All Stories

  1. Seismic Performance of 2D Regular Reinforced Concrete Frame Buildings Strengthened by Using Shape Memory Alloys

    Article • International Journal of Engineering Research in Africa, December 2024, Trans Tech Publications

    Professor Abdellatif Khamlichi

  2. Pseudo-static analytical formulation for seismic thrust on cantilever retaining walls in C-Φ soils considering double failure planes

    Article • Journal of Engineering and Applied Science, December 2024, Springer Science + Business Media

    Professor Abdellatif Khamlichi

  3. Design and optimization of two-terminal InGaP/Si tandem solar cell through numerical simulation

    Article • Physica Scripta, November 2024, Institute of Physics Publishing

    Professor Abdellatif Khamlichi

  4. Combined effect of track-bridge interaction on the dynamic response of a simply supported railway bridge

    Article • Structures, October 2024, Elsevier

    Professor Abdellatif Khamlichi

  5. A Hybrid Dynamic Nonlinear Controller for Variable Speed Wind Turbine in Low Wind Velocity Regime

    Article • Advances in Electrical and Electronic Engineering, June 2024, VSB - Technical University of Ostrava

    Professor Abdellatif Khamlichi

  6. Numerical Investigation of Seismic Behaviour for a Flexible Cantilever Retaining Wall with Cohesive Backfill

    Article • International Journal of Engineering Research in Africa, May 2024, Trans Tech Publications

    Professor Abdellatif Khamlichi

  7. Numerical modelling of bridge deck reinforcement corrosion based on analysis of GPR data

    Article • International Review of Applied Sciences and Engineering, January 2024, Akademiai Kiado

    Professor Abdellatif Khamlichi

  8. Modeling and design of a photovoltaic‐fed single‐ended primary‐inductor converter for maximum power point tracking with current mode control

    Article • International Journal of Circuit Theory and Applications, December 2023, Wiley

    Professor Abdellatif Khamlichi

  9. Improving structural health monitoring with impact zone localization using heuristic algorithms

    Article • Pollack Periodica, September 2023, Akademiai Kiado

    Professor Abdellatif Khamlichi

  10. Design and optimisation of two-terminal InGaP/Si tandem solar cell through numerical simulation

    Article • September 2023, Research Square

    Professor Abdellatif Khamlichi

  11. Mathematical modeling of the combined action of Origanum grosii essential oil and sodium chloride on the growth of methicillin-resistant Staphylococcus aureus

    Article • South African Journal of Botany, September 2023, Elsevier

    Professor Abdellatif Khamlichi

  12. An Evaluation of Inflow Profiles for CFD Modeling of Neutral ABL and Turbulent Airflow over a Hill Model

    Article • Journal of Applied Fluid Mechanics, August 2023, Academic World Research

    Professor Abdellatif Khamlichi

  13. Numerical modelling of reinforced concrete gravity retaining walls under seismic loads

    Article • IOP Conference Series Earth and Environmental Science, June 2023, Institute of Physics Publishing

    Professor Abdellatif Khamlichi

  14. Simulation aided design of a high efficient GaSb based single-junction solar cell

    Article • International Review of Applied Sciences and Engineering, May 2023, Akademiai Kiado

    Professor Abdellatif Khamlichi

  15. Identification based on a finite element model of an impact force occurring on a composite structure

    Article • International Journal of Applied Mechanics and Engineering, March 2023, Uniwersytet Zielonogórski

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  16. Mathematical modeling of Escherichia coli O157:H7 growth in carrot juice influenced by Thymbra capitata essential oil, heat treatment, and storage temperature

    Article • International Journal of Food Microbiology, February 2023, Elsevier

    Professor Abdellatif Khamlichi

  17. Optimizing efficiency of InGaP/GaAs dual-junction solar cells with double tunnel junction and bottom back surface field layers

    Article • Optik, February 2023, Elsevier

    Professor Abdellatif Khamlichi

  18. Identification of distributed impact force using the finite element model based on regularization method

    Article • Research on Engineering Structures and Materials, January 2023, MIM Research Group

    Professor Abdellatif Khamlichi

  19. Numerical and Analytical Studies of Low Cycle Fatigue Behavior of 316 LN Austenitic Stainless Steel

    Article • Journal of Pressure Vessel Technology, September 2022, ASME International

