Contact

All Stories

  1. An Energy Approach Applied to Define Elasto-Plastic Constitutive Models Describing Thermomechanical Metallic Materials Behavior During Forming Processes

    Article • MATEC Web of Conferences, January 2022, EDP Sciences

    Associate Professor Adinel GAVRUS

  2. An Inverse Analysis Method Applied to Optimization of Specimen’s Shape for Performing Hot Rapid Crushing Tests from Homogeneous Initial Temperature Field

    Article • MATEC Web of Conferences, January 2022, EDP Sciences

    Associate Professor Adinel GAVRUS

  3. Modern Techniques for Remanufacturing Hydraulic Equipment in the Context of Circular Economy and Energy Efficiency

    Article • MATEC Web of Conferences, January 2022, EDP Sciences

    Associate Professor Adinel GAVRUS

  4. New formulation of metallic materials constitutive models by an energy approach

    Article • January 2021, Scipedia, S.L.

    Associate Professor Adinel GAVRUS

  5. Computational Framework Concerning the Formulation of Maximum Work Principle used in Plasticity, Materials Forming and Tribology as a Consequence of a Variational Optimization Problem Defined From the Constructal Law

    Article • IOP Conference Series Materials Science and Engineering, November 2020, Institute of Physics Publishing

    Associate Professor Adinel GAVRUS

  6. Elaboration and Mechanical-Electrochemical Characterisation of Open Cell Antimonial-lead Foams Made by the “Excess Salt Replication Method” for Eventual Applications in Lead-acid Batteries Manufacturing

    Article • Kemija u industriji, January 2020, Croatian Society of Chemical Engineers/HDKI

    Associate Professor Adinel GAVRUS

  7. New Phenomenological Material Constitutive Models for the Description of the Ti6Al4V Titanium Alloy Behavior Under Static and Dynamic Loadings

    Article • Procedia Manufacturing, January 2020, Elsevier

    Associate Professor Adinel GAVRUS

  8. Some aspects regarding the influence of the anisotropy of an AA2021-T351 rolled thick plate on its tribological behaviour

    Article • Mechanics & Industry, January 2019, EDP Sciences

    Associate Professor Adinel GAVRUS

  9. DP600 dual phase steel thermo-elasto-plastic constitutive model considering strain rate and temperature influence on FEM residual stress analysis of laser welding

    Article • Journal of Manufacturing Processes, October 2018, Elsevier

    Associate Professor Adinel GAVRUS

  10. Application of Constructal Theory to Write Mechanical Maximum Work Principle and Equilibrium State of Continuum Media Flow as a Solution of a Variational Optimization Problem

    Article • International Journal of Modeling and Optimization, August 2018, IACSIT Press

    Associate Professor Adinel GAVRUS

  11. Numerical simulation and experimental investigation on the residual stresses in a laser beam welded dual phase DP600 steel plate: Thermo-mechanical material plasticity model

    Article • International Journal of Mechanical Sciences, March 2017, Elsevier

    Associate Professor Adinel GAVRUS

  12. Micro-scratching tests of a rolled aluminium alloy AA2024-T351 thick plate using a diamond micro-blade

    Article • IOP Conference Series Materials Science and Engineering, February 2017, Institute of Physics Publishing

    Associate Professor Adinel GAVRUS

  13. A general computation model based on inverse analysis principle used for rheological analysis of W/O rapeseed and soybean oil emulsions

    Article • January 2017, American Institute of Physics

    Associate Professor Adinel GAVRUS

  14. The maximum work principle regarded as a consequence of an optimization problem based on mechanical virtual power principle and application of constructal theory

    Article • January 2017, American Institute of Physics

    Associate Professor Adinel GAVRUS

  15. Experimental characterization and numerical modeling of the three-dimensional anisotropic behavior of a thick sheet aluminum alloy AA2024-T351 using multi-scale approaches

    Article • September 2016, WITPRESS LTD.

