain Structure in the 201L Austenitic Stainless Steel through Martensite Thermomechanical Treatment

    Article • February 2013, Wiley

    Professor Ahmad Kermanpur

  35. Application of Martensitic Transformation Fundamentals to Select Appropriate Alloys for Grain Refining through Martensite Thermomechanical Treatment

    Article • February 2013, Wiley

    Professor Ahmad Kermanpur

  36. Microstructure and mechanical properties of friction stir welded lean duplex stainless steel

    Article • Materials Science and Engineering A, January 2013, Elsevier

    Tohid Saeid, Professor Ahmad Kermanpur

  37. Formation of nano/ultrafine grain structure in a 201 stainless steel through the repetitive martensite thermomechanical treatment

    Article • Materials Letters, December 2012, Elsevier

    Professor Ahmad Kermanpur

  38. Bulk synthesis of ZnO nanoparticles by the one-step electromagnetic levitational gas condensation method

    Article • Ceramics International, September 2012, Elsevier

    Professor Ahmad Kermanpur

  39. Synthesis of aqueous ferrofluids of ZnxFe3−xO4 nanoparticles by citric acid assisted hydrothermal-reduction route for magnetic hyperthermia applications

    Article • Journal of Magnetism and Magnetic Materials, July 2012, Elsevier

    Professor Ahmad Kermanpur

  40. The improvement of ductility in nano/ultrafine grained low carbon steels via high temperature short time annealing

    Article • Materials Letters, May 2012, Elsevier

    Professor Ahmad Kermanpur

  41. Synthesis of high intrinsic loss power aqueous ferrofluids of iron oxide nanoparticles by citric acid-assisted hydrothermal-reduction route

    Article • Journal of Solid State Chemistry, March 2012, Elsevier

    Professor Ahmad Kermanpur

  42. Three-dimensional simulation of quenching process of plain carbon steel gears incorporating phase transformations

    Article • Materials Science and Technology, February 2012, Taylor & Francis

    Professor Ahmad Kermanpur

  43. Comparative study on microstructure and homogeneity of NiTi shape memory alloy produced by copper boat induction melting and conventional vacuum arc melting

    Article • Vacuum, February 2012, Elsevier

    Professor Ahmad Kermanpur

  44. Effects of thermo-mechanical parameters on microstructure and mechanical properties of Ti–50at.%Ni shape memory alloy produced by VAR method

    Article • Materials Science and Engineering A, February 2012, Elsevier

    Professor Ahmad Kermanpur

  45. PROCESSING OF NANO/SUBMICRON GRAINED STAINLESS STEEL 304L BY AN ADVANCED THERMOMECHANICAL PROCESS

    Article • International Journal of Modern Physics Conference Series, January 2012, World Scientific Pub Co Pte Lt

    Professor Ahmad Kermanpur

  46. Effect of Process Parameters on Microstructures and Mechanical Properties of a Nano/ultrafine Grained Low Carbon Steel Produced by Martensite Treatment Using Plane Strain Compression

    Article • ISIJ International, January 2012, Iron and Steel Institute of Japan

    Professor Ahmad Kermanpur

  47. Microstructural investigation on strengthening mechanisms of AISI 304L austenitic stainless steel during cryogenic deformation

    Article • Materials Science and Technology, December 2011, Taylor & Francis

    Dr Peiman Behjati, Professor Ahmad Kermanpur

  48. Effect of reversion annealing on the formation of nano/ultrafine grained structure in 201 austenitic stainless steel

    Article • Materials Science and Engineering A, December 2011, Elsevier

    Professor Ahmad Kermanpur

  49. Formation mechanism of ZnO nanorods produced by the electromagnetic levitational gas condensation method

    Article • Scientia Iranica, December 2011, Elsevier

    Professor Ahmad Kermanpur

  50. Investigating microstructural evolution during homogenization of the equiatomic NiTi shape memory alloy produced by vacuum arc remelting

    Article • Materials Science and Engineering A, October 2011, Elsevier

    Professor Ahmad Kermanpur

  51. The influence of reversion annealing behavior on the formation of nanograined structure in AISI 201L austenitic stainless steel through martensite treatment

    Article • Materials & Design (1980-2015), September 2011, Elsevier

    Professor Ahmad Kermanpur

  52. Production of nano/ultrafine grained AISI 201L stainless steel through advanced thermo-mechanical treatment

    Article • Materials Science and Engineering A, June 2011, Elsevier

    Professor Ahmad Kermanpur

  53. Analytical–experimental approach for accurate depth profile evaluation of diffusion zone in plasma nitrided iron

    Article • Surface Engineering, May 2011, Taylor & Francis

    Professor Ahmad Kermanpur

  54. Application of polymeric quenchant in heat treatment of crack-sensitive steel mechanical parts: Modeling and experiments