    Professor Abdellatif Khamlichi

  20. CFD modeling of the turbulent airflow over open hilly terrain: Effect of inhomogeneous ABL in neutral conditions

    Article • September 2022, Research Square

    Professor Abdellatif Khamlichi

  21. Delamination buckling of a laminated composite shell panel using cohesive zone modelling

    Article • International Review of Applied Sciences and Engineering, June 2022, Akademiai Kiado

    Professor Abdellatif Khamlichi

  22. Force-displacement relationships for NiTi alloy helical springs by using ANSYS: Superelasticity and shape memory effect

    Article • International Review of Applied Sciences and Engineering, March 2022, Akademiai Kiado

    Professor Abdellatif Khamlichi

  23. Nonlinear control of wind turbine in above rated wind speed region

    Article • Pollack Periodica, March 2022, Akademiai Kiado

    Professor Abdellatif Khamlichi

  24. Partial Differential Equations of Motion for a Single-Link Flexible Manipulator

    Article • March 2022, MDPI AG

    Professor Abdellatif Khamlichi

  25. Nonlinear analysis of the ballast influence on the train-bridge resonance of a simply supported railway bridge

    Article • Structures, January 2022, Elsevier

    Professor Abdellatif Khamlichi

  26. Modeling and design of voltage-mode controlled PV-fed SEPIC converter

    Article • IFAC-PapersOnLine, January 2022, Elsevier

    Professor Abdellatif Khamlichi

  27. A Numerical Analysis on the Cyclic Behavior of 316 FR Stainless Steel and Fatigue Life Prediction

    Article • Engineering Proceedings, October 2021, MDPI AG

    Professor Abdellatif Khamlichi

  28. Low cycle fatigue behavior of circumferentially notched specimens made of modified 9Cr–1Mo steel at elevated temperature

    Article • International Review of Applied Sciences and Engineering, October 2021, Akademiai Kiado

    Professor Abdellatif Khamlichi

  29. A Study on Low Cycle Fatigue Life Assessment of Notched Specimens Made of 316 LN Austenitic Stainless Steel

    Article • Journal of Pressure Vessel Technology, August 2021, ASME International

    Professor Abdellatif Khamlichi

  30. Ground Penetrating Radar Data Acquisition to Detect Imbalances and Underground Pipes

    Article • July 2021, Springer Science + Business Media

    Professor Abdellatif Khamlichi

  31. Assessment of RANS turbulence closure models for predicting airflow in neutral ABL over hilly terrain

    Article • International Review of Applied Sciences and Engineering, July 2021, Akademiai Kiado

    Professor Abdellatif Khamlichi

  32. Contribution of analysis and detection the risks appearing in roads using GPR method: A case study in Morocco

    Article • Ain Shams Engineering Journal, June 2021, Elsevier

    Professor Abdellatif Khamlichi

  33. Inspection of transverse flaws for railways using phased array ultrasonic technique

    Article • International Review of Applied Sciences and Engineering, March 2021, Akademiai Kiado

    Professor Abdellatif Khamlichi

  34. Numerical and Analytical Analysis of the Low Cycle Fatigue Behavior of Notched and Un-Notched 316 L (N) Austenitic Stainless-Steel Samples at Ambient and Elevated Temperatures

    Article • Materials Proceedings, February 2021, MDPI AG

    Professor Abdellatif Khamlichi

  35. Optimizing linear phased array transducers for non-destructive evaluation of thin layers

    Article • International Review of Applied Sciences and Engineering, August 2020, Akademiai Kiado

    Professor Abdellatif Khamlichi

  36. Application of viscoelastic dampers for reducing dynamic response of high-speed railway bridges

    Article • International Review of Applied Sciences and Engineering, August 2020, Akademiai Kiado

    Professor Abdellatif Khamlichi

  37. Comparative study of five different methods of adjustment by the Weibull model to determine the most accurate method of analyzing annual variations of wind energy in Tetouan - Morocco.

