All Stories

  1. Laser micro-engraving and heat treatment to enhance cell adhesion on DMLS-processed nickel alloy

    Article • Canadian Metallurgical Quarterly, June 2026, Taylor & Francis

    Adam khan

  2. Design and mechanical evaluation of solid and gyroid lattice SS316L structures fabricated via laser powder bed fusion

    Article • Interactions, May 2026, Springer Science + Business Media

    Adam khan

  3. Investigation on Surface Science and Cell Viability of Laser Micro Engraved DMLS TI64 Alloy

    Article • Journal of Bio- and Tribo-Corrosion, November 2025, Springer Science + Business Media

    Adam khan

  4. Experimental investigation and assessment of aqueous corrosion on Stellite cladded Ni, Fe and Cu base alloys

    Article • Canadian Metallurgical Quarterly, July 2025, Taylor & Francis

    Adam khan

  5. Contemporary study on 3D printing and its advancement for industrial applications

    Article • Multiscale and Multidisciplinary Modeling Experiments and Design, July 2025, Springer Science + Business Media

    Adam khan

  6. Enhancing drilling performance in 3D printed PLA implants application of PIV and ML models

    Article • Scientific Reports, April 2025, Springer Science + Business Media

    Adam khan

  7. Enhancing mechanical and erosive properties of hybrid polymer composites using synergistic fiber-filler interactions

    Article • Composites and Advanced Materials, January 2025, SAGE Publications

    Adam khan

  8. Micro-engraving on modified nickel-base superalloy using a short-pulsed laser source

    Article • Canadian Metallurgical Quarterly, January 2025, Taylor & Francis

    Adam khan

  9. The effect of high SiC ratio on the physical, mechanical, tribological and corrosion behavior of Al2024 alloy matrix composites fabricated by powder metallurgy

    Article • Journal of Composite Materials, January 2025, SAGE Publications

    Adam khan

  10. Advances in Composite and Advanced Materials Machining

    Article • January 2025, Taylor & Francis

    Adam khan

  11. Optimization of Curing Time for the Fabrication of Raw Edged Cogged Belt with Enhanced Breaking Strength

    Article • January 2025, Springer Science + Business Media

    Dr Samuel Ratna Kumar P S, Adam khan

  12. 3D Design Making of Eco-friendly Toys

    Article • January 2025, Springer Science + Business Media

    Adam khan

  13. Augmented Reality and Its Application: A Critical Review

    Article • January 2025, Springer Science + Business Media

    Adam khan

  14. Evaluation of Mechanical Properties of Welds Fabricated at a Close Proximity on Offshore Structures

    Article • January 2025, Springer Science + Business Media

    Adam khan

  15. Investigation of Textured Tools in the Cutting of Distinct Materials

    Article • January 2025, Springer Science + Business Media

    Adam khan

  16. Natural Water Hyacinth (Eichhornia crassipes) Fibers: Distinctly Different Extraction Methods and Morphological Properties

    Article • January 2025, Springer Science + Business Media

    Adam khan

  17. Review of the Machining and Machinability of Nickel–Titanium Alloy Using Various Types of Energy

    Article • January 2025, Springer Science + Business Media

    Adam khan

  18. Assessment on heat treatment and machinability of DMLS-processed Ti64 alloy

    Article • Progress in Additive Manufacturing, November 2024, Springer Science + Business Media

    Adam khan

  19. Maximizing efficiency in C45 steel machining: an integrated AI-based approach to coated insert optimization

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), October 2024, Springer Science + Business Media

    Adam khan

  20. Assessment of ridge regression-based machine learning model for the prediction of automotive sales based on the customer requirements

    Article • Interactions, September 2024, Springer Science + Business Media

    Adam khan

  21. Investigations on the dielectric properties of solution-casted B4C and PbO dispersed epoxy composites

    Article • Interactions, September 2024, Springer Science + Business Media

    Adam khan

  22. Investigating the impact of heat treatment of direct metal laser sintered Ti6Al4 V and inconel 718 alloys

    Article • Interactions, August 2024, Springer Science + Business Media

    Adam khan

  23. Studies on design and analysis of gyroid structure using additive manufacturing process

    Article • Interactions, August 2024, Springer Science + Business Media

    Adam khan

  24. Studies on machining performance and surface quality of nickel based super alloy using micro drilling process

    Article • Interactions, June 2024, Springer Science + Business Media

    Adam khan

  25. Developments in Materials for High-Temperature Corrosion and Oxidation

    Article • High Temperature Corrosion of Materials, March 2024, Springer Science + Business Media

