All Stories

  1. Punching effect directly on electrical machine stator strips

    Article • International Journal of Applied Electromagnetics and Mechanics, July 2019, IOS Press

    Dr. Hab. Abdelkader Benabou

  2. Development and validation of an electrical and magnetic characterization device for massive parallelepiped specimens

    Article • International Journal of Applied Electromagnetics and Mechanics, July 2019, IOS Press

    Dr. Hab. Abdelkader Benabou

  3. Temperature Dependence in the Jiles–Atherton Model for Non-Oriented Electrical Steels: An Engineering Approach

    Article • IEEE Transactions on Magnetics, November 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  4. Thin grain oriented electrical steel for PWM voltages fed magnetic cores

    Article • AIP Advances, April 2018, American Institute of Physics

    Dr. Hab. Abdelkader Benabou

  5. Computation of Magnetic Forces Using Degenerated Air-Gap Element

    Article • IEEE Transactions on Magnetics, June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  6. Iron Loss Calculation in a Synchronous Generator Using Finite Element Analysis

    Article • IEEE Transactions on Energy Conversion, June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  7. Stray Load Losses Analysis of Cage Induction Motor Using 3-D Finite-Element Method With External Circuit Coupling

    Article • IEEE Transactions on Magnetics, June 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  8. Slinky stator: The impact of manufacturing process on the magnetic properties

    Article • May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  9. Computation of magnetic forces using degenerated airgap element

    Article • November 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  10. Stray load losses analysis of cage induction motor using 3-D finite element method with external circuit coupling

    Article • November 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  11. A study of the effects of temperature on magnetic and copper losses in electrical machines

    Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  12. Dynamic hysteresis modeling including skin effect using diffusion equation model

    Article • Journal of Magnetism and Magnetic Materials, July 2016, Elsevier

    Dr. Hab. Abdelkader Benabou

  13. High-Frequency Behavioral Ring Core Inductor Model

    Article • IEEE Transactions on Power Electronics, May 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou, Professor Nadir IDIR

  14. Finite Element Implementation and Experimental Validation of 2-D/3-D Magnetic Force Formulas

    Article • IEEE Transactions on Magnetics, March 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  15. Characterization of the Local Incremental Permeability of a Ferromagnetic Plate Based on a Four Needles Technique

    Article • IEEE Transactions on Magnetics, January 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  16. Methodology for the analysis of the impact of the forging parameters on metallurgy and mechanical properties in case of solid electromagnetic manufactured parts

    Article • January 2016, American Institute of Physics

    Dr. Hab. Abdelkader Benabou

  17. High frequency model of ferrite and nanocrystalline ring core inductors

    Article • September 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou, Professor Nadir IDIR

  18. Characterization of the local electrical properties of electrical machine parts with non-trivial geometry

    Article • International Journal of Applied Electromagnetics and Mechanics, June 2015, IOS Press

    Dr. Hab. Abdelkader Benabou

  19. End-Region Leakage Fluxes and Losses Analysis of Cage Induction Motors Using 3-D Finite-Element Method

    Article • IEEE Transactions on Magnetics, March 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  20. High frequency current probes for common-mode impedance measurements of power converters under operating conditions

    Article • EPE Journal, December 2014, Taylor & Francis

    Dr. Hab. Abdelkader Benabou

  21. Characterization and Modeling of Hysteresis for Magnetic Materials Used in EMI Filters of Power Converters

    Article • IEEE Transactions on Power Electronics, September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou, Professor Nadir IDIR

  22. Finite-element investigation on zig-zag flux in squirrel cage induction machines

    Article • September 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  23. A Combined Experimental and Finite Element Analysis Method for the Estimation of Eddy-Current Loss in NdFeB Magnets

    Article • Sensors, May 2014, MDPI AG

    Dr. Hab. Abdelkader Benabou

  24. Calculation of Iron Losses in Solid Rotor Induction Machine Using FEM

    Article • IEEE Transactions on Magnetics, February 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  25. Stochastic Jiles-Atherton model accounting for soft magnetic material variability

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, September 2013, Emerald

    Dr. Hab. Abdelkader Benabou

  26. High frequency current probes for common-mode impedance measurements of power converters under operating conditions

    Article • September 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou, Professor Nadir IDIR

  27. Stochastic modeling of anhysteretic magnetic curve using random inter-dependant coefficients

    Article • International Journal of Applied Electromagnetics and Mechanics, August 2013, IOS Press