    Article • Procedia Manufacturing, January 2020, Elsevier

    Professor Abdellatif Khamlichi

  38. Modeling of the atmospheric boundary layer under stability stratification for wind turbine wake production

    Article • Wind Engineering, October 2019, SAGE Publications

    Mohamed Marouan ICHENIAL, Professor Abdellatif Khamlichi

  39. Analysis and Modeling of GPR Signals to Detect Cavities: Case Studies in Morocco

    Article • Journal of Electromagnetic Engineering and Science, July 2019, Korean Institute of Electromagnetic Engineering and Science

    Professor Abdellatif Khamlichi

  40. Reliability analysis of slope stability in earthen dams following rapid drawdown

    Article • International Review of Applied Sciences and Engineering, June 2019, Akademiai Kiado

    Professor Abdellatif Khamlichi

  41. Vibration suppression for high speed railway bridges using fluid viscous dampers

    Article • MATEC Web of Conferences, January 2019, EDP Sciences

    Professor Abdellatif Khamlichi

  42. Resistance to buckling of a stiffened panel under axial compression; Effect of imperfections resulting from welding process

    Article • Procedia Manufacturing, January 2019, Elsevier

    Professor Abdellatif Khamlichi

  43. Bayesian sparse regularization for multiple force identification and location in time domain

    Article • Inverse Problems in Science and Engineering, August 2018, Taylor & Francis

    Professor Abdellatif Khamlichi, Samagassi Souleymane

  44. Large Eddy Simulation of turbulent natural convection in an inclined tall cavity

    Article • Numerical Heat Transfer Part A Applications, August 2018, Taylor & Francis

    Professor Abdellatif Khamlichi

  45. Maximum Power Point Tracking in Photovoltaics: Overview and Application

    Article • April 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Abdellatif Khamlichi

  46. Estimation of the duration life in thermomechanical fatigue using finite element post- processing

    Article • IOP Conference Series Materials Science and Engineering, March 2018, Institute of Physics Publishing

    Professor Abdellatif Khamlichi

  47. Dynamic buckling of laminated composite stringer stiffened CFRP panels under axial compression

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  48. Optimizing the focal laws of ultrasonic arrays for non-destructive evaluation of composite panels with delamination

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  49. Damage detection of cracks in carbon fibre reinforced composites by pulsed eddy-current testing

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  50. Bridge deck condition assessment by using GPR: a review

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  51. Reliability of rail transverse flaw detection by means of an embedded ultrasonic based device

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  52. Jacketing of existing reinforced concrete structures with composites in view of seismic rehabilitation

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  53. Effects of plies orientations and initial geometric imperfections on buckling strength of a composite stiffened panel

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  54. Detection of rebar corrosion in bridge deck by using GPR

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  55. Sensitivity of the inverse problem solution related to detection of rebars buried in concrete by using GPR scanning

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  56. Robustness of ultrasonic detection of flaws by using synthetic aperture focusing technique

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Professor Abdellatif Khamlichi

  57. Detecting and localizing moving targets using multistatic radar system

    Article • Procedia Manufacturing, January 2018, Elsevier

    Professor Abdellatif Khamlichi

  58. Damage detection of surface cracks in metallic parts by pulsed Eddy-Current probe

    Article • Procedia Manufacturing, January 2018, Elsevier

    Professor Abdellatif Khamlichi

  59. Humidity and Thermo-Mechanical Cycling Effects on Defects inHot metal forming processes

    Article • Materials Today Proceedings, January 2018, Elsevier

    Professor Abdellatif Khamlichi

  60. Effect of thermal and mechanical parameter’s damage numerical simulation cycling effects on defects in hot metal forming processes

    Article • IOP Conference Series Materials Science and Engineering, October 2017, Institute of Physics Publishing

    Professor Abdellatif Khamlichi

  61. Determination of concrete rebars characteristics by enhanced post-processing of GPR scan raw data

    Article • NDT & E International, July 2017, Elsevier

    Professor Abdellatif Khamlichi

  62. Analyzing wind speed data and wind power density of Tetouan city in Morocco by adjustment to Weibull and Rayleigh distribution functions

    Article • Wind Engineering, May 2017, SAGE Publications

    Mohamed hatim OUAHABI, Professor Abdellatif Khamlichi

  63. Identification Damage Model for Thermomechanical Degradation of Ductile Heterogeneous Materials

    Article • January 2017, De Gruyter

    Professor Abdellatif Khamlichi, Abdelouahid El Amri

  64. Finite Element Simulation of Complex Thermomechanical Fatigue Evolution

    Article • Materials Science Forum, January 2017, Trans Tech Publications

    Professor Abdellatif Khamlichi, Abdelouahid El Amri

  65. Analysis of a RBF Neural Network Based Controller for Pitch Angle of Variable-Speed Wind Turbines

    Article • Procedia Engineering, January 2017, Elsevier

    Professor Abdellatif Khamlichi

  66. Measurement of Dynamic Fracture in Hot Forming Processing : Effect of Steel Elongation and Temperature

    Article • Procedia Structural Integrity, January 2017, Elsevier

    Professor Abdellatif Khamlichi

  67. Analysis of Obstacle and Soil Roughness Effects on the Wind Speed Profile by Using the Finite Element Method

    Article • Procedia Engineering, January 2017, Elsevier

    Professor Abdellatif Khamlichi

  68. Seismic response of foundation-mat structure subjected to local uplift

    Article • Coupled systems mechanics an international journal, December 2016, Techno-Press

