All Stories

  1. Integrated multiphysics assessment of grid-to-rod fretting mitigation: enhancing nuclear safety through improved fuel integrity

    Article • Nuclear Engineering and Design, April 2026, Elsevier

    Mohammad Asaduzzaman Chowdhury

  2. Synthesis and morphological characterization of silver nanoparticles reinforced titanium-based nanocomposites for dental applications

    Article • Results in Materials, March 2026, Elsevier

    Mohammad Asaduzzaman Chowdhury

  3. Recent Advances in Biocompatible Dental Materials

    Article • Biomedical Materials & Devices, February 2026, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  4. Development of Titanium‐Based Nanocomposites Incorporating Silver Nanoparticles: A Novel Approach for Antibacterial and Biocompatible Materials in Dental Implants

    Article • ChemistrySelect, February 2026, Wiley

    Mohammad Asaduzzaman Chowdhury

  5. Carbon Nanomaterials - Latest Trends in Synthesis, Properties and Applications

    Article • January 2026, IntechOpen

    Mohammad Asaduzzaman Chowdhury

  6. Gamma irradiation effects on mechanical and environmental performance of Al2O3-TiO2 reinforced jute-glass hybrid composites

    Article • Next Materials, January 2026, Elsevier

    Mohammad Asaduzzaman Chowdhury

  7. Advances in tribological performance of plant–fiber reinforced epoxy composites

    Article • RSC Advances, January 2026, Royal Society of Chemistry

    Mohammad Asaduzzaman Chowdhury

  8. Innovative selection of bio-based materials for developing fire-retardant composites for ceiling solutions

    Article • Materials Research Express, December 2025, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury

  9. Tunable Bandgap and Structural Characterization of Boron‐Doped Graphene Synthesized through Electrochemical Exfoliation

    Article • Advanced Engineering Materials, October 2025, Wiley

    Mohammad Asaduzzaman Chowdhury

  10. Enhancement of moisture and water resistance in peracetic acid-treated jute fibers: Influence of time, temperature, and chemical concentration

    Article • Results in Surfaces and Interfaces, October 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  11. DFT based investigation of Se doped MgMo6S8-ySey as promising cathode materials for Mg-ion battery application

    Article • Scientific Reports, August 2025, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  12. Enhancement of Mechanical, Physiochemical and Water Resistance Properties of TiO2-Coated Jute Fibers: Effects of Gamma Irradiation, Chemical Treatments and Crystallinity

    Article • Fibers and Polymers, July 2025, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  13. Modeling CO2 Adsorption in Nanoporous Materials for Efficient Carbon Capture: A DFT Approach

    Article • July 2025, ASME International

    Mohammad Asaduzzaman Chowdhury

  14. Advancing Stability in Robot Manipulators: A Review of Recent Progress and Parameters

    Article • Engineering Reports, July 2025, Wiley

    Mohammad Asaduzzaman Chowdhury

  15. Advancing Cathode Materials for Rechargeable Magnesium‐Ion Batteries: Sustainable Structures, Ecofriendly Properties, and Enhanced Electrochemical Performance

    Article • Energy Technology, June 2025, Wiley

    Mohammad Asaduzzaman Chowdhury

  16. Advances of Hydroxyapatite Nanoparticles in Dental Implant Applications

    Article • International Dental Journal, June 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  17. Advances of composite materials in automobile applications – A review

    Article • Journal of Engineering Research, June 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  18. A Machine Learning Framework for Discriminating between ChatGPT and Web Search Results

    Article • Statistics Optimization & Information Computing, May 2025, International Academic Press

    Mohammad Asaduzzaman Chowdhury

  19. Enhancement of crystallinity of jute fibers through surface modification and gamma irradiation

    Article • Textile Research Journal, May 2025, SAGE Publications

    Mohammad Asaduzzaman Chowdhury

  20. Advancements in cathode materials for high-performance rechargeable magnesium-ion batteries

    Article • Journal of Energy Storage, May 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  21. Advances in nanoparticles in targeted drug delivery–A review

    Article • Results in Surfaces and Interfaces, May 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  22. Development and characterization of silver, zirconium dioxide, and hydroxyapatite nanoparticles reinforced titanium-based nanocomposites

    Article • Composites and Advanced Materials, May 2025, SAGE Publications

    Mohammad Asaduzzaman Chowdhury

  23. Impact of graphene nanoparticles on DLP-printed parts' mechanical behavior

    Article • Advances in Industrial and Manufacturing Engineering, May 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  24. Algorithm-driven development of a simulation tool for industrial manipulator stability analysis

    Article • International Journal of Reconfigurable and Embedded Systems (IJRES), March 2025, Institute of Advanced Engineering and Science

    Mohammad Asaduzzaman Chowdhury

  25. Fabrication and characterization of corn starch based bioplastic for packaging applications

    Article • Results in Materials, March 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  26. Negative dielectric constant and impedance analysis of novel self-generated Ti3AlC2 and Ti4AlN3 Max phase reinforced boron composites

    Article • Open Ceramics, March 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  27. Synthesis and characterization of novel hybrid composites using nanofiller-nanofibrous coating for industrial applications

    Article • Journal of Engineering Research, March 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  28. Effect of time, temperature and chemical concentration of peracetic acid treatment on enhancement of crystallinity of jute fibers

