All Stories

  1. Influence of SMAW and GMAW on mechanical, microstructural, and corrosion properties of high-carbon steel

    Article • Next Research, December 2025, Elsevier

    Dr Adekunle A Adeleke

  2. Adsorptive removal of phenanthrene and naphthalene from wastewater using coal derived carbon nanoparticles with kinetic and thermodynamic evaluation

    Article • Scientific Reports, November 2025, Springer Science + Business Media

    Dr Adekunle A Adeleke

  3. Multi–criteria decision analysis (MCDA) of medium carbon steel quenched in different media

    Article • Canadian Metallurgical Quarterly, October 2025, Taylor & Francis

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  4. CFD modelling of the effect of mechanical ventilation on hydrogen leak and dispersion in a partially enclosed space

    Article • Nigerian Journal of Technology, September 2025, African Journals Online (AJOL)

    Dr Adekunle A Adeleke

  5. Advancements in hydrometallurgical processes for rare earth elements recovery from coal ash

    Article • International Journal of Coal Preparation and Utilization, September 2025, Taylor & Francis

    Dr Adekunle A Adeleke

  6. Energy Security for Sustainable Development of Oil and Gas Sector in Nigeria

    Article • August 2025, Society of Petroleum Engineers (SPE)

    Dr Adekunle A Adeleke

  7. Evaluating the Impact of Sustainable Management Practices on the Operational Efficiency of Oil and Gas Companies in Nigeria

    Article • August 2025, Society of Petroleum Engineers (SPE)

    Dr Adekunle A Adeleke

  8. Rare Metal Enrichment and Thermal Behavior of Maiganga Coal, Nigeria

    Article • International Journal of Heat and Technology, June 2025, International Information and Engineering Technology Association

    Dr Adekunle A Adeleke

  9. Tensile and fracture behaviour of aluminium MMCs with ceramic particles – a review

    Article • Canadian Metallurgical Quarterly, June 2025, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  10. A review on techno-economic assessment of Spirulina for sustainable nutraceutical, medicinal, environmental, and bioenergy applications

    Article • Bioresources and Bioprocessing, June 2025, Springer Science + Business Media

    Dr Adekunle A Adeleke

  11. Performance Evaluation and Optimization of a Palm Kernel Cracker – A Taguchi-Grey Relational Analysis Approach

    Article • Mathematical Modelling and Engineering Problems, April 2025, International Information and Engineering Technology Association

    Dr Adekunle A Adeleke

  12. Carbonized Bamboo Culm-Based Composite Materials: Mechanical and Frictional Performance for Brake Pad Applications

    Article • International Journal of Design & Nature and Ecodynamics, March 2025, International Information and Engineering Technology Association

    Dr Adekunle A Adeleke

  13. Evaluating the Efficacy of Agro-Waste Derived Flux for Enhancing the Weldability of Steel – A Review

    Article • International Journal of Design & Nature and Ecodynamics, February 2025, International Information and Engineering Technology Association

    Dr. Temitayo Samson Ogedengbe, Dr Adekunle A Adeleke

  14. Energy Demand Forecasting for Hybrid Microgrid Systems Using Machine Learning Models

    Article • Proceedings of Engineering and Technology Innovation, February 2025, Taiwan Association of Engineering and Technology Innovation

    Dr Adekunle A Adeleke

  15. Physico-mechanical properties of briquettes produced from woody biomass

    Article • Latin American Applied Research - An international journal, January 2025, EdiUNS - Editorial de la Universidad Nacional del Sur

    Dr Adekunle A Adeleke

  16. Application of Conversion Coatings on Aluminum Matrix Composites for Corrosion Protection

    Article • Portugaliae Electrochimica Acta, January 2025, Portuguese Society of Electrochemistry

    Dr Adekunle A Adeleke

  17. Electrochemical Evaluation of Corrosion Control by Composite Hybrid Vanadate Conversion Coatings on 6061 Al

    Article • Portugaliae Electrochimica Acta, January 2025, Portuguese Society of Electrochemistry

