All Stories

  1. Significant improvement in cutting rate during WEDM of clad-composite using zinc-coated wire

    Article • Materials and Manufacturing Processes, September 2019, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  2. Analysis and Realization of Sampling Strategy in Coordinate Metrology

    Article • Mathematical Problems in Engineering, July 2019, Hindawi Publishing Corporation

    Professor Abdulrahman M Al- Ahmari

  3. Investigation on material mixing during FSW of AA7475 to AISI304

    Article • Materials and Manufacturing Processes, November 2018, Taylor & Francis

    Dr ZAHID A. KHAN, Professor Abdulrahman M Al- Ahmari, Dr ARSHAD NOOR SIDDIQUEE

  4. Performance Evaluation of Vehicular Platoons using Webots

    Article • IET Intelligent Transport Systems, May 2017, the Institution of Engineering and Technology (the IET)

    Professor Abdulrahman M Al- Ahmari, Zhiwu Li

  5. Semi-Immersive Virtual Turbine Engine Simulation System

    Article • International Journal of Turbo and Jet Engines, January 2017, De Gruyter

    Mr MUSTUFA HAIDER ABIDI, Professor Abdulrahman M Al- Ahmari

  6. A Multistep Look-Ahead Deadlock Avoidance Policy for Automated Manufacturing Systems

    Article • Discrete Dynamics in Nature and Society, January 2017, Hindawi Publishing Corporation

    Professor Abdulrahman M Al- Ahmari, Zhiwu Li

  7. Analysis of a multimachine flexible manufacturing cell using stochastic Petri nets

    Article • Advances in Mechanical Engineering, November 2016, SAGE Publications

    Professor Abdulrahman M Al- Ahmari

  8. A comparative study on the customized design of mandibular reconstruction plates using finite element method

    Article • Advances in Mechanical Engineering, June 2015, SAGE Publications

    Professor Abdulrahman M Al- Ahmari

  9. Developing a methodology for analysis and manufacturing of proximal interphalangeal (PIP) joint using rapid prototyping technique

    Article • Rapid Prototyping Journal, June 2015, Emerald

    Professor Abdulrahman M Al- Ahmari

  10. A Hybrid Machining Process Combining Micro-EDM and Laser Beam Machining of Nickel–Titanium-Based Shape Memory Alloy

    Article • Materials and Manufacturing Processes, March 2015, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  11. Optimizing parameters of freeform surface reconstruction using CMM

    Article • Measurement, March 2015, Elsevier

    Professor Abdulrahman M Al- Ahmari

  12. Finite element analysis of finger joint implant: A review

    Article • March 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  13. Virtual reality for manufacturing: A robotic cell case study

    Article • March 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  14. Haptics Assisted Virtual Assembly

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Professor Abdulrahman M Al- Ahmari

  15. FINITE ELEMENT MODELING OF THE ORTHOGONAL MACHINING OF PARTICLE REINFORCED ALUMINUM BASED METAL MATRIX COMPOSITES

    Article • MM Science Journal, December 2014, MM Publishing, s.r.o.

    Professor Abdulrahman M Al- Ahmari

  16. Confusion avoidance for discrete event systems by P/E constraints and supervisory control

    Article • IMA Journal of Mathematical Control and Information, October 2014, Oxford University Press (OUP)

    Professor Abdulrahman M Al- Ahmari

  17. Feature-based design approach for integrated CAD and computer-aided inspection planning

    Article • The International Journal of Advanced Manufacturing Technology, October 2014, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari

  18. An automatic fixture modeling system using search strategy

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, September 2014, SAGE Publications

    Professor Abdulrahman M Al- Ahmari

  19. Digital design and fabrication of customized mandible implant

    Article • August 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  20. The influence of surface topology on the quality of the point cloud data acquired with laser line scanning probe

    Article • Sensor Review, June 2014, Emerald

    Professor Abdulrahman M Al- Ahmari

  21. Corrections to “Nonpure Petri Net Supervisors for Optimal Deadlock Control of Flexible Manufacturing Systems” [Mar 13 252-265]

    Article • IEEE Transactions on Systems Man and Cybernetics Systems, June 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  22. Accuracy of a reverse-engineered mould using contact and non-contact measurement techniques

    Article • International Journal of Computer Integrated Manufacturing, February 2014, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  23. CAD Issues in Additive Manufacturing

    Article • January 2014, Elsevier

    Professor Abdulrahman M Al- Ahmari

  24. Enhance performance of inspection process on Coordinate Measuring Machine

    Article • Measurement, January 2014, Elsevier

    Professor Abdulrahman M Al- Ahmari

  25. Statistical Analysis of Automatic Scanning of a Car Roof

    Article • January 2014, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari, Mr Islam Sharaf