    Article • Journal of Industrial Textiles, February 2025, SAGE Publications

    Mohammad Asaduzzaman Chowdhury

  29. Advances in spin crossover metal complexes: a comprehensive review on its gas sensing applications

    Article • Reviews in Inorganic Chemistry, February 2025, De Gruyter

    Mohammad Asaduzzaman Chowdhury

  30. Enhancement of Moisture and Water Resistance in Chemically Treated and Gamma Irradiated Jute Fibers

    Article • Fibers and Polymers, January 2025, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  31. Machine learning in advancing anode materials for Lithium-Ion batteries – A review

    Article • Inorganic Chemistry Communications, January 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  32. Self-generated B-MAX phase composites: The effect of sintering temperature on surface morphology and phase composition

    Article • Materials Letters, January 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  33. Synthesis and analysis of borophene through magnesium-activated boron using combined electrochemical exfoliation and sonication techniques

    Article • Next Nanotechnology, January 2025, Elsevier

    Mohammad Asaduzzaman Chowdhury

  34. Tailoring the thermal and thermomechanical characteristics of novel MAX phase boron composites in high-temperature applications

    Article • Nanoscale Advances, January 2025, Royal Society of Chemistry

    Mohammad Asaduzzaman Chowdhury

  35. Exploring semiconductor potential: novel boron-based Ti3AlC2 and Ti4AlN3 MAX phase composites with tunable band gaps

    Article • Nanoscale Advances, January 2025, Royal Society of Chemistry

    Mohammad Asaduzzaman Chowdhury

  36. A holistic approach of stability using material parameters of manipulators

    Article • IAES International Journal of Robotics and Automation (IJRA), December 2024, Institute of Advanced Engineering and Science

    Mohammad Asaduzzaman Chowdhury

  37. Analysis of semiconductor properties of fabricated graphene materials

    Article • Nano-Structures & Nano-Objects, December 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  38. Mathematical model and evaluation of dynamic stability of industrial robot manipulator: Universal robot

    Article • Systems and Soft Computing, December 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  39. Prospects and challenges of anode materials for lithium-ion batteries–A review

    Article • Cleaner Energy Systems, December 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  40. Physical and electrochemical performances of novel tellurium composite films as anode applications in energy storage systems

    Article • Heliyon, October 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  41. Synthesis Morphological and Antimicrobial Characterization of Hydroxyapatite Nanoparticles for Biomedical Applications

    Article • NANO, August 2024, World Scientific Pub Co Pte Lt

    Mohammad Asaduzzaman Chowdhury

  42. Electro-mechanical analysis of nanostructured polymer matrix composite materials for 3D printing using machine learning

    Article • Chemical Engineering Journal Advances, August 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  43. Synthesis and Characterization of Nano-Hydroxyapatite from Hilsha Fish Bone for Biomedical Applications

    Article • NANO, June 2024, World Scientific Pub Co Pte Lt

    Mohammad Asaduzzaman Chowdhury

  44. Advances of MAX phases: Synthesis, characterizations and challenges

    Article • Engineering Reports, June 2024, Wiley

    Mohammad Asaduzzaman Chowdhury

  45. A Medical Cyber-physical system for predicting maternal health in developing countries using machine learning

    Article • Healthcare Analytics, June 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  46. Advances of natural fiber composites in diverse engineering applications—A review

    Article • Applications in Engineering Science, June 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  47. Synthesis and characterization of novel banana-graphene nanofibrous membrane from viscous liquid for bandgap formation

    Article • Chemical Physics Impact, June 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  48. Synthesis and Characterization of Graphene Nanoparticles for Improved Antimicrobial Performance

    Article • NANO, May 2024, World Scientific Pub Co Pte Lt

    Mohammad Asaduzzaman Chowdhury

  49. Surface topography and surface morphology of graphene nanocomposite by FESEM, EDX and AFM analysis

    Article • Nano-Structures & Nano-Objects, May 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  50. Extraction of Nano Hydroxyapatite from Eggshell and Characterization for Biomedical Applications

    Article • Nano LIFE, April 2024, World Scientific Pub Co Pte Lt

    Mohammad Asaduzzaman Chowdhury

  51. Green Synthesis and Characterization of Alocasia indica Assisted Zirconium Dioxide Nanoparticles for Improved Antimicrobial Application

    Article • Nano LIFE, April 2024, World Scientific Pub Co Pte Lt

    Mohammad Asaduzzaman Chowdhury

  52. Progress and prospects of electrospun nanofibrous membranes for water filtration: A comprehensive review

    Article • Desalination, April 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  53. Advances on synthesis and performance of Li-Ion anode batteries-a review

    Article • Chemical Engineering Journal Advances, March 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  54. Bandgap design of fabricated BN/ZnO/Al2O3/TiO2 doped graphene using XPS approach

    Article • Applications in Engineering Science, March 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  55. Experimental characterization of defect-induced Raman spectroscopy in graphene with BN, ZnO, Al2O3, and TiO2 dopants

    Article • Results in Engineering, March 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  56. Green synthesis of novel green ceramic-based nanoparticles prepared by sol-gel technique for diverse industrial application