    Dr Adekunle A Adeleke

  18. Characterization and assessment of selected agricultural residues of Nigerian origin for building applications

    Article • Cogent Engineering, December 2024, Taylor & Francis

    Dr Adekunle A Adeleke

  19. Physicomechanical properties of composite plaster of Paris from locally grown sisal fiber and gypsum

    Article • Discover Civil Engineering, December 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  20. Data-Driven Framework for the Techno-Economic Assessment of Sustainable Aviation Fuel from Pyrolysis

    Article • BioEnergy Research, December 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  21. Production of bioplastic films from wild cocoyam (Caladium bicolor) starch

    Article • Results in Engineering, December 2024, Elsevier

    Dr Adekunle A Adeleke

  22. Design of an Optimal Energy Management Strategy for Hybrid Microgrid Systems

    Article • November 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  23. Leveraging Iot For Sustainable Development In Sub-Saharan Africa: Opportunities And Barriers

    Article • November 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  24. Corncob pyrolysis for sustainable bio-oil production; a review of pretreatment, conversion, and improvement techniques

    Article • Biofuels, November 2024, Taylor & Francis

    Dr Adekunle A Adeleke

  25. A Review of the Physical, Optical and Photoluminescence Properties of Rare Earth Ions Doped Glasses

    Article • Trends in Sciences, October 2024, College of Graduate Studies, Walailak University

    Dr Adekunle A Adeleke

  26. Morphological Characterization and Tribological Properties of TiCoNi Alloy Coatings on Ti–6Al–4V Alloy via Laser Deposition

    Article • Journal of Bio- and Tribo-Corrosion, September 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  27. DEVELOPMENT AND ASSESSMENT OF PARTICLE REINFORCED ABRASIVE GRINDING DISCS FROM LOCALLY SOURCED MATERIALS

    Article • Journal of Chemical Technology and Metallurgy, September 2024, University of Chemical Technology and Metallurgy

    Dr Adekunle A Adeleke

  28. Surface Modification and Corrosion Performance of Laser Cladded Co–Ni on Ti–6Al–4 V in 0.5 M H2SO4 Environment

    Article • Journal of Bio- and Tribo-Corrosion, September 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  29. Exploring alternative fuel solutions: lemon grass oil biodiesel blend with dibutyl ether additive for VCR diesel engines - an experimental analysis

    Article • Scientific Reports, August 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  30. Characterization of Bio-oil and Biochar Produced from Co-pyrolysis of Teak Wood Sawdust and Waste Plastic Bottles Using Ablative Pyrolyzer

    Article • Chemistry Africa, August 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  31. Sustainable Innovations in Nanofiber Fabrication

    Article • July 2024, Taylor & Francis

    Dr Adekunle A Adeleke

  32. Sustainable Hybrid-Reinforced Metal Matrix Composites

    Article • July 2024, Taylor & Francis

    Dr Adekunle A Adeleke

  33. Sustainable Production of Sponge Iron through Direct Reduction Process

    Article • July 2024, Taylor & Francis

    Dr Adekunle A Adeleke

  34. Data-driven framework for the techno-economic assessment of sustainable aviation fuel from pyrolysis.

    Article • July 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  35. A comprehensive review on the similarity and disparity of torrefied biomass and coal properties

    Article • Renewable and Sustainable Energy Reviews, July 2024, Elsevier

    Dr Adekunle A Adeleke, Stephen Sunday Emmanuel

  36. Isolation, characterization and response surface method optimization of cellulose from hybridized agricultural wastes

    Article • Scientific Reports, June 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  37. Enhancing biomass Pyrolysis: Predictive insights from process simulation integrated with interpretable Machine learning models

    Article • Fuel, June 2024, Elsevier

    Dr Adekunle A Adeleke

  38. Comparative studies of Machine Learning Models for Predicting Higher Heating Values of Biomass

    Article • Digital Chemical Engineering, June 2024, Elsevier

    Dr Adekunle A Adeleke

  39. Rating of Geometrical Methods of Tank Calibration: F-TOPSIS Approach

    Article • MAPAN, April 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  40. Advancement in Magnesium Metal Matrix Composites: A Mini-Review of Production Techniques, Properties, and Applications

