All Stories

  1. Heat Transfer Assessment During Droplet Impact Using CFD

    Article • Energies, May 2026, MDPI AG

    Professor T Staffan Lundström

  2. Numerical Simulation of Natural Convection in Freezing Water Droplets Using OpenFOAM

    Article • Water, April 2026, MDPI AG

    Professor T Staffan Lundström

  3. Capillary-Driven Flow Through Biological Porous Media: X-ray Microtomography and Computational Fluid Dynamics

    Article • Transport in Porous Media, October 2025, Springer Science + Business Media

    Professor T Staffan Lundström

  4. Hydraulic Modeling of Thermal Dynamics in a Generic Reservoir During Pumped Hydropower Operation

    Article • Environmental Modeling & Assessment, September 2025, Springer Science + Business Media

    Professor T Staffan Lundström

  5. Evaluating hydrogen gas transport in pipelines: Current state of numerical and experimental methodologies

    Article • International Journal of Hydrogen Energy, May 2024, Elsevier

    Professor T Staffan Lundström

  6. Stormwater Uptake in Sponge-Like Porous Bodies Surrounded by a Pond: A Fluid Mechanics Analysis

    Article • Water, September 2023, MDPI AG

    Professor T Staffan Lundström

  7. Modeling Convective Heat Transfer of Air in a Data Center Using OpenFOAM

    Article • OpenFOAM® Journal, August 2023, OpenCFD Ltd

    Professor T Staffan Lundström

  8. A comparative study on thermo-fluid characteristics of free and wall-bounded cross-flow heat exchangers

    Article • Thermal Science and Engineering Progress, May 2023, Elsevier

    Professor T Staffan Lundström

  9. Hybrid Modeling for Solutions of Sediment Deposition in a Low-Land Reservoir with Multigate Sluice Structure

    Article • Applied Sciences, September 2022, MDPI AG

    Professor T Staffan Lundström

  10. Experimental investigation of face mask filtration in the 15–150 μm range for stationary flows

    Article • Journal of Applied Physics, January 2022, American Institute of Physics

    Professor T Staffan Lundström

  11. Modeling the Swelling of Hydrogels with Application to Storage of Stormwater

    Article • Water, December 2020, MDPI AG

    Professor T Staffan Lundström

  12. Flow and sediment behaviours and morpho‐dynamics of a diffluence−Confluence unit

    Article • River Research and Applications, August 2020, Wiley

    Professor T Staffan Lundström

  13. Dynamic Distributed Storage of Stormwater in Sponge-Like Porous Bodies: Modelling Water Uptake

    Article • Water, July 2020, MDPI AG

    Professor T Staffan Lundström

  14. Comparing Internal Flow in Freezing and Evaporating Water Droplets Using PIV

    Article • Water, May 2020, MDPI AG

    Professor T Staffan Lundström

  15. Review of the Numerical Modeling of Compression Molding of Sheet Molding Compound

    Article • Processes, February 2020, MDPI AG

    Professor T Staffan Lundström

  16. A New Technical Concept for Water Management and Possible Uses in Future Water Systems

    Article • Water, November 2019, MDPI AG

    Professor T Staffan Lundström

  17. Comparing Performance Metrics of Partial Aisle Containments in Hard Floor and Raised Floor Data Centers Using CFD

    Article • Energies, April 2019, MDPI AG

    Professor T Staffan Lundström

  18. Wall Shear Stress Measurement on Curve Objects with PIV in Connection to Benthic Fauna in Regulated Rivers

    Article • Water, March 2019, MDPI AG

    Professor T Staffan Lundström

  19. Field Studies and 3D Modelling of Morphodynamics in a Meandering River Reach Dominated by Tides and Suspended Load

    Article • Fluids, January 2019, MDPI AG

    Professor T Staffan Lundström

  20. The Effect of Reynolds Number on Jet in Asymmetric Co-Flows: A CFD Study

    Article • International Journal of Chemical Engineering, October 2018, Hindawi Publishing Corporation