    Dr. Hab. Abdelkader Benabou

  28. Improved iron loss calculation for non‐centered minor loops

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, July 2013, Emerald

    Dr. Hab. Abdelkader Benabou

  29. Stochastic post‐processing calculation of iron losses – application to a PMSM

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, July 2013, Emerald

    Dr. Hab. Abdelkader Benabou

  30. Analytical modeling to predict the cutting behavior of ferromagnetic steels: A coupled magnetic–mechanical approach

    Article • International Journal of Solids and Structures, June 2013, Elsevier

    Dr. Hab. Abdelkader Benabou

  31. Nonlinear Modeling of Magnetization Loss in Permanent Magnets

    Article • IEEE Transactions on Magnetics, November 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  32. Nonlinear Proper Generalized Decomposition Method Applied to the Magnetic Simulation of a SMC Microstructure

    Article • IEEE Transactions on Magnetics, November 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  33. Stochastic Modeling of Soft Magnetic Properties of Electrical Steels: Application to Stators of Electrical Machines

    Article • IEEE Transactions on Magnetics, October 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  34. Interlaminar short circuit detection: modeling and measurement

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, September 2012, Emerald

    Dr. Hab. Abdelkader Benabou

  35. Measurement method of the complex magnetic permeability of ferrites in high frequency

    Article • May 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou, Professor Nadir IDIR

  36. Experimental Characterization of the Iron Losses Variability in Stators of Electrical Machines

    Article • IEEE Transactions on Magnetics, April 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  37. Adaptive Method for Non-Intrusive Spectral Projection—Application on a Stochastic Eddy Current NDT Problem

    Article • IEEE Transactions on Magnetics, February 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  38. Stochastic Modeling of the Pull-In Voltage in a MEMS Beam Structure

    Article • IEEE Transactions on Magnetics, May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  39. Comparison of pull‐in voltages in MEMS using 3D FEM and analytical approaches

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, November 2010, Emerald

    Dr. Hab. Abdelkader Benabou

  40. Hysteresis Phenomenon Implementation in FIT: Validation With Measurements

    Article • IEEE Transactions on Magnetics, August 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  41. Three-Phase Transformer Modeling Using a Vector Hysteresis Model and Including the Eddy Current and the Anomalous Losses

    Article • IEEE Transactions on Magnetics, August 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  42. Transformer Inrush Currents Taking Into Account Vector Hysteresis

    Article • IEEE Transactions on Magnetics, August 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  43. Iron losses modeling under rotational magnetic flux

    Article • May 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  44. Statistical modeling of an anisotropic lamination stack

    Article • May 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  45. Stochastic modeling of the pull-in voltage in a MEMS beam structure

    Article • May 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  46. Accurate minor loops calculation with a modified Jiles‐Atherton hysteresis model

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, May 2009, Emerald

    Dr. Hab. Abdelkader Benabou

  47. Electromagnetic modelling of short circuited coreplates

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, May 2009, Emerald

    Dr. Hab. Abdelkader Benabou

  48. Finite Element Three-Phase Transformer Modeling Taking Into Account a Vector Hysteresis Model

    Article • IEEE Transactions on Magnetics, March 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  49. Minor loops modelling with a modified Jiles–Atherton model and comparison with the Preisach model

    Article • Journal of Magnetism and Magnetic Materials, October 2008, Elsevier

    Dr. Hab. Abdelkader Benabou

  50. Implementation of an Anisotropic Vector Hysteresis Model in a 3-D Finite-Element Code

    Article • IEEE Transactions on Magnetics, June 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Hab. Abdelkader Benabou

  51. Permanent magnet modelling for dynamic applications

    Article • Journal of Magnetism and Magnetic Materials, March 2008, Elsevier

    Dr. Hab. Abdelkader Benabou

  52. Analysis of a rotational single sheet tester using 3D finite element model taking into account hysteresis effect

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, August 2007, Emerald

    Dr. Hab. Abdelkader Benabou

  53. Inclusion of a stress‐dependent Preisach model in 2D FE calculations

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, January 2006, Emerald

    Dr. Hab. Abdelkader Benabou

  54. Modelling of a hysteresis motor using the Jiles-Atherton model

    Article • The European Physical Journal Applied Physics, December 2004, EDP Sciences

    Dr. Hab. Abdelkader Benabou

  55. Comparison of the Preisach and Jiles‐Atherton models to take hysteresis phenomenon into account in finite element analysis

    Article • COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, September 2004, Emerald

    Dr. Hab. Abdelkader Benabou

  56. Comparison of Preisach and Jiles–Atherton models to take into account hysteresis phenomenon for finite element analysis

    Article • Journal of Magnetism and Magnetic Materials, April 2003, Elsevier

    Dr. Hab. Abdelkader Benabou