    Adam khan

  26. Experiment assessment and Adam gene algorithm to optimize the process parameter of wire spark erosion material removal while machining nickel alloy

    Article • Multiscale and Multidisciplinary Modeling Experiments and Design, January 2024, Springer Science + Business Media

    Adam khan

  27. Experimental assessment and Adam gene algorithm to optimize the process parameter for micro profile cutting on CM247 alloy using pulsed laser machining process

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), July 2023, Springer Science + Business Media

    Adam khan

  28. Development of hybrid composite with natural fillers for mechanical property and machinability study

    Article • Progress in Rubber Plastics and Recycling Technology, June 2023, SAGE Publications

    Adam khan

  29. Development and assessment on hemp–carbon–basalt fibre base hybrid composite with organic fillers for structural applications

    Article • International Journal of Polymer Analysis and Characterization, May 2023, Taylor & Francis

    Adam khan

  30. A study on design, development, optimization and validation of product development framework for humidifier chamber

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), February 2023, Springer Science + Business Media

    Adam khan

  31. Preparation of novel in-situ layered B4C and PbO reinforced solution casted layered polymer composites (SCLPC) for augmenting the gamma irradiation shielding capability

    Article • Vacuum, January 2023, Elsevier

    Adam khan

  32. The Influence of Shock Wave Surface Treatment on Vibration Behavior of Semi-Solid State Cast Aluminum—Al2SiO5 Composite

    Article • Crystals, November 2022, MDPI AG

    Dr Samuel Ratna Kumar P S, Adam khan

  33. Boron carbide dispersed epoxy composites for gamma radiation shielding applications

    Article • Vacuum, November 2022, Elsevier

    Adam khan

  34. Development of Lightweight Polymer Laminates for Radiation Shielding and Electronics Applications

    Article • International Journal of Polymer Science, October 2022, Wiley

    Adam khan

  35. Influence of short-pulsed laser and its thermal effect on micromachining of NiTi alloy

    Article • Sadhana, October 2022, Springer Science + Business Media

    Adam khan

  36. Biocompatibility Study Over WEDM Machined Surface of Stainless Steel Human Implant Material

    Article • September 2022, Springer Science + Business Media

    Dr RAJKUMAR Kaliyamoorthy, Dr Samuel Ratna Kumar P S, Adam khan

  37. Estimation of the Wear Resistance in Electroless Composite Substrates Using a Novel Coating and Microwave Heat Treatment Method

    Article • September 2022, Springer Science + Business Media

    Adam khan

  38. Surface and Interface Analysis on Plasma Spray Coating on Superalloys at Elevated Temperature

    Article • September 2022, Springer Science + Business Media

    Adam khan

  39. Assessing Machinability and Surface characteristics of a Shape Memory Alloy (SMA) Processed through Wire Electro Spark Erosion Method

    Article • Archives of Metallurgy and Materials, August 2022, Polish Academy of Sciences Chancellery

    Adam khan

  40. Experimental studies on biomachining process using novel Thiobacillus novellus microorganism — a comparative study

    Article • Biomass Conversion and Biorefinery, August 2022, Springer Science + Business Media

    Adam khan

  41. Creep behaviour of shock-wave-surface-treated aluminium–MWCNT nanocomposites

    Article • Emerging Materials Research, June 2022, ICE Publishing

    Dr Samuel Ratna Kumar P S, Adam khan

  42. Experimental investigation on mechanical, thermal behaviour and characterisation analysis of aquatic waste water hyacinth plant fibre, powder and ash reinforced polymer composite material – Dangerous aquatic threat into successive product approach

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, April 2022, SAGE Publications

    Dr Siva Irulappasamy, Adam khan

  43. Studies on Mechanical Attrition and Surface Analysis on Heat-Treated Nickel Alloy Developed through Additive Manufacturing

    Article • Advances in Materials Science and Engineering, April 2022, Wiley

    Adam khan

  44. A polymer resin matrix modified by coconut filler and its effect on structural behavior of glass fiber-reinforced polymer composites

    Article • Iranian Polymer Journal, March 2022, Springer Science + Business Media

    Adam khan

  45. Sustainable design and development of commercial system cleanser unit for trimmers

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, March 2022, SAGE Publications

    Adam khan

  46. Investigations on Mechanical Properties of Bio-Waste Micro Particles Reinforced Phenol Formaldehyde Composites

    Article • Archives of Metallurgy and Materials, February 2022, Polish Academy of Sciences Chancellery

    Adam khan

  47. Evaluation of mechanical properties and thermal characteristics of aquatic waste water hyacinth ( Eichhornia crassipes ) plant into natural powder and ash reinforced polymer composites for lightweight appl...