    Professor Abdellatif Khamlichi

  69. Computational fluid dynamics analysis of the effect of topographic obstacles on extractable power by horizontal axis wind turbines

    Article • International Review of Applied Sciences and Engineering, December 2016, Akademiai Kiado

    Professor Abdellatif Khamlichi

  70. A hybrid adaptive controller based on sliding mode control and rbf neural network for variable speed wind turbine

    Article • International Review of Applied Sciences and Engineering, December 2016, Akademiai Kiado

    Professor Abdellatif Khamlichi

  71. Thermal-Mechanical Coupled Manufacturing Simulation in Heterogeneous Materials

    Article • Civil Engineering Journal, November 2016, Italian Journal of Science and Engineering

    Professor Abdellatif Khamlichi

  72. Effect of pulse duration and shape on dynamic buckling of stiffened panels

    Article • Pollack Periodica, April 2016, Akademiai Kiado

    Professor Abdellatif Khamlichi, ALI LIMAM

  73. Analysis of the effect of an obstacle on the wind energy potential

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Professor Abdellatif Khamlichi

  74. Solution of inverse localization problem associated to multistatic radar system

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Professor Abdellatif Khamlichi

  75. Analyzing the effect of large rotations on the seismic response of structures subjected to foundation local uplift

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Nadia EL ABBAS, Professor Abdellatif Khamlichi

  76. An adaptive control for a variable speed wind turbine using RBF neural network

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Professor Abdellatif Khamlichi

  77. Effect of atmospheric stability on the estimation of wind power potentiaEffect potential

    Article • MATEC Web of Conferences, January 2016, EDP Sciences

    Professor Abdellatif Khamlichi

  78. Reliability Analysis of Dynamic Buckling Stiffened Panels

    Article • Procedia Technology, January 2016, Elsevier

    Professor Abdellatif Khamlichi

  79. Identification of Beam Cracks by Solution of an Inverse Problem

    Article • Procedia Technology, January 2016, Elsevier

    Professor Abdellatif Khamlichi

  80. Localization of Impact Force Occurring on Elastic Plates by Using a Particle Swarm Algorithm

    Article • Procedia Technology, January 2016, Elsevier

    Professor Abdellatif Khamlichi

  81. Modeling an Eddy-Current Probe for Damage Detection of Surface Cracks in Metallic Parts

    Article • Procedia Technology, January 2016, Elsevier

    Professor Abdellatif Khamlichi

  82. Predictability of Impact Force Localization by Using the Optimization Technique

    Article • Procedia Technology, January 2016, Elsevier

    Professor Abdellatif Khamlichi

  83. Numerical simulation of damage evolution for ductile materials and mechanical properties study

    Article • IOP Conference Series Materials Science and Engineering, December 2015, Institute of Physics Publishing

    Professor Abdellatif Khamlichi, Professor Issam Hanafi

  84. Reliability assessment of buckling strength for imperfect stiffened panels under axial compression

    Article • Canadian Journal of Civil Engineering, December 2015, Canadian Science Publishing

    Professor Abdellatif Khamlichi

  85. The effect of noise on the estimation of rebar radius by inversion of GPR scan data

    Article • International Review of Applied Sciences and Engineering, December 2015, Akademiai Kiado

    Professor Abdellatif Khamlichi

  86. Reconstruction of multiple impact forces by wavelet relevance vector machine approach

    Article • Journal of Sound and Vibration, December 2015, Elsevier

    Professor Abdellatif Khamlichi

  87. Identifying Radius of Rebar Buried in Concrete Massif by Using Electromagnetic Penetrating Radar

    Article • Applied Mechanics and Materials, September 2015, Trans Tech Publications