    Article • Materials & Design (1980-2015), May 2011, Elsevier

    Professor Ahmad Kermanpur

  55. The effect of bainite in producing nano/ultrafine grained steel by the martensite treatment

    Article • Materials Science and Engineering A, April 2011, Elsevier

    Professor Ahmad Kermanpur

  56. Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds

    Article • Materials Characterization, April 2011, Elsevier

    Professor Ahmad Kermanpur

  57. Electromagnetic-thermal coupled simulation of levitation melting of metals

    Article • Journal of Materials Processing Technology, February 2011, Elsevier

    Professor Ahmad Kermanpur

  58. Producing the nano/ultrafine grained low carbon steel by martensite process using plane strain compression

    Article • Journal of Materials Processing Technology, February 2011, Elsevier

    Professor Ahmad Kermanpur

  59. Gd Substituted Zn-Fe Ferrite Nanoparticles as High T2 MRI Agents

    Article • January 2011, Springer Science + Business Media

    Professor Ahmad Kermanpur

  60. Gd and Zn Co-Substituted Magnetite Nanoparticles as High T2 MRI Agents

    Article • January 2011, Springer Science + Business Media

    Professor Ahmad Kermanpur

  61. Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process

    Article • Materials Science and Engineering A, October 2010, Elsevier

    Professor Ahmad Kermanpur

  62. Numerical simulation and experimental investigation of temperature and residual stresses in GTAW with a heat sink process of Monel 400 plates

    Article • Journal of Materials Processing Technology, October 2010, Elsevier

    Professor Ahmad Kermanpur

  63. Microstructural Evolution in a Low Carbon Steel During Cold Rolling and Subsequent Annealing

    Article • Journal of Nanoscience and Nanotechnology, September 2010, American Scientific Publishers

    Professor Ahmad Kermanpur

  64. Nanoporous Titania-Coated Alumina Membranes: Sol–Gel Synthesis and Characterisation

    Article • Journal of Nanoscience and Nanotechnology, September 2010, American Scientific Publishers

    Professor Ahmad Kermanpur

  65. Synthesis of Aluminum Nanoparticles by Electromagnetic Levitational Gas Condensation Method

    Article • Journal of Nanoscience and Nanotechnology, September 2010, American Scientific Publishers

    Professor Ahmad Kermanpur, Dr M.R. Dadfar

  66. Effects of process parameters on synthesis of Zn ultrafine/nanoparticles by electromagnetic levitational gas condensation

    Article • Advanced Powder Technology, September 2010, Elsevier

    Professor Ahmad Kermanpur

  67. Numerical simulation and experimental investigation of temperature distribution in the circumferentially butt GTAW of Incoloy 800H pipes

    Article • International Journal of Pressure Vessels and Piping, July 2010, Elsevier

    Professor Ahmad Kermanpur

  68. The effect of cold rolling regime on microstructure and mechanical properties of AISI 304L stainless steel

    Article • Journal of Materials Processing Technology, June 2010, Elsevier

    Professor Ahmad Kermanpur

  69. Optimizing the electrode position in sacrificial anode cathodic protection systems using boundary element method

    Article • Corrosion Science, March 2010, Elsevier

    Professor Ahmad Kermanpur

  70. Influence of mould design on the solidification of heavy forging ingots of low alloy steels by numerical simulation

    Article • Materials & Design (1980-2015), March 2010, Elsevier

    Professor Ahmad Kermanpur

  71. Effect of martensite to austenite reversion on the formation of nano/submicron grained AISI 301 stainless steel

    Article • Materials Characterization, November 2009, Elsevier

    Professor Ahmad Kermanpur

  72. Potential application of nanocrystalline 301 austenitic stainless steel in lightweight vehicle structures

    Article • Materials & Design (1980-2015), October 2009, Elsevier

    Professor Ahmad Kermanpur

  73. Effect of strain-induced martensite on the formation of nanocrystalline 316L stainless steel after cold rolling and annealing

    Article • Materials Science and Engineering A, August 2009, Elsevier

    Professor Ahmad Kermanpur

  74. Formation of Nanocrystalline Structure in 301 Stainless Steel Produced by Martensite Treatment

    Article • Metallurgical and Materials Transactions A, July 2009, Springer Science + Business Media

    Professor Ahmad Kermanpur

  75. Formation of nano-grained structure in a 301 stainless steel using a repetitive thermo-mechanical treatment

    Article • Materials Letters, June 2009, Elsevier

    Professor Ahmad Kermanpur

  76. Numerical simulation of continuous cooling of a low alloy steel to predict microstructure and hardness

    Article • Modelling and Simulation in Materials Science and Engineering, May 2009, Institute of Physics Publishing

    Professor Ahmad Kermanpur

  77. Numerical Simulation and Experimental Investigation of Residual Stresses in the Circumferential Butt GTAW of Incoloy 800H Pipes

    Article • Journal of Materials Engineering and Performance, March 2009, Springer Science + Business Media

    Professor Ahmad Kermanpur

  78. Microstructural changes and mechanical properties of Incoloy 800 after 15 years service

    Article • Materials Characterization, March 2009, Elsevier

    Professor Ahmad Kermanpur

  79. Bulk synthesis of monodisperse Fe nanoparticles by electromagnetic levitational gas condensation method

    Article • Materials Letters, February 2009, Elsevier

    Professor Ahmad Kermanpur

  80. Effect of electromagnetic vibration on the unmixed zone formation in 25Cr–35Ni heat resistant steel/Alloy 800 dissimilar welds