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, February 2022, SAGE Publications

    Adam khan

  48. Investigation of water, chemical absorption and mechanical properties of water hyacinth (Eichhornia Crassipes) aquatic plant powder, ash composites for commercial applications

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr Siva Irulappasamy, Adam khan

  49. CED productivity improvement through conveyor jig density optimization

    Article • Materials Today Proceedings, January 2022, Elsevier

    Adam khan

  50. Design and analysis on textured cutting tool

    Article • Materials Today Proceedings, January 2022, Elsevier

    Adam khan

  51. Design and simulation of skate scooter made of composite material

    Article • Materials Today Proceedings, January 2022, Elsevier

    Adam khan

  52. EDM process parameter optimization using response surface methodology for Ni-Ti shape memory alloy

    Article • Materials Today Proceedings, January 2022, Elsevier

    Adam khan

  53. Numerical analysis of 3D printed Inconel 718 superalloy for mechanical properties and solid particle erosion studies

    Article • Materials Today Proceedings, January 2022, Elsevier

    Adam khan

  54. Optimal resource scheduling for SMEs using cloud in manufacturing sectors

    Article • Materials Today Proceedings, January 2022, Elsevier

    Adam khan

  55. Extraction and Characterization of Natural Aquatic Plant Fiber, Powder and Ash from Water Hyacinth (Eichhornia crassipes) as Reinforcement of Fiber, Powder, and Ash Reinforced Polymer Composite

    Article • Journal of Natural Fibers, November 2021, Taylor & Francis

    Adam khan

  56. Effect of fumed silica in rice bran wax-epoxy coating on aluminum substrate: mechanical, thermal, and water absorption properties

    Article • Biomass Conversion and Biorefinery, September 2021, Springer Science + Business Media

    Adam khan

  57. Design and Development of a Commercial Hair Trimmer Cleaner Unit

    Article • August 2021, Springer Science + Business Media

    Adam khan

  58. Experimental Investigation of Thrust Force, Delamination and Surface Roughness in Drilling Hybrid Structural Composites

    Article • Materials, August 2021, MDPI AG

    Adam khan

  59. Solid particle erosion studies of thermally deposited alumina-titania coatings on an aluminum alloy

    Article • International Journal of Minerals Metallurgy and Materials, July 2021, Springer Science + Business Media

    Adam khan

  60. Solid particle erosion studies on heat treated SU718 alloy developed through DMLS processed additive manufacturing

    Article • Advances in Materials and Processing Technologies, June 2021, Taylor & Francis

    Adam khan

  61. Machining parameter optimization using Adam – Gene Algorithm while turning lightweight composite using ceramic cutting tools

    Article • International Journal of Lightweight Materials and Manufacture, June 2021, Elsevier

    Adam khan

  62. Abrasive water jet cutting process form machining metals and composites for engineering applications: A review

    Article • Engineering Research Express, May 2021, Institute of Physics Publishing

    Adam khan

  63. Studies on SU718 alloy developed using laser sintering on the additive manufacturing process

    Article • Optik, March 2021, Elsevier

    Adam khan

  64. Effect of Magnetic Field, Heat Treatment and Dry Wear Analysis on Electroless Nickel Deposits

    Article • Journal of Bio- and Tribo-Corrosion, January 2021, Springer Science + Business Media

    Adam khan

  65. A review: Machinability studies on human implant materials

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  66. Application of data computing for resource scheduling in manufacturing industries

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  67. Effect of modified method of coating on particle incorporation and wear resistance of nickel – phosphorus – diamond composite coatings

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  68. Erosion studies of SS316L using water jet machine (WJM) for the piping applications

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  69. Influence of heat treatment over electroless crystallinity of electroless nickel deposition

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  70. Machining parameter optimization using Adam gene algorithm for electro spark erosion on shape memory alloy

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  71. Novel deposition process on improving the efficiency and crystallographic aspects of electroless deposits

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  72. Optimization of solar tunnel dryer for mango slice using response surface methodology

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  73. Studies on Dry Sliding Wear and Solid Particle Erosive Wear Behaviours of Natural Fibre Composite Developed from Water Hyacinth Aquatic Plant for Automotive Application

    Article • Advances in Materials Science and Engineering, January 2021, Wiley

    Adam khan

  74. Thermal barrier coatings for high temperature applications – A short review

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  75. Wear study and elaborate the parametric effect on cupronickel metal matrix