    Professor T Staffan Lundström

  21. Understanding Morphodynamic Changes of a Tidal River Confluence through Field Measurements and Numerical Modeling

    Article • Water, October 2018, MDPI AG

    Professor T Staffan Lundström

  22. Computational Fluid Dynamics Modeling and Validating Experiments of Airflow in a Data Center

    Article • Energies, March 2018, MDPI AG

    Professor T Staffan Lundström

  23. Evaporation of a sessile water droplet subjected to forced convection in humid environment

    Article • Drying Technology, March 2018, Taylor & Francis

    Professor T Staffan Lundström

  24. Modelling transport and deposition of non-spherical micro- and nano-particles in composites manufacturing

    Article • Journal of Reinforced Plastics and Composites, January 2018, SAGE Publications

    Professor T Staffan Lundström

  25. Modelling heat transfer during flow through a random packed bed of spheres

    Article • Heat and Mass Transfer, November 2017, Springer Science + Business Media

    Professor T Staffan Lundström

  26. A General Macroscopic Model for Turbulent Flow in Porous Media

    Article • Journal of Fluids Engineering, September 2017, ASME International

    Professor T Staffan Lundström

  27. Soot reduction in an entrained flow gasifier of biomass by active dispersion of fuel particles

    Article • Fuel, August 2017, Elsevier

    Professor T Staffan Lundström

  28. Heat and mass transfer boundary conditions at the surface of a heated sessile droplet

    Article • Heat and Mass Transfer, July 2017, Springer Science + Business Media

    Professor T Staffan Lundström

  29. Lubricating Grease Flow in a Double Restriction Seal Geometry: A Computational Fluid Dynamics Approach

    Article • Tribology Letters, May 2017, Springer Science + Business Media

    Professor T Staffan Lundström

  30. Experimental and simulation validation of ABHE for disinfection of Legionella in hot water systems

    Article • Applied Thermal Engineering, April 2017, Elsevier

    Professor T Staffan Lundström

  31. Large Eddy Simulation Investigation of an Industrial Cyclone Separator Fitted with a Pressure Recovery Deswirler

    Article • Chemical Engineering & Technology, March 2017, Wiley

    Professor T Staffan Lundström

  32. Study the Flow behind a Semi-Circular Step Cylinder (Laser Doppler Velocimetry (LDV) and Computational Fluid Dynamics (CFD))

    Article • Energies, March 2017, MDPI AG

    Professor T Staffan Lundström

  33. Numerical Simulations of Lubricating Grease Flow in a Rectangular Channel with and without Restrictions

    Article • Tribology Transactions, March 2017, Taylor & Francis

    Professor T Staffan Lundström

  34. Transitional and Turbulent Flow in a Bed of Spheres as Measured with Stereoscopic Particle Image Velocimetry

    Article • Transport in Porous Media, January 2017, Springer Science + Business Media

    Professor T Staffan Lundström

  35. Flow in thin domains with a microstructure: Lubrication and thin porous media

    Article • January 2017, American Institute of Physics

    Professor T Staffan Lundström, Professor Andreas Almqvist

  36. Numerical Investigation of Turbulent Flow through Rectangular and Biconvex Shaped Trash Racks

    Article • Engineering, January 2017, Scientific Research Publishing, Inc,

    Professor T Staffan Lundström

  37. Effects of the inlet angle on the collection efficiency of a cyclone with helical-roof inlet

    Article • Powder Technology, January 2017, Elsevier

    Professor T Staffan Lundström

  38. Modelling the Evaporation Rate in an Impingement Jet Dryer with Multiple Nozzles

    Article • International Journal of Chemical Engineering, January 2017, Hindawi Publishing Corporation

    Professor T Staffan Lundström

  39. CFD Simulation of Jet Mixing With Asymmetric Co-Flows in a Down-Scaled Rotary Kiln Model

    Article • November 2016, ASME International

    Professor T Staffan Lundström

  40. Measurements of Transitional and Turbulent Flow in a Randomly Packed Bed of Spheres with Particle Image Velocimetry

    Article • Transport in Porous Media, November 2016, Springer Science + Business Media