    Associate Professor Adinel GAVRUS

  16. Fractal analysis of surface micro-topography for a rolled anisotropic thick sheet of aluminium alloy AA2024-T351

    Article • IOP Conference Series Materials Science and Engineering, August 2016, Institute of Physics Publishing

    Associate Professor Adinel GAVRUS

  17. Studies Concerning Numerical Prediction of Metal Fibering Obtained by Cold Bulk Forming Using Sensitivity Analysis of Tribological and Rheological Properties on a Cylindrical Crushing Process

    Article • Applied Mechanics and Materials, June 2016, Trans Tech Publications

    Associate Professor Adinel GAVRUS

  18. Modeling grain orientation of DP600 steel by Nd:YAG laser

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Associate Professor Adinel GAVRUS

  19. Numerical analysis of rheological and tribological behavior influence on 16MnCr5 forging fibering

    Article • January 2016, American Institute of Physics

    Associate Professor Adinel GAVRUS

  20. Mechanical and Numerical Analysis Concerning Compressive Properties of Tin-Lead Open-Cell Foams

    Article • Journal of Materials Engineering and Performance, September 2015, Springer Science + Business Media

    Associate Professor Adinel GAVRUS

  21. Formulation of a representative plastic strain and representative plastic strain rate by using a conical indentation on a rigid visco-plastic material

    Article • Materials & Design (1980-2015), March 2015, Elsevier

    Associate Professor Adinel GAVRUS

  22. Experimental and numerical analysis concerning the behaviour of OL50 steel grade specimens coated with polyurea layer under dynamics loadings

    Article • EPJ Web of Conferences, January 2015, EDP Sciences

    Associate Professor Adinel GAVRUS

  23. Formulation de déformation représentative et de vitesse de déformation représentative par indentation sphérique

    Article • Matériaux & Techniques, January 2015, EDP Sciences

    Associate Professor Adinel GAVRUS

  24. Numerical Analysis Concerning the Harmfulness of Crack Turbine Rotors Using a Multi-Scale Approach Based on a Dynamic Finite Element Method

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Associate Professor Adinel GAVRUS

  25. Mechanical behavior analysis of metallic materials using a Finite Element modeling of the SHPB test, a numerical calibration of the bar’s elastic strains and an inverse analysis method

    Article • International Journal of Material Forming, May 2014, Springer Science + Business Media

    Associate Professor Adinel GAVRUS

  26. Applications of Multi-Scale Models to Numerical Simulation and Experimental Analysis of Anisotropic Elastoplastic Behavior of Metallic Sheets

    Article • Key Engineering Materials, May 2014, Trans Tech Publications

    Associate Professor Adinel GAVRUS

  27. Analysis of Metallic Materials Behavior during Severe Loadings Using a FE Modeling of the SHPB Test Based on a Numerical Calibration of Elastic Strains with Respect to the Raw Measurements and on the Inverse Analysis Principle

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Associate Professor Adinel GAVRUS

  28. Finite Element Analysis of the Influence of the Material Constitutive Law Formulation on the Chip Formation Process During a High Speed Metal Cutting

    Article • July 2012, ASME International

    Associate Professor Adinel GAVRUS

  29. An optimal forward extrusion device proposed for numerical and experimental analysis of materials tribological properties corresponding to bulk forming processes

    Article • Tribology International, March 2012, Elsevier

    Associate Professor Adinel GAVRUS

  30. Constitutive Equation for Description of Metallic Materials Behavior during Static and Dynamic Loadings Taking into Account Important Gradients of Plastic Deformation

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Associate Professor Adinel GAVRUS

  31. Analysis of the Anisotropic Behavior and of the Formability Aptitude for an AA2024 Alloy Using the Channel Die Compression Test and the Simple Tension Test

    Article • Key Engineering Materials, February 2012, Trans Tech Publications

    Associate Professor Adinel GAVRUS

  32. An Anisotropic Behaviour Analysis of AA2024 Aluminium Alloy Undergoing Large Plastic Deformations

    Article • February 2011, IntechOpen

    Associate Professor Adinel GAVRUS

  33. Aluminium Alloys, Theory and Applications

    Article • February 2011, IntechOpen

    Associate Professor Adinel GAVRUS

  34. Identification of Friction Parameters from the Inverse Analysis of a Direct Extrusion Test

    Article • January 2011, American Institute of Physics

    Associate Professor Adinel GAVRUS

  35. An Inverse Analysis of the Erichsen Test Applied for the Automatic Identification of Sheet Materials Behavior

    Article • Engineering, January 2010, Scientific Research Publishing, Inc,

    Associate Professor Adinel GAVRUS

  36. An Inverse Analysis of the Erichsen Test Applied for the Automatic Identification of Sheet Materials Behavior

    Article • Engineering, January 2010, Scientific Research Publishing, Inc,

    Associate Professor Adinel GAVRUS

  37. Minimization of Friction Influence on the Evaluation of Rheological Parameters From Compression Test: Application to a Forging Steel Behavior Identification

    Article • Journal of Engineering Materials and Technology, January 2009, ASME International