    Article • Results in Surfaces and Interfaces, February 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  57. Scope of Biological Property Activated Plant Extracted Nanoparticles for Human Immune Response — A Review

    Article • Nano LIFE, January 2024, World Scientific Pub Co Pte Lt

    Mohammad Asaduzzaman Chowdhury

  58. Advancements in MAX phase materials: structure, properties, and novel applications

    Article • RSC Advances, January 2024, Royal Society of Chemistry

    Mohammad Asaduzzaman Chowdhury

  59. Advances and significances of titaniumin dental implant applications

    Article • Results in Chemistry, January 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  60. Creation of a boron carbide-based Ti3AlBC (312) MAX phase: a route to novel MXenes for energy storage

    Article • Chemical Communications, January 2024, Royal Society of Chemistry

    Mohammad Asaduzzaman Chowdhury

  61. Investigation of Mgmo6s8-Ysey as Promising Cathode Materials for Mg-Ion Batteries Via Density Functional Theory

    Article • January 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  62. Multi-physical and anti-corrosion properties of graphene-reinforced epoxy nanocomposite coatings for industrial applications

    Article • Arabian Journal of Chemistry, January 2024, Scientific Scholar

    Mohammad Asaduzzaman Chowdhury

  63. Novel Magnesium-Assisted Electrochemical Exfoliation of Boron Towards High-Quality Borophene

    Article • January 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  64. Recent achievement of graphene in biomedicine: Advancements by integrated microfluidics system and conventional techniques

    Article • Sensors International, January 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  65. Smart bandage: A device for wound monitoring and targeted treatment

    Article • Results in Chemistry, January 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  66. Solid particle erosion behavior of Graphene/SiC/Al2O3/TiO2 coated Kevlar/Epoxy composite materials

    Article • Results in Chemistry, January 2024, Elsevier

    Mohammad Asaduzzaman Chowdhury

  67. Advances of graphene nanoparticles in dental implant applications – A review

    Article • Applied Surface Science Advances, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  68. Bandgap formation in graphene doped with BN, TiO2, Al2O3 and ZnO by sintering process

    Article • Results in Chemistry, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  69. Enhancement of microbial fuel cell performance by introducing dosing materials in waste water to increase microorganism growth

    Article • Renewable Energy, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  70. Enhancement of microbial fuel cell performance using pure magnesium anode

    Article • Energy Reports, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  71. Graphene reinforced 3D printed polymer nanocomposites for diverse applications

    Article • Results in Chemistry, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  72. Performance enhancement of lithium-ion battery using modified LiMn2O4 cathode followed by ultrasonic-assisted electrochemically synthesized graphene

    Article • Results in Engineering, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  73. Recent advances of additive manufacturing in implant fabrication – A review

    Article • Applied Surface Science Advances, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  74. Recent development of dental implant materials, synthesis process, and failure – A review

    Article • Results in Chemistry, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  75. Synthesis and characterization of borophene for future applications

    Article • Results in Chemistry, December 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  76. Advances of lithium-ion batteries anode materials—A review

    Article • Chemical Engineering Journal Advances, November 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  77. Synthesis and characterization of titanium silver composite for dental applications

    Article • Results in Surfaces and Interfaces, October 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  78. Model and Fuzzy Controller Design Approaches for Stability of Modern Robot Manipulators

    Article • Computers, September 2023, MDPI AG

    Mohammad Asaduzzaman Chowdhury

  79. Advances and significances of nanoparticles in semiconductor applications – A review

    Article • Results in Engineering, September 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  80. Emerging 2D borophene: Synthesis, characterization, and sensing applications

    Article • Sensors and Actuators A Physical, September 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  81. MEMS-based energy harvesting devices for low-power applications – a review

    Article • Results in Engineering, September 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  82. Fabrication of PVA/graphene nanofibrous membrane infused with neem extraction for packaging and biomedical applications

    Article • SN Applied Sciences, June 2023, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  83. Green tea and tulsi extracts as efficient green corrosion inhibitor for aluminum alloy in alkaline medium

    Article • Heliyon, June 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  84. Scope of Bio-based nanoparticle targeted through the cancer zone to deactivate cancer affected cells

    Article • Chemical Physics Impact, June 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  85. Synthesis and characterization of Alocasia indica infused silver nanoparticles for dental implant applications

    Article • Chemical Physics Impact, June 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  86. Advances of plant and biomass extracted zirconium nanoparticles in dental implant application

    Article • Heliyon, May 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  87. Carbon Nanotubes - Recent Advances, New Perspectives and Potential Applications

    Article • March 2023, IntechOpen

    Mohammad Asaduzzaman Chowdhury

  88. Development and Characterization of Bioplastic Synthesized from Ginger and Green Tea for Packaging Applications

    Article • Journal of Composites Science, March 2023, MDPI AG

    Prof. Dr. Abdullah M. Asiri, Mohammad Asaduzzaman Chowdhury

  89. Tulsi and green tea extracts as efficient green corrosion inhibitor for the corrosion of aluminum alloy in acidic medium

    Article • Results in Engineering, March 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  90. Development and characterization of natural sourced bioplastic for food packaging applications

    Article • Heliyon, February 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  91. Novel energy bandgap formation of organic solution doped graphene membrane for semiconductor applications