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  41. Sustainable Bio-oil and Biochar Products from Waste Biomass: A Review of Production Techniques and Applications

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  42. A Model-Based Design of an Electric Kettle for Nigerian Households

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  43. Analysis of an Experimental Digital Read-outs Slider Crank Mechanism

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  44. Smart Home Innovations – A Mini Review

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  45. Production and physico-mechanical properties of ternary-made (waste ceramics, waste papers, and sawdust) particleboard

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  46. Design and Development of Wireless Controlled Eight-Legged Walking Robot

    Article • April 2024, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  47. Exploring the Future of Nanomaterials

    Article • March 2024, Taylor & Francis

    Dr. Alaa El Din Mahmoud, Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  48. Biological Hydrogen Production

    Article • March 2024, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  49. A Novel Load Forecast, and Sizing Model of a Hybrid PV-Hydroelectric Microgrid System Using Python

    Article • March 2024, Research Square

    Dr Adekunle A Adeleke

  50. Rice husk silica blended fillers for engine mount application

    Article • Scientific Reports, February 2024, Springer Science + Business Media

    Dr Adekunle A Adeleke

  51. Current Developments on the Application of Hydrogen in Industry: A Review

    Article • Nile Journal of Engineering and Applied Science, January 2024, ScopeMed International Medical Journal Management and Indexing System

    Dr Adekunle A Adeleke

  52. Development and preliminary performance evaluation of a multi-source powered drying oven

    Article • January 2024, American Institute of Physics

    Dr Adekunle A Adeleke

  53. Particleboard from biomass wastes: A review of production techniques, properties, and future trends

    Article • Research on Engineering Structures and Materials, January 2024, MIM Research Group

    Dr Adekunle A Adeleke

  54. PHYSICO-MECHANICAL PROPERTIES OF POLYMER MATRIX COMPOSITE MATERIAL REINFORCED WITH CARBONIZED CASSAVA BACK PEEL AND IRON FILLINGS

    Article • Acta Metallurgica Slovaca, December 2023, SciCell

    Dr Adekunle A Adeleke

  55. Comprehensive Characterization of Some Selected Biomass for Bioenergy Production

    Article • ACS Omega, November 2023, American Chemical Society (ACS)

    Dr Adekunle A Adeleke

  56. Biomethane and propylene glycol synthesis via a novel integrated catalytic transfer hydrogenolysis, carbon capture and biomethanation process

    Article • Chemical Engineering Journal Advances, November 2023, Elsevier

    Dr Adekunle A Adeleke

  57. Development of hydrometallurgical purification process for Nigerian gypsum ore in hydrochloric acid. Part II: Recovery of pure gypsum from leached liquor

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  58. Comparative Study of the REBA and RULA Assessment Tools Efficiency for Workers Tasks

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  59. Overview of Fourier Transform Infrared (FTIR) Spectroscopy for Biomass and BioFuel Characterization

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  60. Physicochemical and Structural Analyses of Biomass for Bioenergy Production

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  61. Compositional Analysis and Characterisation of Non-edible Plant Biomass for Carboxymethyl Cellulose Production

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  62. ASTM Method for Inclusion Analysis of Prepared Green Steel

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  63. Epoxidized Vegetable Oil Based Vitrimers: Future Perspective and Challenges

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  64. Renewable Energy Conversion from Biomass

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  65. The Preparation Techniques and Application of Aluminium Metal Matrix Composites: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  66. Metal Matrix Reinforcements - Fabrication, Applications, and Properties: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  67. Welding Processes and Common Defects: A Comprehensive Overview

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  68. Simulation Technology in Renewable Energy Generation: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  69. Recent Advances in the Synthesis of Biobased Epoxy Polymer: Replacing Bisphenol A with Sustainable Alternatives

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  70. Advent of Artificial Intelligence in Automotive Engineering

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  71. Reinforcement from Biomass Ash for Metal Matrix Development: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  72. Machining and Heat Generation, Pros and Cons: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  73. A Review on Biomass Conversion Process for Bioenergy Production