    Professor T Staffan Lundström

  41. Active fuel particles dispersion by synthetic jet in an entrained flow gasifier of biomass: Cold flow

    Article • Powder Technology, November 2016, Elsevier

    Professor T Staffan Lundström

  42. Smoothed Particle Hydrodynamic simulation of hydraulic jump using periodic open boundaries

    Article • Applied Mathematical Modelling, October 2016, Elsevier

    Professor T Staffan Lundström

  43. Cold flow experiments in an entrained flow gasification reactor with a swirl-stabilized pulverized biofuel burner

    Article • International Journal of Multiphase Flow, October 2016, Elsevier

    Professor T Staffan Lundström

  44. Simulation of the flow field in an iron ore pelletizing kiln

    Article • Minerals & Metallurgical Processing, August 2016, Society for Mining, Metallurgy and Exploration Inc.

    Professor T Staffan Lundström

  45. Influence of Inertial Particles on Turbulence Characteristics in Outer and Near Wall Flow as Revealed With High Resolution Particle Image Velocimetry

    Article • Journal of Fluids Engineering, June 2016, ASME International

    Professor T Staffan Lundström

  46. A stochastic two-scale model for pressure-driven flow between rough surfaces

    Article • Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, June 2016, Royal Society Publishing

    Mr Francesc Pérez-Ràfols, Professor T Staffan Lundström, Professor Andreas Almqvist

  47. Darcy’s Law for Flow in a Periodic Thin Porous Medium Confined Between Two Parallel Plates

    Article • Transport in Porous Media, May 2016, Springer Science + Business Media

    Professor T Staffan Lundström

  48. Modeling Transport and Deposition Efficiency of Oblate and Prolate Nano- and Micro-particles in a Virtual Model of the Human Airway

    Article • Journal of Fluids Engineering, May 2016, ASME International

    Professor T Staffan Lundström

  49. Modelling heat transfer inside an autoclave: Effect of radiation

    Article • Journal of Reinforced Plastics and Composites, April 2016, SAGE Publications

    Professor T Staffan Lundström

  50. Discrete and continuous modelling of convective heat transport in a thin porous layer of mono sized spheres

    Article • Heat and Mass Transfer, April 2016, Springer Science + Business Media

    Professor T Staffan Lundström

  51. Vacuum infusion of cellulose nanofibre network composites: Influence of porosity on permeability and impregnation

    Article • Materials & Design, April 2016, Elsevier

    Professor T Staffan Lundström

  52. An experimental study of temperature distribution in an autoclave

    Article • Journal of Reinforced Plastics and Composites, January 2016, SAGE Publications

    Professor T Staffan Lundström

  53. Velocity distribution measurements in a fishway like open channel by Laser Doppler Anemometry (LDA)

    Article • EPJ Web of Conferences, January 2016, EDP Sciences

    Professor T Staffan Lundström

  54. A Review of Particle Image Velocimetry for Fish Migration

    Article • World Journal of Mechanics, January 2016, Scientific Research Publishing, Inc,

    Professor T Staffan Lundström

  55. Smoothed Particle Hydrodynamic Modelling of Hydraulic Jumps: Bulk Parameters and Free Surface Fluctuations

    Article • Engineering, January 2016, Scientific Research Publishing, Inc,

    Professor T Staffan Lundström

  56. A validated CFD model for prediction of selective non-catalytic reduction of nitric oxide by cyanuric acid

    Article • Progress in Computational Fluid Dynamics An International Journal, January 2016, Inderscience Publishers

    Professor T Staffan Lundström

  57. NUMERICAL COMPUTATION OF MACROSCOPIC TURBULENT QUANTITIES IN A POROUS MEDIUM: AN EXTENSION TO A MACROSCOPIC TURBULENCE MODEL