    Article • Applied Surface Science Advances, February 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  92. Surface synthesization of magnesium alloys for improving corrosion resistance and implant applications

    Article • Arabian Journal of Chemistry, February 2023, Scientific Scholar

    Mohammad Asaduzzaman Chowdhury

  93. Evaluation of mechanical properties of SG295 steel at elevated temperatures in LPG cylinder with heat treatment

    Article • January 2023, American Institute of Physics

    Mohammad Asaduzzaman Chowdhury, Mr. Ruhul Amin

  94. Adaptation of Blockchain Technology in the Mobile Banking System in the Context of Bangladesh

    Article • January 2023, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  95. Advances of plant-extracted inhibitors in metal corrosion reduction – Future prospects and challenges

    Article • Results in Chemistry, January 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  96. Analysis of thin film electrochemical deposition process diffused by carbon tool steels

    Article • Results in Chemistry, January 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  97. Development and characterization of eco-friendly starch-based plastic reinforcing tea for packaging applications

    Article • Current Research in Green and Sustainable Chemistry, January 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  98. Green synthesis and characterization of zirconium nanoparticlefor dental implant applications

    Article • Heliyon, January 2023, Elsevier

    Mohammad Asaduzzaman Chowdhury

  99. Advances of nanoparticles employment in dental implant applications

    Article • Applied Surface Science Advances, December 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  100. Synthesis and characterization of plant extracted silver nanoparticles and advances in dental implant applications

    Article • Heliyon, December 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  101. Synthesis and Characterization of Eco-Friendly Bio-Composite from Fenugreek as a Natural Resource

    Article • Polymers, November 2022, MDPI AG

    Mohammad Asaduzzaman Chowdhury

  102. Advances in coatings on Mg alloys and their anti-microbial activity for implant applications

    Article • Arabian Journal of Chemistry, November 2022, Scientific Scholar

    Mohammad Asaduzzaman Chowdhury

  103. A novel temperature dependent method for borophene synthesis

    Article • Applied Surface Science Advances, October 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  104. A review of the tribological behavior of electrodeposited cobalt (Co) based composite coatings

    Article • Composites Part C Open Access, October 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  105. Development and characterization of natural sourced bioplastic synthesized from tamarind seeds, berry seeds and licorice root

    Article • Applied Surface Science Advances, October 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  106. Green synthesis of hybrid nanoparticles for biomedical applications: A review

    Article • Applied Surface Science Advances, October 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  107. Development of SiC–TiO2-Graphene neem extracted antimicrobial nano membrane for enhancement of multiphysical properties and future prospect in dental implant applications

    Article • Heliyon, September 2022, Elsevier

    Professor Md Abdus Shahid, Mohammad Asaduzzaman Chowdhury

  108. Band gap formation of 2D materialin graphene: Future prospect and challenges

    Article • Results in Engineering, September 2022, Elsevier

    Professor Md Abdus Shahid, Mohammad Asaduzzaman Chowdhury

  109. The aspect of the corrosion pitting with fretting fatigue on Aluminum Alloy: A nuclear reactor safety or an aerospace structural failure phenomenon

    Article • Results in Engineering, September 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  110. Enhancement of thermal properties of Kevlar 29 coated by SiC and TiO2 nanoparticles and their binding energy analysis

    Article • Arabian Journal of Chemistry, August 2022, Scientific Scholar

    Mohammad Asaduzzaman Chowdhury

  111. Fabrication and characterization of hybrid coating on Mg–Zn–Ca Mg alloy for enhanced corrosion and degradation resistance as medical implant

    Article • Ceramics International, August 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  112. Electrocatalysis of 2,6-Dinitrophenol Based on Wet-Chemically Synthesized PbO-ZnO Microstructures

    Article • Catalysts, June 2022, MDPI AG

    Prof. Dr. Abdullah M. Asiri, Mohammad Asaduzzaman Chowdhury

  113. Terminalia arjuna leaves extract as green corrosion inhibitor for mild steel in HCl solution

    Article • Results in Engineering, June 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  114. Scope of 2D materials for immune response-a review

    Article • Results in Engineering, June 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  115. Improvement of Mechanical, Thermal, and Physical Behaviors of Jute/Cotton Biocomposites Reinforced by Spent Tea Leaf Particles

    Article • Journal of Composites Science, May 2022, MDPI AG

    Mohammad Asaduzzaman Chowdhury

  116. Water criteria evaluation for drinking and irrigation purposes: a case study in one of the largest rivers of Sundarbans World Heritage region

    Article • Water Science & Technology Water Supply, May 2022, IWA Publishing

    Mohammad Asaduzzaman Chowdhury

  117. Physical, thermal, and mechanical properties of Al 2 O 3 / SiO 2 ...

    Article • Polymer Composites, April 2022, Wiley

    Mohammad Asaduzzaman Chowdhury

  118. Biodegradable, physical and microbial analysis of tamarind seed starch infused eco-friendly bioplastics by different percentage of Arjuna powder

    Article • Results in Engineering, March 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  119. Correlation between experimental and analytic approaches to study the erosion rate of aluminum-metal matrix composites

    Article • Journal of Engineering Research, March 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  120. Erosion characteristics of stainless steels under different percentage of SiC- Al2O3-Fe2O3 solid particles