    Professor Abdellatif Khamlichi

  88. Generating Guided Waves for Detection of Transverse Type-Defects in Rails

    Article • Applied Mechanics and Materials, July 2015, Trans Tech Publications

    Professor Abdellatif Khamlichi

  89. Reliability Analysis of Buckling Limit State for Friction Stir Welded Aircraft Stiffened Panels

    Article • Key Engineering Materials, March 2015, Trans Tech Publications

    Professor Abdellatif Khamlichi, ALI LIMAM

  90. Reliability Analysis in Performance-based Earthquake Engineering

    Article • Procedia Engineering, January 2015, Elsevier

    Professor Abdellatif Khamlichi

  91. Dynamic Buckling of Stiffened Panels

    Article • Procedia Engineering, January 2015, Elsevier

    Professor Abdellatif Khamlichi

  92. Reliability Analysis of Reinforced Concrete Buildings: Comparison between FORM and ISM

    Article • Procedia Engineering, January 2015, Elsevier

    Professor Abdellatif Khamlichi

  93. Detection of delamination in composites by using electromagnetic penetrating radar

    Article • International Review of Applied Sciences and Engineering, December 2014, Akademiai Kiado

    Professor Abdellatif Khamlichi

  94. Modeling an active solar still for sea water desalination process optimization

    Article • Desalination, December 2014, Elsevier

    Professor Abdellatif Khamlichi

  95. Optimizing an Active Solar still for Sea Water Desalination

    Article • Advanced Materials Research, October 2014, Trans Tech Publications

    Professor Abdellatif Khamlichi

  96. Analytical solution of coupled soil erosion and consolidation equations by asymptotic expansion approach

    Article • Applied Mathematical Modelling, August 2014, Elsevier

    Professor Abdellatif Khamlichi

  97. Assessing impact force localization by using a particle swarm optimization algorithm

    Article • Journal of Sound and Vibration, March 2014, Elsevier

    Professor Abdellatif Khamlichi

  98. Evolutionary Computation in Combinatorial of Machining Parameters of Reinforced PEEK Composites Using NSGA-II

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  99. Damage identification in beams by a response surface based technique

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Professor Abdellatif Khamlichi

  100. Detection of Transverse Type-Defects in Rails using Ultrasonic Guided Waves

    Article • International Journal of Railway Technology, January 2014, Civil-Comp, Ltd.

    Professor Abdellatif Khamlichi

  101. Detection of localized damage by eddy currents technique

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Professor Abdellatif Khamlichi

  102. Effect of loading pulse duration on dynamic buckling of stiffened panels

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Professor Abdellatif Khamlichi

  103. Identification of corrosion in reinforcement rebars by using the GPR

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Professor Abdellatif Khamlichi

  104. Influence of measurement noise on the PSO based localization of an impact occurring on elastic plates

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Professor Abdellatif Khamlichi

  105. Reconstruction of impact force on elastic structures by using direct Bayesian approach

    Article • International Review of Applied Sciences and Engineering, December 2013, Akademiai Kiado

    Professor Abdellatif Khamlichi, ALI LIMAM

  106. Assessing buckling strength of stiffened plates as affected by localized initial geometric imperfections

    Article • International Review of Applied Sciences and Engineering, December 2013, Akademiai Kiado

    Professor Abdellatif Khamlichi, ALI LIMAM

  107. Predicción de rugosidad en maquinado de compuestos con base de Peek usando metodología de superficie de respuesta

    Article • Ingeniería Investigación y Tecnología, October 2013, Elsevier

    Professor Abdellatif Khamlichi, Professor Issam Hanafi

  108. Application of Desirability Function Based on Neural Network for Optimizing the Process Parameters in Turning of PEEK CF30 Composites

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  109. Thermomechanical Fatigue Characterization of Three Dimensional Compact Tension Specimens Made from Steel

    Article • Advanced Materials Research, April 2013, Trans Tech Publications

    Professor Abdellatif Khamlichi

  110. Effect of Mesh Size and Mode Truncation on Reconstruction of Force Characteristics for Non Punctual Impacts on Composite Elastic Beams

    Article • Advanced Materials Research, April 2013, Trans Tech Publications

    Professor Abdellatif Khamlichi

  111. Artificial neural networks back propagation algorithm for cutting force components predictions

    Article • Mechanics & Industry, January 2013, EDP Sciences

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  112. Predictability of Inverse Impact Force Location as Affected by Measurement Noise