  26. Extended Elementary Siphons and Their Application to Liveness-Enforcement of Generalized Petri Nets

    Article • Asian Journal of Control, November 2013, Wiley

    Professor Abdulrahman M Al- Ahmari

  27. A versatile supervisor with one monitor based on macro-tokens

    Article • IMA Journal of Mathematical Control and Information, October 2013, Oxford University Press (OUP)

    Professor Abdulrahman M Al- Ahmari

  28. Investigation of Micro-EDM Input Parameters on Various Outputs in Machining Ni-Ti Shape Memory Alloy Using Full Factorial Design

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Abdulrahman M Al- Ahmari

  29. Optimization of Process Parameters of Rotary Ultrasonic Machining Based on Taguchis Method

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Professor Abdulrahman M Al- Ahmari

  30. Effect of multi-temperature aging on the characterization of aluminum based castings heat treated using fluidized bed technique

    Article • Metals and Materials International, July 2013, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari

  31. GA Support System to Optimize the Sequence of Multi-level and Multi-tool Operations in CNC Machines

    Article • July 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  32. R-TNCES: A Novel Formalism for Reconfigurable Discrete Event Control Systems

    Article • IEEE Transactions on Systems Man and Cybernetics Systems, July 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  33. Influence of Fluidized Bed Quenching on the Mechanical Properties and Quality Index of T6 Tempered B319.2-Type Aluminum Alloys

    Article • Journal of Materials Engineering and Performance, June 2013, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari

  34. Intelligent fixture planning system for prismatic parts

    Article • June 2013, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  35. Set up planning for automatic generation of inspection plan

    Article • June 2013, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  36. Robustness of deadlock control for a class of Petri nets with unreliable resources

    Article • Information Sciences, June 2013, Elsevier

    Professor Abdulrahman M Al- Ahmari

  37. Methods in Product Design

    Article • May 2013

    Professor Abdulrahman M Al- Ahmari

  38. Confusion Diagnosis and Control of Discrete Event Systems Using Synchronized Petri Nets

    Article • Asian Journal of Control, May 2013, Wiley

    Professor Abdulrahman M Al- Ahmari

  39. Optimal controllability of 3-composed siphons in a class of Petri nets

    Article • Electronics Letters, May 2013, the Institution of Engineering and Technology (the IET)

    Professor Abdulrahman M Al- Ahmari

  40. A Semi-Integration System of CAD and Inspection Planning of Standard Manufactured Features

    Article • May 2013, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  41. Mechanical characterisation and quality index of A356-type aluminium castings heat treated using fluidised bed quenching

    Article • Materials Science and Technology, April 2013, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  42. Assessment of alternative industrial robots using AHP and TOPSIS

    Article • International Journal of Industrial and Systems Engineering, January 2013, Inderscience Publishers

    Professor Abdulrahman M Al- Ahmari

  43. Formal Methods in Manufacturing Systems

    Article • January 2013, IGI Global

    Professor Abdulrahman M Al- Ahmari

  44. An integrated retail space allocation and lot sizing models under vendor managed inventory and consignment stock arrangements

    Article • Computers & Industrial Engineering, January 2013, Elsevier

    Professor Abdulrahman M Al- Ahmari

  45. Assessment and comparison of immersive virtual assembly training system

    Article • International Journal of Rapid Manufacturing, January 2013, Inderscience Publishers

    Professor Abdulrahman M Al- Ahmari

  46. On Nonexistence of a Maximally Permissive Liveness-Enforcing Pure Net Supervisor

    Article • IEEE Transactions on Systems Man and Cybernetics Systems, January 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  47. Multi-sensor Integrated System for Reverse Engineering

    Article • Procedia Engineering, January 2013, Elsevier

    Professor Abdulrahman M Al- Ahmari

  48. Virtual Ergonomic Assessment of First Saudi Arabian Designed Car in a Semi-Immersive Environment

    Article • Procedia Engineering, January 2013, Elsevier

    Professor Abdulrahman M Al- Ahmari

  49. Optimal controllability of 2-composed siphons in a class of Petri nets

    Article • Electronics Letters, November 2012, the Institution of Engineering and Technology (the IET)

    Professor Abdulrahman M Al- Ahmari

  50. Iterative Deadlock Control by Using Petri Nets

    Article • IEEE Transactions on Systems Man and Cybernetics Part C (Applications and Reviews), November 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  51. Development and Evaluation of a Virtual Assembly Trainer

    Article • Proceedings of the Human Factors and Ergonomics Society Annual Meeting, September 2012, SAGE Publications

    Professor Abdulrahman M Al- Ahmari

  52. Preliminary fabrication of thin‐wall structure of Ti6Al4V for dental restoration by electron beam melting

    Article • Rapid Prototyping Journal, April 2012, Emerald

    Professor Abdulrahman M Al- Ahmari

  53. Development and Evaluation of a Virtual Assembly Trainer

    Article • January 2012, American Psychological Association (APA)