    Article • Journal of Porous Media, January 2016, Begell House

    Professor T Staffan Lundström

  58. Effects of the inlet angle on the flow pattern and pressure drop of a cyclone with helical-roof inlet

    Article • Chemical Engineering Research and Design, October 2015, Elsevier

    Professor T Staffan Lundström

  59. Influence of Plate Size on the Evaporation Rate of a Heated Droplet

    Article • Drying Technology, August 2015, Taylor & Francis

    Professor T Staffan Lundström

  60. Computational Investigation of an Industrial Cyclone Separator with Helical-Roof Inlet

    Article • Chemical Engineering & Technology, July 2015, Wiley

    Professor T Staffan Lundström

  61. Dynamic Modeling of Stacked, Multi-Plate Flexible Systems

    Article • Experimental Mechanics, July 2015, Springer Science + Business Media

    Professor T Staffan Lundström

  62. Modeling of a Groundwater Mound in a Two-Dimensional Heterogeneous Unconfined Aquifer in Response to Precipitation Recharge

    Article • Journal of Hydrologic Engineering, July 2015, American Society of Civil Engineers (ASCE)

    Professor T Staffan Lundström

  63. Evaluation of Guiding Device for Downstream Fish Migration with in-Field Particle Tracking Velocimetry and CFD

    Article • Journal of Applied Fluid Mechanics, July 2015, CASRP: Center of Advanced Scientific Research and Publications

    Professor T Staffan Lundström

  64. The Flow Field in a Virtual Model of a Rotary Kiln as a Function of Inlet Geometry and Momentum Flux Ratio

    Article • Journal of Fluids Engineering, June 2015, ASME International

    Professor T Staffan Lundström

  65. PIV/PLIF experiments of jet mixing in a model of a rotary kiln

    Article • Experiments in Fluids, May 2015, Springer Science + Business Media

    Professor T Staffan Lundström

  66. Interaction between the Flow in Two Nearby Pores within a Porous Material during Transitional and Turbulent Flow

    Article • Journal of Applied Fluid Mechanics, April 2015, CASRP: Center of Advanced Scientific Research and Publications

    Professor T Staffan Lundström

  67. Compression moulding of sheet moulding compound: Modelling with computational fluid dynamics and validation

    Article • Journal of Reinforced Plastics and Composites, March 2015, SAGE Publications

    Professor T Staffan Lundström

  68. Calculation of Kiln Aerodynamics with two RANS Turbulence Models and by DDES

    Article • Flow Turbulence and Combustion, February 2015, Springer Science + Business Media

    Professor T Staffan Lundström

  69. Modelling Dam Break Evolution over a Wet Bed with Smoothed Particle Hydrodynamics: A Parameter Study

    Article • Engineering, January 2015, Scientific Research Publishing, Inc,

    Professor T Staffan Lundström

  70. A CFD-based evaluation of selective non-catalytic reduction of nitric oxide in iron ore grate-kiln plants

    Article • Progress in Computational Fluid Dynamics An International Journal, January 2015, Inderscience Publishers

    Professor T Staffan Lundström

  71. Turbulent Modulation in Particulate Flow: A Review of Critical Variables

    Article • Engineering, January 2015, Scientific Research Publishing, Inc,

    Professor T Staffan Lundström

  72. MODELLING EVAPORATION OF A WATER DROPLET IN HUMID ENVIRONMENT

    Article • January 2015, Begell House

    Professor T Staffan Lundström

  73. Flow-Induced Deformations Within Random Packed Beds of Spheres

    Article • Transport in Porous Media, May 2014, Springer Science + Business Media

    Professor T Staffan Lundström

  74. Effect of Spatial Resolution of Rough Surfaces on Numerically Computed Flow Fields with Application to Hydraulic Engineering

    Article • Engineering Applications of Computational Fluid Mechanics, January 2014, Taylor & Francis

    Professor T Staffan Lundström

  75. INFLUENCE OF INTERNAL NATURAL CONVECTION ON WATER DROPLETS FREEZING ON COLD SURFACES

    Article • January 2014, Begell House

    Professor T Staffan Lundström

  76. NUMERICAL STUDY OF THE HEAT AND MASS TRANSFER CONDITIONS AT THE SURFACE OF A HEATED DROPLET

    Article • January 2014, Begell House

    Professor T Staffan Lundström

  77. Challenges and Opportunities within Simulation-driven Functional Product Development and Operation

    Article • Procedia CIRP, January 2014, Elsevier

    Professor T Staffan Lundström

  78. Enhancing the Reliability of Laboratory Phosphorus Filter Tests: Effect of Influent Properties and Interpretation of Effluent Parameters