    Article • Tribology International, March 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  121. Development and analysis of nanoparticle infused plastic products manufactured by machine learning guided 3D printer

    Article • Polymer Testing, February 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  122. Fabrication and characterization of jute/cotton bio-composites reinforced with eggshell particles

    Article • Polymer Bulletin, January 2022, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  123. Modeling Fracture Formation, Behavior and Mechanics of Polymeric Materials: A Biomedical Implant Perspective

    Article • Journal of Composites Science, January 2022, MDPI AG

    Mohammad Asaduzzaman Chowdhury

  124. Conceptual Analysis of Microbial Processes and Drug Delivery System by the Active Ingredients of Nigella sativa

    Article • Biointerface Research in Applied Chemistry, January 2022, AMG Transcend Association

    Professor Md Abdus Shahid, Mohammad Asaduzzaman Chowdhury

  125. Study on the tribological characteristics of plant oil-based bio-lubricant with automotive liner-piston ring materials

    Article • Current Research in Green and Sustainable Chemistry, January 2022, Elsevier

    Dr. I. M. R. Fattah, Mohammad Asaduzzaman Chowdhury

  126. Antibacterial multicomponent electrospun nanofibrous mat through the synergistic effect of biopolymers

    Article • Journal of Applied Biomaterials & Functional Materials, January 2022, SAGE Publications

    Professor Md Abdus Shahid, Mohammad Asaduzzaman Chowdhury

  127. Corrosion behavior of aluminum alloy in NaOH and Syzygium Samarangense solution for environmental sustainability

    Article • Current Research in Green and Sustainable Chemistry, January 2022, Elsevier

    Mohammad Asaduzzaman Chowdhury

  128. Recent machine learning guided material research - A review

    Article • Computational Condensed Matter, December 2021, Elsevier

    Mohammad Asaduzzaman Chowdhury

  129. Synthesis of emerging two-dimensional (2D) materials – Advances, challenges and prospects

    Article • FlatChem, November 2021, Elsevier

    Professor Md Abdus Shahid, Mohammad Asaduzzaman Chowdhury

  130. Improvement of interfacial adhesion performance of the kevlar fiber mat by depositing SiC/TiO2/Al2O3/graphene nanoparticles

    Article • Arabian Journal of Chemistry, November 2021, Scientific Scholar

    Mohammad Asaduzzaman Chowdhury

  131. Effects of Self-Lubricant Coating and Motion on Reduction of Friction and Wear of Mild Steel and Data Analysis from Machine Learning Approach

    Article • Materials, September 2021, MDPI AG

    Mohammad Asaduzzaman Chowdhury

  132. Friction and wear characteristics of ceramics composite under multidirectional motions

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, September 2021, SAGE Publications

    Mohammad Asaduzzaman Chowdhury

  133. Improvement of corrosion resistance of galvanization/nickel/chrome plating low carbon steels in H 2 SO 4 under dynamic condition

    Article • Surface Topography Metrology and Properties, August 2021, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury

  134. Surface coatings analysis and their effects on reduction of tribological properties of coated aluminum under motion with ML approach

    Article • Materials Research Express, August 2021, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury

  135. A Study on the Corrosion Characteristics of Internal Combustion Engine Materials in Second-Generation Jatropha Curcas Biodiesel

    Article • Energies, July 2021, MDPI AG

    Mohammad Asaduzzaman Chowdhury

  136. 3D-Printed Objects for Multipurpose Applications

    Article • Journal of Materials Engineering and Performance, March 2021, Springer Science + Business Media

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  137. Development of antibacterial nanofibrous wound dressing and conceptual reaction mechanism to deactivate the viral protein by Nigella sativa extract

    Article • Advances in Traditional Medicine, January 2021, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury, Professor Md Abdus Shahid

  138. Prospect of biobased antiviral face mask to limit the coronavirus outbreak

    Article • Environmental Research, January 2021, Elsevier

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury, Professor Md Abdus Shahid

  139. Internet of Things (IoT) Based ECG System for Rural Health Care

    Article • International Journal of Advanced Computer Science and Applications, January 2021, The Science and Information Organization

    Mohammad Asaduzzaman Chowdhury

  140. Paederia Foetida leaves extract as a green corrosion inhibitor for mild steel in hydrochloric acid solution

    Article • Current Research in Green and Sustainable Chemistry, January 2021, Elsevier

    Mohammad Asaduzzaman Chowdhury

  141. Scope of eco-friendly nanoparticles for anti-microbial activity

    Article • Current Research in Green and Sustainable Chemistry, January 2021, Elsevier

    Mohammad Asaduzzaman Chowdhury

  142. A Multivariate Time Series Approach for Forecasting of Electricity Demand in Bangladesh Using ARIMAX Model

    Article • December 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  143. Development and Characterization of Kevlar-Reinforced Ceramic Composite Materials

    Article • Journal of Testing and Evaluation, December 2020, ASTM International

    Imran Hossain , Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  144. Characterization of epoxy composites reinforced with CaCO3-Al2O3-MgO-TiO2/CuO filler materials

    Article • Alexandria Engineering Journal, December 2020, Elsevier

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  145. Immune response in COVID-19: A review