    Professor Abdulrahman M Al- Ahmari

  54. A New Genetic Algorithm for Designing Cellular Manufacturing Systems with Labor and Tools Issues

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Professor Abdulrahman M Al- Ahmari

  55. Metallurgical, accuracy and cost analysis of Ti6Al4V dental coping fabricated by electron beam melting process

    Article • September 2011, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  56. Aging behavior of 359-type Al–9%Si–0.5%Mg casting alloys

    Article • Journal of Materials Science, September 2011, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari

  57. Impact toughness and fractography of Al–Si–Cu–Mg base alloys

    Article • Materials & Design (1980-2015), August 2011, Elsevier

    Professor Abdulrahman M Al- Ahmari

  58. Open Problems in Deadlock Control for Flexible Manufacturing Systems by Using Petri Nets

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Abdulrahman M Al- Ahmari

  59. Investigation of the Capacity of Underground Water Pumping Using Wind Energy in Dhahran

    Article • Arabian Journal for Science and Engineering, July 2011, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari

  60. The role of alloying additives and aging treatment on the impact behavior of 319 cast alloy

    Article • Materials & Design (1980-2015), June 2011, Elsevier

    Professor Abdulrahman M Al- Ahmari, Adel mohamed

  61. Rapid prototyping and rapid manufacturing in medicine and dentistry

    Article • Virtual and Physical Prototyping, June 2011, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  62. Reversed fuzzy Petri nets and their application for fault diagnosis

    Article • Computers & Industrial Engineering, May 2011, Elsevier

    Professor Abdulrahman M Al- Ahmari, Zhiwu Li

  63. Evaluation of advance manufacturing technologies using concord and discord indices

    Article • International Journal of Computer Integrated Manufacturing, April 2011, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  64. Metallurgical parameters controlling the microstructure and hardness of Al–Si–Cu–Mg base alloys

    Article • Materials & Design (1980-2015), April 2011, Elsevier

    Professor Abdulrahman M Al- Ahmari

  65. Optimal MRP offsetting for assembly systems with stochastic lead times: POQ policy and service level constraint

    Article • Journal of Intelligent Manufacturing, March 2011, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari, Alexandre Dolgui

  66. Influence of fluidized sand bed heat treatment on the performance of Al–Si cast alloys

    Article • Materials & Design (1980-2015), March 2011, Elsevier

    Professor Abdulrahman M Al- Ahmari

  67. Application of neural network technique to planetary milling process for the production of ZnO nanopowders

    Article • January 2011, American Institute of Physics

    Professor Abdulrahman M Al- Ahmari

  68. Design of cellular manufacturing systems with labor and tools consideration

    Article • July 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdulrahman M Al- Ahmari

  69. A methodology for selection and evaluation of advanced manufacturing technologies

    Article • International Journal of Computer Integrated Manufacturing, October 2008, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  70. A joint optimisation model for inventory replenishment, product assortment, shelf space and display area allocation decisions

    Article • European Journal of Operational Research, August 2007, Elsevier

    Professor Abdulrahman M Al- Ahmari

  71. Predictive machinability models for a selected hard material in turning operations

    Article • Journal of Materials Processing Technology, July 2007, Elsevier

    Professor Abdulrahman M Al- Ahmari

  72. Evaluation of CIM technologies in Saudi industries using AHP

    Article • The International Journal of Advanced Manufacturing Technology, May 2006, Springer Science + Business Media

    Professor Abdulrahman M Al- Ahmari

  73. Simultaneous determination of the optimal process mean and cutting speed for a manufacturing process

    Article • Production Planning & Control, April 2004, Taylor & Francis

    Professor Abdulrahman M Al- Ahmari

  74. Part feature selection and family design in group technology using a fuzzy approach

    Article • International Journal of Computer Applications in Technology, January 2004, Inderscience Publishers

    Professor Abdulrahman M Al- Ahmari

  75. A fuzzy analysis approach for part‐machine grouping in cellular manufacturing systems

    Article • Integrated Manufacturing Systems, November 2002, Emerald

    Professor Abdulrahman M Al- Ahmari

  76. Integration of CAD and a cutting tool selection system

    Article • Computers & Industrial Engineering, April 2002, Elsevier

    Professor Abdulrahman M Al- Ahmari

  77. Implementing CIM systems in SMEs

    Article • International Journal of Computer Applications in Technology, January 2002, Inderscience Publishers

    Professor Abdulrahman M Al- Ahmari

  78. An integrated modelling method to support manufacturing systems analysis and design

    Article • Computers in Industry, April 1999, Elsevier

    Professor Abdulrahman M Al- Ahmari