    Article • Water Air & Soil Pollution, November 2013, Springer Science + Business Media

    Professor T Staffan Lundström

  79. Experimental Investigation of Transitional Flow in Porous Media with Usage of a Pore Doublet Model

    Article • Transport in Porous Media, November 2013, Springer Science + Business Media

    Professor T Staffan Lundström

  80. Numerical derivation of dispersion coefficients for flow through three‐dimensional randomly packed beds of monodisperse spheres

    Article • AIChE Journal, November 2013, Wiley

    Professor T Staffan Lundström

  81. Modeling phosphate transport and removal in a compact bed filled with a mineral-based sorbent for domestic wastewater treatment

    Article • Journal of Contaminant Hydrology, November 2013, Elsevier

    Professor T Staffan Lundström

  82. Dynamic Modeling and Updating of a Stacked Plate Dynamic System

    Article • October 2013, ASME International

    Professor T Staffan Lundström

  83. Methods for locating the proper position of a planned fishway entrance near a hydropower tailrace

    Article • Limnologica, September 2013, Elsevier

    Professor T Staffan Lundström

  84. The Effect of Hydraulic Loading Rate and Influent Source on the Binding Capacity of Phosphorus Filters

    Article • PLOS One, August 2013, PLOS

    Professor T Staffan Lundström

  85. Transversal flow-induced deformation of fibres during composites manufacturing and the effect on permeability

    Article • Journal of Reinforced Plastics and Composites, June 2013, SAGE Publications

    Professor T Staffan Lundström

  86. Appropriate Rigid Body Correction of Stereophotogrammetry Measurements Made on Rotating Systems

    Article • Experimental Techniques, June 2013, Springer Science + Business Media

    Professor T Staffan Lundström

  87. Longitudinal Dispersion Coefficient: Effects of Particle-Size Distribution

    Article • Transport in Porous Media, May 2013, Springer Science + Business Media

    Professor T Staffan Lundström

  88. CFD-Modelling and Validation of Free Surface Flow During Spilling of Reservoir in Down-Scale Model

    Article • Engineering Applications of Computational Fluid Mechanics, January 2013, Taylor & Francis

    Professor T Staffan Lundström

  89. Simulation Driven Processing Function Development, Offering and Operation

    Article • November 2012, ASME International

    Professor T Staffan Lundström

  90. μPIV measurement of grease velocity profiles in channels with two different types of flow restrictions

    Article • Tribology International, October 2012, Elsevier

    Professor T Staffan Lundström

  91. Modeling filtration of particulate flow during impregnation of dual-scale fabrics

    Article • Journal of Composite Materials, August 2012, SAGE Publications

    Professor T Staffan Lundström

  92. The calculations of dispersion coefficients inside two-dimensional randomly packed beds of circular particles

    Article • AIChE Journal, July 2012, Wiley

    Professor T Staffan Lundström

  93. Discrete and Continuous Modeling of Heat and Mass Transport in Drying of a Bed of Iron Ore Pellets

    Article • Drying Technology, June 2012, Taylor & Francis

    Professor T Staffan Lundström

  94. PIV analysis of merging flow in a simplified model of a rotary kiln

    Article • Experiments in Fluids, May 2012, Springer Science + Business Media

    Professor T Staffan Lundström

  95. Phosphorus binding toFiltra Pin batch tests

    Article • Environmental Technology, May 2012, Taylor & Francis

    Professor T Staffan Lundström

  96. An asymptotic approach of Brownian deposition of nanofibres in pipe flow

    Article • Theoretical and Computational Fluid Dynamics, March 2012, Springer Science + Business Media

    Professor T Staffan Lundström

  97. A Study of the Location of the Entrance of a Fishway in a Regulated River with CFD and ADCP

    Article • Modelling and Simulation in Engineering, January 2012, Hindawi Publishing Corporation