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  74. Characterisation of Corncob, Sawdust, and Ldpe for Enhanced Bio-Oil Production

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  75. Recent Developments in the Production of Geopolymers from Biomass Ash

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  76. Polymers for Drilling Fluid Formulations: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  77. Advancements in Titanium for Biomedical Applications: A Review of Recent Developments

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  78. Recent Advances in the Application of IoT in Metallurgical Process

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  79. Physico-chemical Characterization of Date Palm Seed as A Reinforcement in Aluminium Matrix Composites

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  80. A Review on Biomass Briquettes as Alternative and Renewable Fuels

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  81. Green Corrosion Inhibition Practices

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  82. Recent Trends in Magnesium Metal Composites: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  83. Synthesis of Nanop Article From Coal: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  84. Rapid and Semi-Quantitative Analyses of Ethanol and Xylene Isomers Using FTIR Spectroscopy

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  85. Characterization of Wheat Husk ASH and Calcined Eggshell as Potential Glass Former

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  86. A Review on Autonomous Delivery Robots

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  87. A Review on Extraction of Rare Earth Elements (REEs) From Coal Using Acid Leaching

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  88. Formed Coke from Coal and Plastic: A Review

    Article • November 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  89. Machine Learning Model for the Evaluation of Biomethane Potential Based on the Biochemical Composition of Biomass

    Article • BioEnergy Research, September 2023, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  90. A review on the use of carboxymethyl cellulose in oil and gas field operations

    Article • Cellulose, September 2023, Springer Science + Business Media

    Dr Adekunle A Adeleke

  91. Assessing absorption-based CO2 capture: Research progress and techno-economic assessment overview

    Article • Carbon Capture Science & Technology, September 2023, Elsevier

    Dr Adekunle A Adeleke

  92. Composite Tiles Produced from Granite Dust and Tree Pruning Using a Sandwiched Method

    Article • Revue des composites et des matériaux avancés, August 2023, International Information and Engineering Technology Association

    Dr Adekunle A Adeleke

  93. Scanning and transmission electron microscopy examinations of composite hybrid chromate and chromate phosphate conversion coatings exposed in hot 100% relative humidity environments

    Article • Hybrid Advances, August 2023, Elsevier

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  94. Effect of densification process parameters on the physico-mechanical properties of composite briquettes of corncob and rice husk

    Article • Materials Today Proceedings, August 2023, Elsevier

    Dr Adekunle A Adeleke

  95. Electrochemical investigation of the corrosion susceptibility of hybrid reinforced Al6063 with SiC and PKSA in 1.0 M sulfuric acid environment

    Article • Engineering Reports, July 2023, Wiley

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  96. Silver–Gold Synthesized Nanoparticle as Corrosion Inhibitor on Mild Steel in 1.0 M HCl Environment

    Article • Chemistry Africa, July 2023, Springer Science + Business Media

    Dr Adekunle A Adeleke

  97. TIG Welding of Ti6Al4V: Effect of Ti6Al4V ELI as Filler Metal

    Article • Archives of Metallurgy and Materials, June 2023, Polish Academy of Sciences Chancellery

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  98. Influence of sawdust ash on the microstructural and physicomechanical properties of stir-cast Al6063/SDA matrix composite

    Article • The International Journal of Advanced Manufacturing Technology, June 2023, Springer Science + Business Media

    Dr Adekunle A Adeleke

  99. Development of Energy Demand and Carbon Emission Dataset for Nile University of Nigeria.

    Article • Data in Brief, June 2023, Elsevier

    Dr Adekunle A Adeleke

  100. Corrosion Control of AISI 1007 Steel Using Hybrid Inhibitors of Plant Extracts

    Article • Chemistry Africa, May 2023, Springer Science + Business Media

    Dr Adekunle A Adeleke

  101. A Review of Failure Analyses in Engineering: Causes, Effects and Possible Solutions

    Article • April 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke, Dr. Temitayo Samson Ogedengbe

  102. Physicomechanical Properties of Al6063 Metal Matrix Composite Reinforceed with Incinerated Waste Cardboard Paper Ash