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  76. Geometric characteristics analysis of hole making through abrasive water jet drilling

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  77. Mechanical and thermal insulation properties of surface-modified Agave Americana/carbon fibre hybrid reinforced epoxy composites

    Article • Materials Today Proceedings, January 2021, Elsevier

    Adam khan

  78. Studies on effect of laser processed stellite 6 material and its electrochemical behavior

    Article • Optik, October 2020, Elsevier

    Adam khan

  79. Direct metal laser sintered (DMLS) process to develop Inconel 718 alloy for turbine engine components

    Article • Optik, February 2020, Elsevier

    Adam khan

  80. Biocompatibility and Surface Studies on Electrospark-Machined Titanium-Based Human Implants

    Article • Journal of Bio- and Tribo-Corrosion, January 2020, Springer Science + Business Media

    Adam khan

  81. A study on machinability of nickel based superalloy using micro-textured tungsten carbide cutting tools

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Adam khan

  82. Electrochemical behaviour of human implant material after WEDM machining process

    Article • Materials Today Proceedings, January 2020, Elsevier

    Adam khan

  83. Machinability Studies on Abrasive Water Jet Machining of Low Alloy Steel for Different Thickness

    Article • IOP Conference Series Materials Science and Engineering, January 2020, Institute of Physics Publishing

    Adam khan

  84. Studies on surface quality of stainless steel implant material while machining with WEDM process

    Article • International Journal of Machining and Machinability of Materials, January 2020, Inderscience Publishers

    Adam khan

  85. Surface Roughness and Morphology Studies on Machining Hybrid Composite Material Using Abrasive Water Jet Cutting Process

    Article • January 2020, Springer Science + Business Media

    Adam khan

  86. Surface morphology investigation of miniature gears manufactured by abrasive water jet machining

    Article • International Journal of Surface Science and Engineering, January 2020, Inderscience Publishers

    Adam khan

  87. Analysis of surface properties of tungsten carbide (WC) coating over austenitic stainless steel (SS316) using plasma spray process

    Article • Materials Today Proceedings, January 2020, Elsevier

    Adam khan

  88. On Heat Treatment and Surface Characterization of Spark Eroded Nickel-Based Superalloy Developed by Additive Manufacturing

    Article • Transactions of the Indian Institute of Metals, December 2019, Springer Science + Business Media

    Adam khan

  89. Influence of Natural Filler on Mechanical Properties of Hemp/Kevlar Hybrid Green Composite and Analysis of Change in Material Behavior Using Acoustic Emission

    Article • Journal of Natural Fibers, November 2019, Taylor & Francis

    Adam khan

  90. Experimental evaluation of surface quality characteristics in laser machining of nickel-based superalloy

    Article • Optik, November 2019, Elsevier

    Adam khan

  91. Studies on heat treatment and electrochemical behaviour of 3D printed DMLS processed nickel-based superalloy

    Article • Applied Physics A, September 2019, Springer Science + Business Media

    Adam khan

  92. Electrochemical Behaviour and Surface Studies on Austenitic Stainless Steel and Nickel-Based Superalloy Dissimilar Weld Joints

    Article • June 2019, Springer Science + Business Media

    Adam khan

  93. High temperature oxidation behavior of thermally sprayed alumina—titania coatings on nickel based superalloys

    Article • Materials Research Express, May 2019, Institute of Physics Publishing

    Adam khan

  94. Processing of titanium-based human implant material using wire EDM

    Article • Materials and Manufacturing Processes, March 2019, Taylor & Francis

    Adam khan

  95. Machining Ni-Cr-Fe based superalloy using abrasive water jet cutting process and its surface studies

    Article • Materials Today Proceedings, January 2019, Elsevier

    Adam khan

  96. Solid particle erosion studies on fibre composite with egg shell as filler materials

    Article • International Journal of Surface Science and Engineering, January 2019, Inderscience Publishers

    Adam khan

  97. Microdrilling of AA (6351)-SiC-B4C Composite Using Hybrid Micro-ECDM Process

    Article • Journal of Testing and Evaluation, November 2018, ASTM International

    Adam khan

  98. Impact of alkali treatment on physico-chemical, thermal, structural and tensile properties of Carica papaya bark fibers

    Article • International Journal of Polymer Analysis and Characterization, August 2018, Taylor & Francis