    Associate Professor Adinel GAVRUS

  38. Formulation of a new constitutive equation available simultaneously for static and dynamic loadings

    Article • January 2009, EDP Sciences

    Associate Professor Adinel GAVRUS

  39. Numerical modeling of integrally stiffened structures forming from creep age forming technique

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Associate Professor Adinel GAVRUS

  40. An inverse analysis approach of the Erichsen test starting from a finite element model

    Article • International Journal of Material Forming, April 2008, Springer Science + Business Media

    Associate Professor Adinel GAVRUS

  41. Two-step procedure for identification of metal behavior from dynamic compression tests

    Article • International Journal of Impact Engineering, July 2007, Elsevier

    Associate Professor Adinel GAVRUS

  42. Formulation of anisotropic Hill criteria for the description of an aluminium alloy behaviour during the channel die compression test

    Article • January 2007, American Institute of Physics

    Associate Professor Adinel GAVRUS

  43. A study of material constitutive behaviour at elevated temperature from compressive SHPB test using an inverse analysis method

    Article • Journal de Physique IV (Proceedings), July 2006, EDP Sciences

    Associate Professor Adinel GAVRUS

  44. Forming Process of a 5083 Aluminium Alloy. Constitutive Model Covering a Large Range of Temperature

    Article • International Journal of Forming Processes, June 2006, Lavoisier

    Associate Professor Adinel GAVRUS

  45. An experimental and numerical analysis of the heat transfer problem in SHPB at elevated temperatures

    Article • Measurement Science and Technology, September 2005, Institute of Physics Publishing

    Associate Professor Adinel GAVRUS

  46. Study of the mechanical behaviour of zirconium 702αin correlation with the texture determined by X-ray diffraction

    Article • Revue de Métallurgie, December 2003, EDP Sciences

    Associate Professor Adinel GAVRUS

  47. A constitutive law for the mechanical behavior of Zr 702α

    Article • Journal of Materials Processing Technology, November 2003, Elsevier

    Associate Professor Adinel GAVRUS

  48. Identification du comportement d'un acier en compression : du quasi-statique au dynamiqueIdentification of a steel compression behaviour: from quasi static approach to dynamic one

    Article • Mécanique & Industries, October 2003, Elsevier

    Associate Professor Adinel GAVRUS

  49. Model of dynamic compression tests on hydraulic testing machines: Influence of dynamic phenomena

    Article • Journal de Physique IV (Proceedings), September 2003, EDP Sciences

    Associate Professor Adinel GAVRUS

  50. Model of dynamic compression tests on hydraulic testing machines: Influence of dynamic phenomena

    Article • Journal de Physique IV (Proceedings), September 2003, EDP Sciences

    Associate Professor Adinel GAVRUS

  51. Analysis of the dynamic SHPB test using the finite element simulation

    Article • Journal de Physique IV (Proceedings), September 2003, EDP Sciences

    Associate Professor Adinel GAVRUS

  52. Analysis of the dynamic SHPB test using the finite element simulation

    Article • Journal de Physique IV (Proceedings), September 2003, EDP Sciences

    Associate Professor Adinel GAVRUS

  53. Analysis of a Constitutive Model for the Simulation of Dynamic Forming Processes

    Article • International Journal of Forming Processes, March 2003, Lavoisier

    Associate Professor Adinel GAVRUS

  54. Identification of anisotropic Hill criteria from the channel die compression test. Application to a normal anisotropy of zirconium 702α

    Article • Journal de Physique IV (Proceedings), March 2003, EDP Sciences

    Associate Professor Adinel GAVRUS

  55. Thermo-viscoplastic parameter identification formulated as an inverse finite element analysis of the hot torsion test

    Article • Steel Research, July 1999, Wiley

    Associate Professor Adinel GAVRUS

  56. The rheological parameter identification formulated as an inverse finite element problem

    Article • Inverse Problems in Engineering, February 1999, Taylor & Francis

    Associate Professor Adinel GAVRUS

  57. The analysis of inelastic behaviour formulated as an inverse rheological approach

    Article • Measurement Science and Technology, June 1998, Institute of Physics Publishing

    Associate Professor Adinel GAVRUS

  58. Identification du comportement rhéologique par analyse inverse

    Article • Revue Européenne des Éléments Finis, January 1998, Taylor & Francis

    Associate Professor Adinel GAVRUS

  59. An inverse analysis using a finite element model for identification of rheological parameters

    Article • Journal of Materials Processing Technology, June 1996, Elsevier

    Associate Professor Adinel GAVRUS