    Article • April 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  103. Prospects for Nigerian Electricity Production from Renewable Energy

    Article • April 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  104. Development and Performance Evaluation of Bone Crushing Machine

    Article • April 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  105. Tensile property and microstructural characterization of fractured joints of rotary frictional welded similar and dissimilar metals

    Article • April 2023, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Adekunle A Adeleke

  106. ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF STIR CAST Al6063 ALLOY REINFORCED WITH OKABA COAL ASH

    Article • Acta Metallurgica Slovaca, March 2023, SciCell

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI , Dr. Temitayo Samson Ogedengbe

  107. Pathways for the Valorization of Animal and Human Waste to Biofuels, Sustainable Materials, and Value-Added Chemicals

    Article • Environments, March 2023, MDPI AG

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  108. Pathways for the Valorization of Animal and Human Waste to Biofuels, Sustainable Materials and Value-Added Chemicals

    Article • February 2023, MDPI AG

    Dr Adekunle A Adeleke

  109. Prediction of Biogas Yield from Codigestion of Lignocellulosic Biomass Using Adaptive Neuro-Fuzzy Inference System (ANFIS) Model

    Article • Journal of Engineering, February 2023, Hindawi Publishing Corporation

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  110. Recycling Plastic Waste as Composite Reinforcement

    Article • E3S Web of Conferences, January 2023, EDP Sciences

    Dr Adekunle A Adeleke

  111. Synthesis and Characterization of Eggshell-derived Hydroxyapatite for Dental Implant Applications

    Article • E3S Web of Conferences, January 2023, EDP Sciences

    Dr Adekunle A Adeleke

  112. Production and Performance Evaluation of Shea Butter-Based Lubricating Grease

    Article • E3S Web of Conferences, January 2023, EDP Sciences

    Dr Adekunle A Adeleke

  113. Nigerian Biomass for Bioenergy Applications: A Review on the Potential and Challenges

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2023, Computers, Materials and Continua (Tech Science Press)

    Stephen Sunday Emmanuel, Dr Adekunle A Adeleke

  114. Performance improvement of AA6061-T651 friction stir butt-weldment using particulate addition strategy

    Article • Research on Engineering Structures and Materials, January 2023, MIM Research Group

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  115. Valorized rice husk as green corrosion inhibitor for Al 6061 in 1M HCl

    Article • Research on Engineering Structures and Materials, January 2023, MIM Research Group

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  116. Development of Energy Demand and Carbon Emission Dataset for Nile University of Nigeria

    Article • January 2023, Elsevier

    Dr Adekunle A Adeleke

  117. Enhancing Waste Biomass Pyrolysis: Predictive Insights from Process Simulation Integrated with Interpretable Machine Learning Models

    Article • January 2023, Elsevier

    Dr Adekunle A Adeleke

  118. Hybrid Machine Learning Model for the Evaluation of Biomethane Potential Based on the Biochemical Composition of Biomass

    Article • January 2023, Elsevier

    Dr Adekunle A Adeleke

  119. DEVELOPMENT AND ANALYSIS OF FRICTION MATERIAL FOR ECO-FRIENDLY BRAKE PAD USING SEASHELL COMPOSITE

    Article • Scientia Iranica, December 2022, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

    Dr Adekunle A Adeleke

  120. CORROSION BEHAVIOR OF Al/SiC/PKSA HYBRID COMPOSITES IN 1.0 M H2SO4 ENVIRONMENT USING POTENTIODYNAMIC POLARIZATION TECHNIQUE

    Article • Acta Metallurgica Slovaca, December 2022, SciCell

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  121. Electrochemical Studies of the Corrosion Behavior of Al/SiC/PKSA Hybrid Composites in 3.5% NaCl Solution

    Article • Journal of Composites Science, September 2022, MDPI AG

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  122. Understanding casting behaviour of low carbon high manganese steel through detailed characterization of mould powder and mould top slag

    Article • Ironmaking & Steelmaking Processes Products and Applications, August 2022, Taylor & Francis

    Dr Adekunle A Adeleke

  123. Corrosion inhibition performance of silver nanoparticles embedded-gloss paint on carbon steel and aluminium substrates in 2.0 M H2SO4 solution