    Article • Materials Characterization, December 2008, Elsevier

    Professor Ahmad Kermanpur

  81. Failure analysis of Ti6Al4V gas turbine compressor blades

    Article • Engineering Failure Analysis, December 2008, Elsevier

    Professor Ahmad Kermanpur

  82. Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel

    Article • Materials Characterization, October 2008, Elsevier

    Professor Ahmad Kermanpur

  83. Numerical simulation of metal flow and solidification in the multi-cavity casting moulds of automotive components

    Article • Journal of Materials Processing Technology, September 2008, Elsevier

    Professor Ahmad Kermanpur

  84. Effect of solution annealing on weldability of aged alloy 800/25Cr–35Ni steel dissimilar welds

    Article • Science and Technology of Welding & Joining, September 2008, Taylor & Francis

    Professor Ahmad Kermanpur

  85. Numerical thermal simulation of graphite electrode in EAF during normal operation

    Article • Ironmaking & Steelmaking, August 2008, Taylor & Francis

    Professor Ahmad Kermanpur

  86. Synthesis and characterisation of microporous titania membranes by dip-coating of anodised alumina substrates using sol–gel method

    Article • Journal of Alloys and Compounds, August 2008, Elsevier

    Professor Ahmad Kermanpur

  87. Numerical Simulation and Experimental Investigation of the Failure of a Gas Turbine Compressor Blade

    Article • Key Engineering Materials, July 2008, Trans Tech Publications

    Professor Ahmad Kermanpur

  88. Three-dimensional thermal simulation and experimental investigation of GTAW circumferentially butt-welded Incoloy 800 pipes

    Article • Journal of Materials Processing Technology, April 2008, Elsevier

    Professor Ahmad Kermanpur

  89. Improvement of grain structure and mechanical properties of a land based gas turbine blade directionally solidified with liquid metal cooling process

    Article • Materials Science and Technology, January 2008, Taylor & Francis

    Professor Ahmad Kermanpur

  90. Artificial Neural Network Modeling of High Pressure Descaling Operation in Hot Strip Rolling of Steels

    Article • ISIJ International, January 2008, Iron and Steel Institute of Japan

    Professor Ahmad Kermanpur

  91. An Investigation on Failure Analysis of Titanium Gas Turbine Compressor Blades

    Article • October 2007, CrossRef Test Account

    Professor Ahmad Kermanpur

  92. Improving weldability of aged 25Cr–35Ni heat resistant steel/alloy 800 dissimilar welds

    Article • Science and Technology of Welding & Joining, October 2007, Taylor & Francis

    Professor Ahmad Kermanpur

  93. An Investigation on Failure Analysis of Titanium Gas Turbine Compressor Blades

    Article • Materials Science Forum, October 2007, Trans Tech Publications

    Professor Ahmad Kermanpur

  94. A novel analytical–artificial neural network model to improve efficiency of high pressure descaling nozzles in hot strip rolling of steels

    Article • Materials Science and Technology, August 2007, Taylor & Francis

    Professor Ahmad Kermanpur

  95. Failure characterisation of Ti6Al4V gas turbine compressor blades

    Article • May 2007, WITPRESS LTD.

    Professor Ahmad Kermanpur

  96. Integrated modeling for the manufacture of Ni-based superalloy discs from solidification to final heat treatment

    Article • Metallurgical and Materials Transactions A, September 2005, Springer Science + Business Media

    Professor Ahmad Kermanpur

  97. Integrated model for tracking defects through full manufacturing route of aerospace discs

    Article • Materials Science and Technology, April 2005, Taylor & Francis

    Professor Ahmad Kermanpur

  98. Effect of process parameters on grain structure formation during VAR of INCONEL alloy 718

    Article • Journal of Materials Science, December 2004, Springer Science + Business Media

    Professor Ahmad Kermanpur

  99. Integrated modeling for the manufacture of aerospace discs: Grain structure evolution

    Article • JOM, March 2004, Springer Science + Business Media

    Professor Ahmad Kermanpur

  100. Scalable, continuous variable, cellular automaton model for grain growth during homogenisation of vacuum arc remelted Inconel* 718

    Article • Materials Science and Technology, July 2003, Taylor & Francis

    Professor Ahmad Kermanpur

  101. Author's reply

    Article • Metallurgical and Materials Transactions B, December 2001, Springer Science + Business Media

    Professor Ahmad Kermanpur

  102. Thermal and grain-structure simulation in a land-based turbine blade directionally solidified with the liquid metal cooling process

    Article • Metallurgical and Materials Transactions B, December 2000, Springer Science + Business Media

    Professor Ahmad Kermanpur

  103. Directional solidification of Ni base superalloy IN738LC to improve creep properties

    Article • Materials Science and Technology, May 2000, Taylor & Francis

    Professor Ahmad Kermanpur