    Professor T Staffan Lundström

  98. The effect of inertia and angular momentum of a fluid annulus on lateral transversal rotor vibrations

    Article • Journal of Fluids and Structures, January 2012, Elsevier

    Professor T Staffan Lundström

  99. Time-Dependent Deposition of Micro- and Nanofibers in Straight Model Airways

    Article • Journal of Fluids Engineering, January 2012, ASME International

    Professor T Staffan Lundström

  100. Using High-Speed Stereophotogrammetry Techniques to Extract Shape Information from Wind Turbine/Rotor Operating Data

    Article • January 2012, Springer Science + Business Media

    Professor T Staffan Lundström

  101. The Influence of Speed, Grease Type, and Temperature on Radial Contaminant Particle Migration in a Double Restriction Seal

    Article • Tribology Transactions, November 2011, Taylor & Francis

    Professor T Staffan Lundström

  102. A New Method to Visualize Grease Flow in a Double Restriction Seal Using Microparticle Image Velocimetry

    Article • Tribology Transactions, September 2011, Taylor & Francis

    Professor T Staffan Lundström

  103. Simulation of convective drying of a cylindrical iron ore pellet

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, August 2011, Emerald

    Professor T Staffan Lundström

  104. Convective drying of an individual iron ore pellet – Analysis with CFD

    Article • International Journal of Heat and Mass Transfer, August 2011, Elsevier

    Professor T Staffan Lundström

  105. Influence of Air Humidity on Drying of Individual Iron Ore Pellets

    Article • Drying Technology, July 2011, Taylor & Francis

    Professor T Staffan Lundström

  106. Fluid Flow Induced Internal Erosion within Porous Media: Modelling of the No Erosion Filter Test Experiment

    Article • Transport in Porous Media, May 2011, Springer Science + Business Media

    Professor T Staffan Lundström

  107. Influence of flow-induced deformations of fabrics on the formation and transport of bubbles during liquid moulding processes

    Article • Mechanics of Composite Materials, May 2011, Springer Science + Business Media

    Professor T Staffan Lundström

  108. Motion of dispersed carbon nanotubes during impregnation of fabrics

    Article • Plastics Rubber and Composites Macromolecular Engineering, March 2011, Taylor & Francis

    Professor T Staffan Lundström

  109. Modelling of particle deposition during impregnation of dual scale fabrics

    Article • Plastics Rubber and Composites Macromolecular Engineering, March 2011, Taylor & Francis

    Professor T Staffan Lundström

  110. Burner Backflow Reduction in Regeneration Furnace

    Article • Engineering Applications of Computational Fluid Mechanics, January 2011, Taylor & Francis

    Professor T Staffan Lundström

  111. Secondary Flow in Semi-Circular Ducts

    Article • Journal of Fluids Engineering, January 2011, ASME International

    Professor T Staffan Lundström

  112. Mechanisms of flow-induced deformation of porous media

    Article • Journal of Fluid Mechanics, October 2010, Cambridge University Press

    Professor T Staffan Lundström

  113. Respiratory Deposition of Fibers in the Non-Inertial Regime—Development and Application of a Semi-Analytical Model

    Article • Aerosol Science and Technology, August 2010, Taylor & Francis

    Professor T Staffan Lundström

  114. Investigation of Grease Flow in a Rectangular Channel Including Wall Slip Effects Using Microparticle Image Velocimetry

    Article • Tribology Transactions, July 2010, Taylor & Francis

    Professor T Staffan Lundström

  115. Flow characterization of an attraction channel as entrance to fishways

    Article • River Research and Applications, July 2010, Wiley

    Professor T Staffan Lundström

  116. Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry

    Article • Composites Part A Applied Science and Manufacturing, January 2010, Elsevier

    Professor T Staffan Lundström

  117. LAMINAR AND TURBULENT FLOWTHROUGH AN ARRAY OF CYLINDERS

    Article • Journal of Porous Media, January 2010, Begell House

    Professor T Staffan Lundström

  118. The effect of cartilaginous rings on particle deposition by convection and Brownian diffusion

    Article • Natural Science, January 2010, Scientific Research Publishing, Inc,

    Professor T Staffan Lundström

  119. CFD-modelling of Selective Non-Catalytic Reduction of NOx in grate-kiln plants

    Article • Progress in Computational Fluid Dynamics An International Journal, January 2010, Inderscience Publishers