    Article • Nano Plus Science and Technology of Nanomaterials, July 2022, Nanotechnology Research Group

    Dr Adekunle A Adeleke

  124. Present and Future Impacts of Computer-Aided Design/ Computer-Aided Manufacturing (CAD/CAM)

    Article • Journal Européen des Systèmes Automatisés, June 2022, International Information and Engineering Technology Association

    Dr Adekunle A Adeleke

  125. Effect of biomass co-digestion and application of artificial intelligence in biogas production: A review

    Article • Energy Sources Part A Recovery Utilization and Environmental Effects, June 2022, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  126. Briquetting of subbituminous coal and torrefied biomass using bentonite as inorganic binder

    Article • Scientific Reports, May 2022, Springer Science + Business Media

    Dr Adekunle A Adeleke

  127. A comprehensive review of hydrogen production and storage: A focus on the role of nanomaterials

    Article • International Journal of Hydrogen Energy, May 2022, Elsevier

    Dr Adekunle A Adeleke

  128. Recent Development in Casting Technology: A Pragmatic Review

    Article • Revue des composites et des matériaux avancés, April 2022, International Information and Engineering Technology Association

    Dr Adekunle A Adeleke

  129. PHYSICO-MECHANICAL PROPERTIES ANND MICROSTRUCTURE RESPONSES OF HYBRID REINFORCED Al6063 COMPOSITES TO PKSA/SiC INCLUSION

    Article • Acta Metallurgica Slovaca, March 2022, SciCell

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  130. Investigation of physicochemical characteristics of selected lignocellulose biomass

    Article • Scientific Reports, February 2022, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  131. Load and Temperature Significance on Tensile Strength and Flow Stress Distributions of Ecae Aluminum 6063

    Article • January 2022, Bentham Science Publishers

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  132. Study on Combustion Characteristics and Thermodynamic Parameters of Thermal Degradation of Guinea Grass (Megathyrsus maximus) in N2-Pyrolytic and Oxidative Atmospheres

    Article • Sustainability, December 2021, MDPI AG

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  133. Evaluation of Non-Isothermal Kinetic Parameters for Pyrolysis of Teak Wood using Model-Fitting Techniques

    Article • Trends in Sciences, December 2021, College of Graduate Studies, Walailak University

    Dr Adekunle A Adeleke

  134. PHYSICO-TRIBOLOGICAL ANND WEAR MECHANISM CHARACTERISTICS OF HYBRID REINFFORCED Al6063 MATRIX COMPOSITES

    Article • Acta Metallurgica Slovaca, December 2021, SciCell

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  135. Mechanical properties and stress distribution in aluminium 6063 extrudates processed by equal channel angular extrusion technique

    Article • Australian Journal of Mechanical Engineering, November 2021, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  136. Tumbling strength and reactivity characteristics of hybrid fuel briquette of coal and biomass wastes blends

    Article • Alexandria Engineering Journal, October 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  137. Estimation of coefficient of performance of thermoelectric cooler using a 30 W single-stage type

    Article • International Review of Applied Sciences and Engineering, September 2021, Akademiai Kiado

    Dr Adekunle A Adeleke

  138. Sustainability of Multifaceted Usage of Biomass: A Review

    Article • Heliyon, September 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  139. Physico-chemical characterization, thermal decomposition and kinetic modeling of Digitaria sanguinalis under nitrogen and air environments

    Article • Case Studies in Thermal Engineering, August 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  140. Development of Methodology for Characterization of Surface Roughness of Solid Metallic Surfaces Using Oil Slippage Method

    Article • Latvian Journal of Physics and Technical Sciences, August 2021, De Gruyter

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  141. Synthesis, physico-mechanical and microstructural characterization of Al6063/SiC/PKSA hybrid reinforced composites

    Article • Scientific Reports, July 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  142. Kinetics modeling, thermodynamics and thermal performance assessments of pyrolytic decomposition of Moringa oleifera husk and Delonix regia pod

    Article • Scientific Reports, July 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  143. Optimization of the tribological properties of hybrid reinforced aluminium matrix composites using Taguchi and Grey's relational analysis