    Article • Journal of Infection and Public Health, November 2020, Elsevier

    Mohammad Asaduzzaman Chowdhury, Professor Md Abdus Shahid

  146. Multiphysical analysis of nanoparticles and their effects on plants

    Article • Biotechnology and Applied Biochemistry, October 2020, Wiley

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury

  147. Stature Estimation Using Ulnar Length and Shoulder Elbow Length in a Bangladeshi Population

    Article • SN Comprehensive Clinical Medicine, October 2020, Springer Science + Business Media

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  148. Relationship between Weather Variables and New Daily COVID-19 Cases in Dhaka, Bangladesh

    Article • Sustainability, October 2020, MDPI AG

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury, Dr. I. M. R. Fattah

  149. Effect of nanocatalysts on the transesterification reaction of first, second and third generation biodiesel sources- A mini-review

    Article • Chemosphere, October 2020, Elsevier

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury, Dr. I. M. R. Fattah

  150. An overview of green corrosion inhibitors for sustainable and environment friendly industrial development

    Article • Journal of Adhesion Science and Technology, September 2020, Taylor & Francis

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  151. Effects of Nanoparticles on Viral Infection — A Review

    Article • NANO, September 2020, World Scientific Pub Co Pte Lt

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury, Professor Md Abdus Shahid

  152. Evaluation of the Effect of Environmental Parameters on the Spread of COVID-19: A Fuzzy Logic Approach

    Article • Advances in Fuzzy Systems, September 2020, Hindawi Publishing Corporation

    Mohammad Asaduzzaman Chowdhury, Professor Md Abdus Shahid

  153. Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles

    Article • Chemical Data Collections, August 2020, Elsevier

    Mohammad Asaduzzaman Chowdhury

  154. Relationship between Climate Variables and New Daily COVID-19 Cases in Dhaka, Bangladesh

    Article • July 2020, MDPI AG

    Mohammad Asaduzzaman Chowdhury, Dr. I. M. R. Fattah

  155. Investigation and Characterization of Gamma Radiation Shielding Capacity of Heavy Minerals-Based Composite Materials

    Article • Journal of Nuclear Engineering and Radiation Science, June 2020, ASME International

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  156. Fretting & friction induced fatigue failure: damage criterion of polytetrafluoroethylene

    Article • Heliyon, June 2020, Elsevier

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  157. Scope of Natural Plant Extract to Deactivate COVID-19

    Article • March 2020, Research Square

    Mohammad Asaduzzaman Chowdhury

  158. Friction coefficient and performance evaluation of plain journal bearing using SAE 5W-30 engine oil

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, February 2020, SAGE Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  159. Tribological study of Al-6063-based metal matrix embedded with SiC–Al2O3–TiO2 particles

    Article • SN Applied Sciences, January 2020, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  160. Thermal analysis of hybrid composites reinforced with Al2O3 and SiO2 filler particles

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury

  161. Effect of size and shape of copper alloys particles on the mechanical and tribological behavior of friction materials

    Article • Mechanics & Industry, January 2020, EDP Sciences

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  162. Investigation of the combined effect of notch and fretting on bending fatigue

    Article • Theoretical and Applied Mechanics, January 2020, National Library of Serbia

    Mohammad Asaduzzaman Chowdhury

  163. Prediction of solar irradiation and performance evaluation of grid connected solar 80KWp PV plant in Bangladesh

    Article • Energy Reports, November 2019, Elsevier

    Mohammad Asaduzzaman Chowdhury

  164. Friction, Lubrication and Wear

    Article • October 2019, IntechOpen

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  165. Effect of Lubricating Oil on Sliding Loss and Power Loss of Nylon Gear

    Article • October 2019, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  166. Influence of Glass Fiber Content on the Flexural Properties of Polyamide 6-Polypropylene Blend Composites

    Article • October 2019, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  167. Investigation on Microstructure and Hardness of Aluminium-Aluminium Oxide Functionally Graded Material

    Article • October 2019, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  168. Water and brine absorption capacity of epoxy based glass fiber composite modified with CaCO3–Al2O3–MgO–TiO2/CuO filler materials

    Article • Materials Research Express, September 2019, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury

  169. On the diversity in design for different bending fretting fatigue mechanism

    Article • SN Applied Sciences, August 2019, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  170. Characterization and performance analysis of composite bioplastics synthesized using titanium dioxide nanoparticles with corn starch

    Article • Heliyon, August 2019, Elsevier

    Mohammad Asaduzzaman Chowdhury

  171. Analysis of Artificial Neural Network for Predicting Erosive Wear of Nylon-12 Polymer

    Article • Materials Performance and Characterization, June 2019, ASTM International

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  172. Analysis and Optimization of Turned Surfaces of AISI 1060 using ANOVA and Regression

    Article • Tribology in Industry, March 2019, Faculty of Engineering, University of Kragujevac

    Mohammad Asaduzzaman Chowdhury

  173. Prediction and Optimization of Erosion Rate of Carbon Fiber–Reinforced Ebonite Using Fuzzy Logic

    Article • Journal of Testing and Evaluation, February 2019, ASTM International

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  174. Failure Mechanism of Polytetrafluoroethylene Under Friction Fatigue

    Article • Journal of Failure Analysis and Prevention, January 2019, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  175. Performance and Characterization of Two-Dimensional Material Graphene Conductivity—A Review