    Dr Sanjay M R, Adam khan

  99. Hot corrosion behaviour of nickel–iron-based superalloy in gas turbine application

    Article • International Journal of Ambient Energy, July 2018, Taylor & Francis

    Adam khan

  100. A brief review on the erosion-corrosion behavior of engineering materials

    Article • Corrosion Reviews, June 2018, De Gruyter

    Adam khan

  101. Experimental Investigation on Machinability of Inconel 800 Using CNC WEDM and Modeling of Process Parameters

    Article • Journal of Advanced Microscopy Research, June 2018, American Scientific Publishers

    Adam khan

  102. Effect of Tool Wear on Machining GFRP and AISI D2 Steel Using Alumina Based Ceramic Cutting Tools

    Article • Silicon, April 2018, Springer Science + Business Media

    Adam khan

  103. Hybrid Composite Material and Solid Particle Erosion Studies

    Article • IOP Conference Series Materials Science and Engineering, April 2018, Institute of Physics Publishing

    Adam khan

  104. Machinability of nickel based alloys using electrical discharge machining process

    Article • IOP Conference Series Materials Science and Engineering, April 2018, Institute of Physics Publishing

    Adam khan

  105. Cyclic Oxidation and Hot Corrosion Behavior of Nickel–Iron-Based Superalloy

    Article • High Temperature Materials and Processes, January 2018, De Gruyter

    Adam khan

  106. Hot corrosion behaviour of Super 304H for marine applications at elevated temperatures

    Article • Anti-Corrosion Methods and Materials, September 2017, Emerald

    Adam khan

  107. Laser-treated austenitic steel and nickel alloy for human implants

    Article • Materials and Manufacturing Processes, August 2017, Taylor & Francis

    Adam khan

  108. Surface texturing by dimple formation in TiAlSiZr alloy using μ-EDM

    Article • Journal of the Australian Ceramic Society, June 2017, Springer Science + Business Media

    Adam khan

  109. Studies on thermally grown oxide as an interface between plasma-sprayed coatings and a nickel-based superalloy substrate

    Article • International Journal of Minerals Metallurgy and Materials, May 2017, Springer Science + Business Media

    Adam khan

  110. Some experimental investigations on drilling AA (6351)-SiC-B4C composite

    Article • Materials and Manufacturing Processes, January 2017, Taylor & Francis

    Adam khan

  111. Investigation of structural integrity and corrosion behaviour of thermal barrier coating

    Article • International Journal of Materials and Product Technology, January 2017, Inderscience Publishers

    Adam khan

  112. Design and statistical analysis of plasma coatings on superalloy for gas turbine applications

    Article • Materials at High Temperatures, October 2016, Taylor & Francis

    Adam khan

  113. Sliding wear behaviour of plasma sprayed coatings on nickel based superalloy

    Article • Surface Engineering, March 2016, Maney Publishing

    Adam khan

  114. Machinablity of Hybrid Natural Fiber Composite with and without Filler as Reinforcement

    Article • Materials and Manufacturing Processes, November 2015, Taylor & Francis

    Adam khan

  115. Machinability of Nickel-Based Superalloy by Abrasive Water Jet Machining

    Article • Materials and Manufacturing Processes, October 2015, Taylor & Francis

    Adam khan

  116. Electrochemical polarisation studies on plasma-sprayed nickel-based superalloy

    Article • Applied Physics A, June 2015, Springer Science + Business Media

    Adam khan

  117. Influence of plasma coatings on Inconel 617 for gas turbine applications

    Article • Surface Engineering, September 2014, SAGE Publications

    Adam khan

  118. Oxidation and Hot Corrosion Behavior of Nickel-Based Superalloy for Gas Turbine Applications

    Article • Materials and Manufacturing Processes, July 2014, Taylor & Francis

    Mr Mohandas Eladath, Adam khan

  119. Hot Corrosion Behaviour of Inconel 617 in Mixed Salt Environment at 900 and 1000 °C for Gas Turbine Applications

    Article • High Temperature Materials and Processes, January 2014, De Gruyter

    Adam khan

  120. A hybrid algorithm to optimize cutting parameter for machining GFRP composite using alumina cutting tools

    Article • The International Journal of Advanced Manufacturing Technology, August 2011, Springer Science + Business Media

    Adam khan

  121. Machinability of glass fibre reinforced plastic (GFRP) composite using alumina-based ceramic cutting tools

    Article • Journal of Manufacturing Processes, January 2011, Elsevier

    Adam khan

  122. MACHINING PARAMETERS OPTIMIZATION FOR ALUMINA BASED CERAMIC CUTTING TOOLS USING GENETIC ALGORITHM

    Article • Machining Science and Technology, December 2006, Taylor & Francis

    Adam khan