    Professor T Staffan Lundström

  120. Design of experiment study of compression moulding of SMC

    Article • Plastics Rubber and Composites Macromolecular Engineering, December 2009, Taylor & Francis

    Professor T Staffan Lundström

  121. Lattice Gas Analysis of Liquid Front in Non-Crimp Fabrics

    Article • Transport in Porous Media, October 2009, Springer Science + Business Media

    Professor T Staffan Lundström

  122. Compression moulding simulations of SMC using a multiobjective surrogate-based inverse modeling approach

    Article • Mechanics of Composite Materials, September 2009, Springer Science + Business Media

    Professor T Staffan Lundström

  123. Dissolution of Voids during Compression Molding of SMC

    Article • Journal of Reinforced Plastics and Composites, June 2009, SAGE Publications

    Professor T Staffan Lundström

  124. Flow through a Two-Scale Porosity Material

    Article • Research Letters in Materials Science, January 2009, Hindawi Publishing Corporation

    Professor T Staffan Lundström

  125. An investigation of particle deposition mechanisms during impregnation of dual-scale fabrics with Micro Particle Image Velocimetry

    Article • Polymer Composites, January 2009, Wiley

    Professor T Staffan Lundström

  126. Flow design of guiding device for downstream fish migration

    Article • River Research and Applications, January 2009, Wiley

    Professor T Staffan Lundström

  127. High-Cycle Thermal Fatigue in Mixing Tees: New Large-Eddy Simulations Validated Against New Data Obtained by PIV in the Vattenfall Experiment

    Article • January 2009, ASME International

    Professor T Staffan Lundström

  128. Permeability of Sinter Bronze Friction Material for Wet Clutches

    Article • Tribology Transactions, May 2008, Taylor & Francis

    Professor T Staffan Lundström

  129. Bubble motion through non-crimp fabrics during composites manufacturing

    Article • Composites Part A Applied Science and Manufacturing, February 2008, Elsevier

    Professor T Staffan Lundström

  130. HEAT, MASS AND MOMENTUM TRANSFER WITHIN AN IRON ORE PELLET DURING DRYING

    Article • January 2008, Begell House

    Professor T Staffan Lundström

  131. Wetting dynamics in multiscale porous media. Porous pore-doublet model, experiment and theory

    Article • AIChE Journal, January 2008, Wiley

    Professor T Staffan Lundström

  132. Effect of Multi-Scale Porosity in Local Permeability Modelling of Non-Crimp Fabrics

    Article • Transport in Porous Media, October 2007, Springer Science + Business Media

    Professor T Staffan Lundström

  133. Particle deposition mechanisms during processing of advanced composite materials

    Article • Composites Part A Applied Science and Manufacturing, October 2007, Elsevier

    Professor T Staffan Lundström

  134. Parallel CFD simulations of an original and redesigned hydraulic turbine draft tube

    Article • Advances in Engineering Software, May 2007, Elsevier

    Professor T Staffan Lundström

  135. Automatic Recognition and Analysis of Scanned Non-crimp Fabrics for Calculation of their Fluid Flow Permeability

    Article • Journal of Reinforced Plastics and Composites, February 2007, SAGE Publications

    Professor T Staffan Lundström

  136. Response surface‐based shape optimization of a Francis draft tube

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, January 2007, Emerald

    Professor T Staffan Lundström

  137. Hydraulic Turbine Diffuser Shape Optimization by Multiple Surrogate Model Approximations of Pareto Fronts

    Article • Journal of Fluids Engineering, January 2007, ASME International

    Professor T Staffan Lundström

  138. Permeability network model for non-crimp fabrics

    Article • Composites Part A Applied Science and Manufacturing, June 2006, Elsevier

    Professor T Staffan Lundström

  139. Redesign of a sharp heel draft tube by a validated CFD-optimization

    Article • International Journal for Numerical Methods in Fluids, January 2006, Wiley