    Article • Scientific African, July 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  144. Mechanical Properties of Al 6063 Processed with Equal Channel Angular Extrusion under Varying Process Parameters

    Article • International Journal of Engineering Research in Africa, June 2021, Trans Tech Publications

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  145. Physical and mechanical characteristics of composite briquette from coal and pretreated wood fines

    Article • International Journal of Coal Science & Technology, May 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  146. Tribological and physical properties of hybrid reinforced aluminium matrix composites

    Article • Materials Today Proceedings, April 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  147. Magnesium inclusion effect on Al-Zn-Cu alloys: A study on microstructure and mechanical properties

    Article • Materials Today Proceedings, April 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  148. Fractal characterization of conductive Ag/flexible 3D printed PLA

    Article • IOP Conference Series Materials Science and Engineering, April 2021, Institute of Physics Publishing

    Dr Adekunle A Adeleke

  149. Effect of Heat Treatment on Micro Hardness and Microstructural Properties of Al 6063 Alloy Reinforced with Silver Nanoparticles (AgNps)

    Article • IOP Conference Series Materials Science and Engineering, April 2021, Institute of Physics Publishing

    Dr Adekunle A Adeleke

  150. Design and Fabrication of an Ablative Pyrolyzer for Production of Bio- lubricants and chemicals in Oil Well Drilling Application

    Article • IOP Conference Series Earth and Environmental Science, March 2021, Institute of Physics Publishing

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  151. Physicomechanical properties of composite tiles produced from granite dusts and municipal wastes

    Article • Innovative Infrastructure Solutions, January 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  152. Ash analyses of bio-coal briquettes produced using blended binder

    Article • Scientific Reports, January 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  153. Physico-mechanical properties of cement bonded ceiling board developed from teak and African locust bean tree wood residue

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI , OLUMOYEWA DOTUN ATOYEBI

  154. Characterization of some commercially available Nigerian coals as carbonaceous material for direct reduced iron production

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  155. Non-isothermal kinetic parametric evaluation of Tectona grandis using model-fitting methods

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  156. Effect of nickel-based laser coatings on phase composition and corrosion behaviour of titanium alloy for offshore application

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke

  157. Inhibition efficiency of gold nanoparticles on corrosion of mild steel, stainless steel and aluminium in 1M HCl solution

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke

  158. Energy from biomass and plastics recycling: a review

    Article • Cogent Engineering, January 2021, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  159. Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell

    Article • Results in Engineering, December 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  160. Development and characterization of wood-polypropylene plastic-cement composite board

    Article • Case Studies in Construction Materials, December 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  161. The inhibitive action of Plukenetia conophora plant extract on the corrosion of Al–Zn–Cu alloy in different acidic media

    Article • International Review of Applied Sciences and Engineering, November 2020, Akademiai Kiado

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  162. Mechanical properties and microstructural evaluation of heat-treated aluminum alloy using formulated bio-quenchants

    Article • International Review of Applied Sciences and Engineering, November 2020, Akademiai Kiado

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  163. Effectiveness of biodegradable oils as quenching media for commercial aluminium

    Article • Materiali in tehnologije, October 2020, Institute of Metals and Technology

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  164. Essential basics on biomass torrefaction, densification and utilization

    Article • International Journal of Energy Research, September 2020, Wiley

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  165. Comparative Analyses of the Inhibitive Influence of Cascabela thevetia and Jatropha curcas Leaves Extracts on Mild Steel

    Article • Nature Environment and Pollution Technology, September 2020, Technoscience Publications

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  166. Corrosion rates of green novel hybrid conversion coating on aluminium 6061

    Article • Results in Engineering, September 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  167. Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis

    Article • Heliyon, July 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  168. The ignitability, fuel ratio and ash fusion temperatures of torrefied woody biomass

    Article • Heliyon, March 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  169. A review on primary synthesis and secondary treatment of aluminium matrix composites

    Article • Arab Journal of Basic and Applied Sciences, January 2020, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  170. Recycling of plastics with compatibilizer as raw materials for the production of automobile bumper