    Article • ISRN Materials Science, January 2013, Hindawi Publishing Corporation

    Professor Abdellatif Khamlichi

  113. Influence of mesh size and truncation order on reconstruction of impact force on composite elastic beams

    Article • International Review of Applied Sciences and Engineering, December 2012, Akademiai Kiado

    Professor Abdellatif Khamlichi, ALI LIMAM

  114. Mathematical modelling for predicting surface roughness during machining of PEEK CF30 composite

    Article • International Review of Applied Sciences and Engineering, December 2012, Akademiai Kiado

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  115. Predicting liquefaction of tangier soils by using semiempirical approaches and continuum based modelling

    Article • International Review of Applied Sciences and Engineering, December 2012, Akademiai Kiado

    Professor Abdellatif Khamlichi

  116. Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools

    Article • Journal of Cleaner Production, September 2012, Elsevier

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  117. Predicting initial erosion during the hole erosion test by using turbulent flow CFD simulation

    Article • Applied Mathematical Modelling, August 2012, Elsevier

    Professor Abdellatif Khamlichi

  118. Fuzzy rule based predictive model for cutting force in turning of reinforced PEEK composite

    Article • Measurement, July 2012, Elsevier

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  119. Prediction of surface roughness in turning of PEEK cf30 by using an artificial neural network

    Article • Journal of the Chinese Institute of Industrial Engineers, July 2012, Taylor & Francis

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  120. Grey-fuzzy optimisation model for multi performance in CNC turning processes

    Article • International Journal of Computational Systems Engineering, January 2012, Inderscience Publishers

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  121. Modelling of machining force components during turning of PEEK CF30 by TiN coated cutting tools using artificial intelligence

    Article • International Journal of Machining and Machinability of Materials, January 2012, Inderscience Publishers

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  122. Evaluation de la vulnérabilité sismique des constructions en béton armé en vue de leur réhabilitation

    Article • MATEC Web of Conferences, January 2012, EDP Sciences

    Professor Abdellatif Khamlichi

  123. Liquefaction of Tangier soils by using physically based reliability analysis modelling

    Article • MATEC Web of Conferences, January 2012, EDP Sciences

    Professor Abdellatif Khamlichi

  124. Modeling the fluid/soil interface erosion in the Hole Erosion Test

    Article • MATEC Web of Conferences, January 2012, EDP Sciences

    Professor Abdellatif Khamlichi

  125. Reconstruction of distributed force characteristics in case of non punctual objects impacting beams

    Article • MATEC Web of Conferences, January 2012, EDP Sciences

    Professor Abdellatif Khamlichi

  126. Reliability assessment of stress concentration performance state for a perforated composite plate under traction

    Article • MATEC Web of Conferences, January 2012, EDP Sciences

    Professor Abdellatif Khamlichi

  127. Solution of internal erosion equations by asymptotic expansion

    Article • MATEC Web of Conferences, January 2012, EDP Sciences

    Professor Abdellatif Khamlichi

  128. Optimization of cutting parameters in CNC turning operation using Taguchi design of experiments

    Article • International Review of Applied Sciences and Engineering, December 2011, Akademiai Kiado

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  129. Prédiction de la force d'usinage lors du chariotage du polyétheréthercétone (PEEK) CF30 en utilisant la méthode de surface de réponse

    Article • Canadian Aeronautics and Space Journal, August 2011, Canadian Aeronautics and Space Institute

    Professor Abdellatif Khamlichi, Professor Issam Hanafi

  130. Advanced Control of Wind Turbines

    Article • June 2011, IntechOpen

    Professor Abdellatif Khamlichi

  131. Multi-criteria Optimization Using Taguchi and Grey Relational Analysis in CNC Turning of PEEK CF30

    Article • Journal of Thermoplastic Composite Materials, June 2011, SAGE Publications

    Professor Abdellatif Khamlichi, Professor Issam Hanafi

  132. Effect of multiple localized geometric imperfections on stability of thin axisymmetric cylindrical shells under axial compression

    Article • International Journal of Solids and Structures, March 2011, Elsevier

    Professor Abdellatif Khamlichi

  133. Fuzzy Logic-Based Modeling of Surface Roughness Parameters for CNC Turning of PEEK CF30 by TiN-Coated Cutting Tools

    Article • Journal of Thermoplastic Composite Materials, December 2010, SAGE Publications