    Professor T Staffan Lundström

  140. Mechanisms Controlling Particle Distribution in Infusion Molded Composites

    Article • Journal of Reinforced Plastics and Composites, January 2006, SAGE Publications

    Professor T Staffan Lundström

  141. Modeling of Power-law Fluid Flow Through Fiber Beds

    Article • Journal of Composite Materials, June 2005, SAGE Publications

    Professor T Staffan Lundström

  142. Numerical Study of the Local Permeability of Noncrimp Fabrics

    Article • Journal of Composite Materials, May 2005, SAGE Publications

    Professor T Staffan Lundström

  143. Liquid Permeability of an Anisotropic Fiber Web

    Article • Textile Research Journal, April 2005, SAGE Publications

    Professor T Staffan Lundström

  144. Computational fluid dynamics applied to the vacuum infusion process

    Article • Polymer Composites, February 2005, Wiley

    Professor T Staffan Lundström

  145. Experimental flow-front visualisation in compression moulding of SMC

    Article • Composites Part A Applied Science and Manufacturing, October 2004, Elsevier

    Professor T Staffan Lundström

  146. A Statistical Approach to Permeability of Clustered Fibre Reinforcements

    Article • Journal of Composite Materials, July 2004, SAGE Publications

    Professor T Staffan Lundström

  147. Application of digital speckle photography to measure thickness variations in the vacuum infusion process

    Article • Polymer Composites, June 2003, Wiley

    Professor T Staffan Lundström

  148. Numerical model for vacuum infusion manufacturing of polymer composites

    Article • International Journal of Numerical Methods for Heat & Fluid Flow, May 2003, Emerald

    Professor T Staffan Lundström

  149. Article • Mechanics of Composite Materials, January 2003, Springer Science + Business Media

    Professor T Staffan Lundström

  150. Flow-enhancing layers in the vacuum infusion process

    Article • Polymer Composites, October 2002, Wiley

    Professor T Staffan Lundström

  151. Journals based on applications: An attempt to improve students' learning about composite materials

    Article • European Journal of Engineering Education, June 2002, Taylor & Francis

    Professor T Staffan Lundström

  152. Digital speckle photography: visualization of mesoflow through clustered fiber networks

    Article • Applied Optics, March 2002, Optical Society of America (OSA)

    Professor T Staffan Lundström

  153. Article • Transport in Porous Media, January 2002, Springer Science + Business Media

    Professor T Staffan Lundström

  154. Automatic Design of Hydropower Flows: The Draft Tube

    Article • January 2002, ASME International

    Professor T Staffan Lundström

  155. The permeability of non-crimp stitched fabrics

    Article • Composites Part A Applied Science and Manufacturing, December 2000, Elsevier

    Professor T Staffan Lundström

  156. In-plane permeability measurements: a nordic round-robin study

    Article • Composites Part A Applied Science and Manufacturing, January 2000, Elsevier

    Professor T Staffan Lundström

  157. In-plane permeability measurements on fiber reinforcements by the multi-cavity parallel flow technique

    Article • Polymer Composites, February 1999, Wiley

    Professor T Staffan Lundström

  158. Measurement of void collapse during resin transfer moulding

    Article • Composites Part A Applied Science and Manufacturing, January 1997, Elsevier

    Professor T Staffan Lundström

  159. Bubble transport through constricted capillary tubes with application to resin transfer molding

    Article • Polymer Composites, December 1996, Wiley

    Professor T Staffan Lundström

  160. Effect of Perturbation of Fibre Architecture on Permeability Inside Fibre Tows

    Article • Journal of Composite Materials, March 1995, SAGE Publications

    Professor T Staffan Lundström

  161. Effect of voids on failure mechanisms in RTM laminates

    Article • Composites Science and Technology, January 1995, Elsevier

    Professor T Staffan Lundström

  162. Influence from process parameters on void formation in resin transfer molding

    Article • Polymer Composites, February 1994, Wiley

    Professor T Staffan Lundström

  163. Void Formation in RTM

    Article • Journal of Reinforced Plastics and Composites, December 1993, SAGE Publications

    Professor T Staffan Lundström