    Article • Cogent Engineering, January 2020, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  171. A review of ceramic/bio-based hybrid reinforced aluminium matrix composites

    Article • Cogent Engineering, January 2020, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  172. Fabrication and Evaluation of Screw-like Fish Pelletizer

    Article • Journal of Physics Conference Series, December 2019, Institute of Physics Publishing

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  173. Comparative Analysis of Manual Strapping Method (MSM) and Electro-Optical Distance Ranging (EODR) Method of Tank Calibration

    Article • Journal of Physics Conference Series, December 2019, Institute of Physics Publishing

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  174. Microstructural assessment of AISI 1021 steel under rapid cyclic heat treatment process

    Article • Results in Engineering, December 2019, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  175. Combustion characteristics of fuel briquettes made from charcoal particles and sawdust agglomerates

    Article • Scientific African, November 2019, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  176. Evaluation of thermal decomposition characteristics and kinetic parameters of melina wood

    Article • Biofuels, August 2019, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  177. Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants

    Article • Journal of Failure Analysis and Prevention, August 2019, Springer Science + Business Media

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  178. Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders

    Article • Heliyon, July 2019, Elsevier

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  179. Mild Pyrolytic Treatment of Gmelina arborea for Optimum Energetic Yields

    Article • Cogent Engineering, March 2019, Taylor & Francis

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  180. Physico-mechanical assessment of plaster of Paris bandage produced from locally sourced materials

    Article • Bulletin of Materials Science, March 2019, Springer Science + Business Media

    Dr Adekunle A Adeleke

  181. Thermal and compositional properties of treated Tectona grandis

    Article • Biomass Conversion and Biorefinery, March 2019, Springer Science + Business Media

    Dr Adekunle A Adeleke

  182. Comparative analysis of anthropometric data of Hausas in northern and southern Nigeria

    Article • Istrazivanja i projektovanja za privredu, January 2019, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  183. Preliminary Characterisation of Iron Ores for Steel Making Processes

    Article • Procedia Manufacturing, January 2019, Elsevier

    Dr Adekunle A Adeleke

  184. Performance Evaluation of Solar Cooker Made from Locally Sourced Materials

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2019, Transstellar Journal Publications and Research Consultancy Private Limited

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  185. Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites

    Article • Data in Brief, December 2018, Elsevier

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  186. Physico-Mechanical Properties of Particleboards Produced from Locally Sourced Materials

    Article • International Journal of Engineering Research in Africa, November 2018, Trans Tech Publications

    Dr. Peter IKUBANNI , Adesoji Adediran, Dr Adekunle A Adeleke

  187. Data on mechanical properties evaluation of medium carbon steel quenched in different waste media

    Article • Data in Brief, October 2018, Elsevier

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  188. Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media

    Article • International Journal of Engineering Research in Africa, September 2017, Trans Tech Publications

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke, Adesoji Adediran

  189. Physical Properties of Biomass Fuel Briquette from Oil Palm Residues

    Article • Journal of Applied Sciences and Environmental Management, August 2017, African Journals Online (AJOL)

    Dr Adekunle A Adeleke

  190. Design and Fabrication of an Adjustable Sitting Inclinations Spinal Cord Rehabilitation Chair

    Article • January 2016, De Gruyter Open Sp. z o.o.

    Dr Adekunle A Adeleke

  191. Mechanical properties and microstructure of precipitation-hardened Al-Cu-Zn alloys

    Article • International Journal of Automotive and Mechanical Engineering, December 2015, Universiti Malaysia Pahang Publisher

    Dr Adekunle A Adeleke

  192. Evaluation of the Mechanical Properties of Reinforcing Steel Bars from Collapsed Building Sites

    Article • Journal of Failure Analysis and Prevention, August 2013, Springer Science + Business Media

    Dr Adekunle A Adeleke

  193. Analysis of Properties of Reinforcing Steel Bars: Case Study of Collapsed Building in Lagos, Nigeria

    Article • Applied Mechanics and Materials, October 2012, Trans Tech Publications

    Dr Adekunle A Adeleke