    Professor Abdellatif Khamlichi, Professor Issam Hanafi

  134. A Simplified Analytical Modeling of the Hole Erosion Test

    Article • American Journal of Engineering and Applied Sciences, April 2010, Science Publications

    Professor Abdellatif Khamlichi

  135. Effect of Cycle Duration and Phasing on Thermomechanical Fatigue of Dog-Bone Specimens Made form Steel

    Article • American Journal of Engineering and Applied Sciences, April 2010, Science Publications

    Professor Abdellatif Khamlichi

  136. Effect of Wall Roughness and Concentration of Clay on Erosion in the Hole Erosion Test

    Article • American Journal of Engineering and Applied Sciences, April 2010, Science Publications

    Professor Abdellatif Khamlichi

  137. Reliability Assessment of Buckling Strength for Compressed Cylindrical Shells with Interacting Localized Geometric Imperfections

    Article • American Journal of Engineering and Applied Sciences, April 2010, Science Publications

    Professor Abdellatif Khamlichi

  138. Sur l’usinabilité des composites à matrices polymères renforcée par des fibres

    Article • Mécanique & Industries, March 2010, EDP Sciences

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  139. Effect of Two Interacting Localized Defects on the Critical Load for Thin Cylindrical Shells Under Axial Compression

    Article • American Journal of Engineering and Applied Sciences, February 2010, Science Publications

    Professor Abdellatif Khamlichi

  140. Multiple Regression Prediction Model for Cutting Forces in Turning Carbon-Reinforced PEEK CF30

    Article • Advances in Materials Science and Engineering, January 2010, Wiley

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  141. Expanded Painting in the Work of Helio Oiticica and Jessica Stockholder

    Article • The International Journal of the Arts in Society Annual Review, January 2009, Common Ground Publishing

    Professor Issam Hanafi, Professor Abdellatif Khamlichi

  142. Vulnérabilité sismique des constructions de type béton armé au Nord du Maroc

    Article • Canadian Journal of Civil Engineering, June 2008, Canadian Science Publishing

    Professor Abdellatif Khamlichi

  143. Experimental characterization of frictional behaviour of clutch facings using Pin-on-disk machine

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor Abdellatif Khamlichi

  144. Buckling of elastic cylindrical shells considering the effect of localized axisymmetric imperfections

    Article • Thin-Walled Structures, July 2004, Elsevier

    Professor Abdellatif Khamlichi

  145. Effet des imperfections géométriques sur la stabilité des coques élastiques cylindriques

    Article • Canadian Journal of Civil Engineering, January 2004, Canadian Science Publishing

    Professor Abdellatif Khamlichi

  146. Optimizing the thermal properties of clutch facings

    Article • Journal of Materials Processing Technology, December 2003, Elsevier

    Professor Abdellatif Khamlichi

  147. Postbuckling of Elastic Beams Considering Higher Order Strain Terms

    Article • Journal of Engineering Mechanics, April 2001, American Society of Civil Engineers (ASCE)

    Professor Abdellatif Khamlichi

  148. Effect of Compressibility on Strain Hardening Beams under Combined Loading

    Article • Journal of Engineering Mechanics, June 1999, American Society of Civil Engineers (ASCE)

    Professor Abdellatif Khamlichi

  149. Elastic-plastic water hammer analysis in piping systems

    Article • Wave Motion, November 1995, Elsevier

    Professor Abdellatif Khamlichi

  150. Assessing the Effect of Two Entering Triangular Initial Geometric Imperfections on the Buckling Strength of an Axisymmetric Shell subjected to Uniform Axial Compression

    Article • Civil-Comp, Ltd.

    Professor Abdellatif Khamlichi

  151. Detection of Defects in Rails by Means of Guided Waves

    Article • Civil-Comp, Ltd.

    Professor Abdellatif Khamlichi

  152. Detection of Localized Damage for Beams using a Frequency Based Method

    Article • Civil-Comp, Ltd.

    Professor Abdellatif Khamlichi

  153. Detection of Localized Damage of Beams using a Frequency Based Method

    Article • Civil-Comp, Ltd.

    Professor Abdellatif Khamlichi

  154. Identifying Impact Location using the Particle Swarm Optimization Algorithm

    Article • Civil-Comp, Ltd.

    Professor Abdellatif Khamlichi

  155. Reconstruction of an Impact Force using a Bayesian Approach

    Article • Civil-Comp, Ltd.

    Professor Abdellatif Khamlichi