    Article • Materials Performance and Characterization, January 2019, ASTM International

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  176. Experimental investigation of refrigerator compressor piston material

    Article • January 2019, American Institute of Physics

    Professor Mohammad Asaduzzaman Chowdhury, Md.Mohi Uddin, Rajib Nandee, Mohammad Asaduzzaman Chowdhury

  177. Wear mechanisms of different engineering systems under higher solicitations: Overview and case studies

    Article • Engineering Failure Analysis, December 2018, Elsevier

    Prof. Dr. Recai KUS, Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  178. Advanced Surface Engineering Research

    Article • November 2018, IntechOpen

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  179. Deposition behavior and tribological properties of diamond-like carbon coatings on stainless steels via chemical vapor deposition

    Article • International Journal of Minerals Metallurgy and Materials, October 2018, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  180. Investigation of sustainability of lubricated journal bearing under relevant design parameters

    Article • Industrial Lubrication and Tribology, May 2018, Emerald

    Mohammad Asaduzzaman Chowdhury

  181. Experimental investigation on flexure and impact properties of injection molded polypropylene-nylon 6-glass fiber polymer composites

    Article • IOP Conference Series Materials Science and Engineering, April 2018, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury

  182. Study of erosive surface characterization of copper alloys under different test conditions

    Article • Surfaces and Interfaces, December 2017, Elsevier

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  183. Design of an improved QPSK modulation technique in wireless communication systems

    Article • December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Mohammad Asaduzzaman Chowdhury

  184. Estimation of the friction coefficient in turning process of metals through model experiment

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, August 2017, SAGE Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  185. Erosion of Mild Steel for Engineering Design and Applications

    Article • Journal of Bio- and Tribo-Corrosion, June 2017, Springer Science + Business Media

    Mohammad Asaduzzaman Chowdhury

  186. Influences of thermal stability, and lubrication performance of biodegradable oil as an engine oil for improving the efficiency of heavy duty diesel engine

    Article • Fuel, May 2017, Elsevier

    Mohammad Asaduzzaman Chowdhury

  187. Characteristics and damage mechanisms of bending fretting fatigue of materials

    Article • International Journal of Damage Mechanics, February 2017, SAGE Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  188. Effect of loading parameter on fretting fatigue

    Article • January 2017, American Institute of Physics

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  189. Study of erosion characterization of carbon fiber reinforced composite material

    Article • January 2017, American Institute of Physics

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  190. Experimental and characterisation of eroded surfaces of T-glass fibre embedded in polyester matrix

    Article • International Journal of Materials Engineering Innovation, January 2017, Inderscience Publishers

    Mohammad Asaduzzaman Chowdhury

  191. Friction and wear of non-ferrous materials under artificially created vibration for machine design

    Article • International Journal of Materials Engineering Innovation, January 2017, Inderscience Publishers

    Mohammad Asaduzzaman Chowdhury

  192. Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers

    Article • Materials Performance and Characterization, December 2016, ASTM International

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  193. Experimental analysis of aluminum alloy under solid particle erosion process

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, August 2016, SAGE Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  194. The Experimental Characteristics and Evaluation of Nylon-12 in Erosion Process

    Article • Journal of Testing and Evaluation, July 2016, ASTM International

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  195. Effects of Acetylene on Deposition Rate of Stainless Steels Using Thermal Chemical Vapor Deposition

    Article • International Journal of Engineering Research in Africa, April 2016, Trans Tech Publications

    Mohammad Asaduzzaman Chowdhury

  196. Erosive wear characteristics of multi-fiber reinforced polyester under different operating conditions

    Article • IOP Conference Series Materials Science and Engineering, February 2016, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury

  197. Influence of normal loads and sliding velocities on friction properties of engineering plastics sliding against rough counterfaces

    Article • IOP Conference Series Materials Science and Engineering, February 2016, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury

  198. Investigation of thin film deposition on stainless steel 304 substrates under different operating conditions

    Article • IOP Conference Series Materials Science and Engineering, February 2016, Institute of Physics Publishing

    Mohammad Asaduzzaman Chowdhury

  199. Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD

    Article • International Journal of Surface Science and Engineering, January 2016, Inderscience Publishers

    Mohammad Asaduzzaman Chowdhury

  200. Erosion characteristics of Teflon under different operating conditions

    Article • Journal of Polymer Engineering, January 2015, De Gruyter

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  201. Experimental Evaluation of Erosion of Gunmetal under Asymmetrical Shaped Sand Particle

    Article • Advances in Tribology, January 2015, Hindawi Publishing Corporation

    Mohammad Asaduzzaman Chowdhury

  202. Experimental Investigation on Friction Coefficient of Composite Materials Sliding Against SS 201 and SS 301 Counterfaces

    Article • Procedia Engineering, January 2015, Elsevier

    Mohammad Asaduzzaman Chowdhury

  203. Sliding Friction of Steel Combinations

    Article • The Open Mechanical Engineering Journal, October 2014, Bentham Science Publishers

    Mohammad Asaduzzaman Chowdhury

  204. Frictional Characteristics of Steel Materials Sliding against Mild Steel

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  205. Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding against Different Counterface Materials

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  206. Experimental study of friction coefficient and wear rate of turned and ground mild steel surfaces sliding against smooth and rough SS304 counterfaces

    Article • Australian Journal of Mechanical Engineering, January 2014, Taylor & Francis

    Mohammad Asaduzzaman Chowdhury

  207. Friction Coefficient and Wear Rate of Different Materials Sliding Against Stainless Steel

    Article • International Journal of Surface Engineering and Interdisciplinary Materials Science, January 2013, IGI Global

    Mohammad Asaduzzaman Chowdhury

  208. Friction Coefficient of Polymer and Composite Materials Sliding against Stainless Steel

    Article • Advanced Materials Research, October 2012, Trans Tech Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  209. Deposition on SS 316 at Different Gas Flow Rates Using Thermal CVD

    Article • Advanced Materials Research, October 2012, Trans Tech Publications

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  210. Friction and Wear of Polymer and Composites

    Article • August 2012, IntechOpen

    Mohammad Asaduzzaman Chowdhury

  211. Influence of Sound Vibration on Diamond-Like Carbon Deposition Rate

    Article • ISRN Mechanical Engineering, May 2012, Hindawi Publishing Corporation

    Mohammad Asaduzzaman Chowdhury

  212. Friction coefficient and wear rate of polymer and composite materials at different sliding speeds

    Article • International Journal of Surface Science and Engineering, January 2012, Inderscience Publishers

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  213. The Effect of Gas Flow Rate on the Thin Film Deposition Rate on Carbon Steel Using Thermal CVD

    Article • International Journal of Chemical Reactor Engineering, December 2011, De Gruyter

    Mohammad Asaduzzaman Chowdhury

  214. Variation of thin film deposition rate on SS 314 with the variation of gas flow rate using CVD

    Article • Industrial Lubrication and Tribology, September 2011, Emerald

    Mohammad Asaduzzaman Chowdhury

  215. Effect of duration of rubbing and normal load on friction coefficient for polymer and composite materials

    Article • Industrial Lubrication and Tribology, August 2011, Emerald

    Mohammad Asaduzzaman Chowdhury

  216. Influence of external horizontal vibration on the coefficient of friction of aluminium sliding against stainless steel

    Article • Industrial Lubrication and Tribology, May 2011, Emerald

    Mohammad Asaduzzaman Chowdhury

  217. Friction and Wear of Diamond Like Carbon (DLC) Coatings -A Review

    Article • Recent Patents on Mechanical Engineering, March 2011, Bentham Science Publishers

    Mohammad Asaduzzaman Chowdhury

  218. The effect of natural frequency of the experimental set‐up on the wear rate

    Article • Industrial Lubrication and Tribology, September 2010, Emerald

    Mohammad Asaduzzaman Chowdhury

  219. The effect of natural frequency of the experimental set‐up on the friction coefficient

    Article • Industrial Lubrication and Tribology, March 2010, Emerald

    Mohammad Asaduzzaman Chowdhury

  220. Erosive Wear Behavior of Composite and Polymer Materials - A Review

    Article • Recent Patents on Mechanical Engineering, January 2010, Bentham Science Publishers

    Mohammad Asaduzzaman Chowdhury

  221. Rolling Contact Fatigue Life of Thermally Sprayed WC Cermet Coatings - A Review

    Article • Recent Patents on Mechanical Engineering, January 2010, Bentham Science Publishers

    Mohammad Asaduzzaman Chowdhury

  222. The wear behavior of mild steel under vertical vibration

    Article • Industrial Lubrication and Tribology, September 2009, Emerald

    Mohammad Asaduzzaman Chowdhury

  223. The influence of natural frequency of the experimental set-up on the friction coefficient of copper

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, September 2009, SAGE Publications

    Mohammad Asaduzzaman Chowdhury

  224. The frictional behavior of composite materials under horizontal vibration

    Article • Industrial Lubrication and Tribology, August 2009, Emerald

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  225. The frictional behavior of mild steel under horizontal vibration

    Article • Tribology International, June 2009, Elsevier

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  226. The frictional behavior of materials under vertical vibration

    Article • Industrial Lubrication and Tribology, May 2009, Emerald

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  227. The Effect of Sound on Diamond Hot Filament Chemical Vapor Deposition

    Article • International Journal of Chemical Reactor Engineering, April 2009, De Gruyter

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  228. The Effect of Relative Humidity and Roughness on the Friction Coefficient under Horizontal Vibration

    Article • The Open Mechanical Engineering Journal, November 2008, Bentham Science Publishers

    Mohammad Asaduzzaman Chowdhury

  229. Tribological Behavior of Composite Materials - A Review

    Article • Recent Patents on Mechanical Engineering, June 2008, Bentham Science Publishers

    Mohammad Asaduzzaman Chowdhury

  230. The effect of amplitude of vibration on the coefficient of friction for different materials

    Article • Tribology International, April 2008, Elsevier

    Mohammad Asaduzzaman Chowdhury

  231. The effect of frequency of vibration and humidity on the wear rate

    Article • Wear, January 2007, Elsevier

    Professor Mohammad Asaduzzaman Chowdhury, Mohammad Asaduzzaman Chowdhury

  232. The effect of frequency of vibration and humidity on the coefficient of friction

    Article • Tribology International, September 2006, Elsevier

    Mohammad Asaduzzaman Chowdhury