All Stories

  1. Dissecting steric and polar substituent effects in linear free energy Relationships: Re-Assessment of the Taft equation with Temperature-Dependent kinetic modeling
  2. Safe and direct conversion of 2,4-Dinitrotoluene into 1-Methyl-2,4-Cyclohexane-Diamine: A One-Pot hydrogenation reaction route catalyzed by Lithium-Modified γ-Al2O3-Supported ruthenium nanoclusters
  3. Enhanced butyl levulinate synthesis from cellulose under high-gravity Conditions: Catalyst and solvent optimization
  4. Comprehensive Compilation on Esterification Reactions and Predicting Reaction Kinetics and Equilibrium Using PC-SAFT
  5. Predicting Proton Activity and Acid Dissociation Equilibria in Mixed-Solvent Systems, and Their Impact on Esterification Kinetics of Levulinic Acid
  6. Design and application of low pressure and low temperature facility to study aeronautical flame during pull-away
  7. Production of furfural: From kinetics to process assessment
  8. Sustainable design of biomass valorization processes for the production of gamma valerolactone integrating wind energy and green hydrogen
  9. Surrogate modeling based uncertainties analysis for the determination of safe and optimal operating conditions in batch reactors
  10. Epoxidation Showdown: Unveiling the Kinetics of Vegetable Oils vs Their Methyl Ester Counterparts
  11. Determining the safe operating conditions for gas–liquid heterogeneous reactions in an isochoric semi-batch reactor
  12. Process optimization and scale-up of toluene nitration in a microchannel reactor using HNO3-AC2O as nitrating agent
  13. Impact of aleatory and epistemic uncertainties on thermal risk and production assessment: Application to the hydrogenation of levulinic acid and butyl levulinate
  14. Catalytic cycloaddition of CO2 to epoxidized methyl oleate over a HBimCl-NbCl5/HCMC: Physicochemical, mass transfer and kinetic investigation
  15. From biomass-derived fructose to γ-valerolactone: Process design and techno-economic assessment
  16. Combination of linear solvation energy and linear free-energy relationships to aid the prediction of reaction kinetics: Application to the solvolysis of 5-HMF by alcohol to levulinate
  17. Catalytic Epoxidation Reaction
  18. Combining Isothermal and Adiabatic Mode Experiments for Kinetic Constant Estimation: Application to the Hydrogenation of 5-(Hydroxymethyl)furfural (5-HMF)
  19. Kinetics and reactor modelling of a complex three-phase system: Carbonation of epoxides on grafted catalysts
  20. Competitive and non-competitive adsorption of six heavy metals on flax fibers
  21. Temperature effect on the steric and polar Taft substituent parameter values
  22. Reactivity and structure: epoxidation of cottonseed oil and the corresponding fatty acid methyl ester
  23. Assessment of kinetic models for the production of γ-valerolactone developed in isothermal, adiabatic and isoperibolic conditions
  24. Production of butyl levulinate from the solvolysis of high-gravity fructose over heterogeneous catalyst: In-depth kinetic modeling
  25. Kinetic modelling: Regression and validation stages, a compulsory tandem for kinetic model assessment
  26. Application of Multi-Software Engineering: A Review and a Kinetic Parameter Identification Case Study
  27. Reaction enthalpies for the hydrogenation of alkyl levulinates and levulinic acid on Ru/C– influence of experimental conditions and alkyl chain length
  28. Cover Feature: Activity‐Based Models to Predict Kinetics of Levulinic Acid Esterification (ChemPhysChem 4/2023)
  29. In-Depth Kinetic Modeling and Chemical Analysis for the Epoxidation of Vegetable Oils in a Liquid–Liquid–Solid System
  30. Thermal Stability for the Continuous Production of γ-Valerolactone from the Hydrogenation of N-Butyl Levulinate in a CSTR
  31. Anionic synthesis and end-functionalization of polymyrcene in a flow microreactor system
  32. Biocatalyst and continuous microfluidic reactor for an intensified production of n-butyl levulinate: Kinetic model assessment
  33. Activity‐Based Models to Predict Kinetics of Levulinic Acid Esterification
  34. Solvent effect investigation on the acid-catalyzed esterification of levulinic acid by ethanol aided by a Linear Solvation Energy Relationship
  35. Evaluation of refractive index gradients in droplets by rainbow technique: application to CO$$_2$$ capture by monoethanolamine aqueous spray
  36. Kinetic modeling of the sesamin conversion into asarinin in the presence of citric acid loading on Hβ
  37. Kinetic Study and Model Assessment for n-Butyl Levulinate Production from Alcoholysis of 5-(Hydroxymethyl)furfural over Amberlite IR-120
  38. Global sensitivity analysis to identify influential model input on thermal risk parameters: To cottonseed oil epoxidation
  39. Hydrolysis of semi‐industrial aqueous extracted xylan from birch (Betula pendula) employing commercial catalysts: kinetics and modelling
  40. Role of solvent in enhancing the production of butyl levulinate from fructose
  41. Rebalancing the Historical Female Underrepresentation in Education
  42. New insights into the cocatalyst-free carbonation of vegetable oil derivatives using heterogeneous catalysts
  43. A new perspective on vegetable oil epoxidation modeling: Reaction and mass transfer in a liquid–liquid–solid system
  44. Determination of kinetic constants by using transient temperature data from continuous stirred tank reactors
  45. Kinetic model assessment for the synthesis of γ-valerolactone from n-butyl levulinate and levulinic acid hydrogenation over the synergy effect of dual catalysts Ru/C and Amberlite IR-120
  46. Production of levulinic acid and alkyl levulinates: a process insight
  47. One flow through hydrolysis and hydrogenation of semi-industrial xylan from birch (betula pendula) in a continuous reactor—Kinetics and modelling
  48. Reductive Catalytic Depolymerization of Semi-industrial Wood-Based Lignin
  49. Hydrolysis of semi‐industrial aqueous extracted xylan from birch ( Betula pendula ) employing commercial catalysts: kinetics and modelling
  50. Influence assessment of inlet parameters on thermal risk and productivity: Application to the epoxidation of vegetable oils
  51. Model Discrimination for Hydrogen Peroxide Consumption towards γ-Alumina in Homogeneous Liquid and Heterogeneous Liquid-Liquid Systems
  52. Piezoelectric effect synergistically enhances the performance of Ti32-oxo-cluster/BaTiO3/CuS p-n heterojunction photocatalytic degradation of pollutants
  53. Bayesian Statistics to Elucidate the Kinetics of γ-Valerolactone from n-Butyl Levulinate Hydrogenation over Ru/C
  54. Kinetic study of the carbonation of epoxidized fatty acid methyl ester catalyzed over heterogeneous catalyst HBimCl‐NbCl 5 /HCMC
  55. The Lord of the Chemical Rings: Catalytic Synthesis of Important Industrial Epoxide Compounds
  56. Special Issue on “Thermal Safety of Chemical Processes”
  57. Novel Intensified Alternatives for Purification of Levulinic Acid Recovered from Lignocellulosic Biomass
  58. Solvent effect on the kinetics of the hydrogenation of n-butyl levulinate to γ-valerolactone
  59. Use of semibatch reactor technology for the investigation of reaction mechanism and kinetics: Heterogeneously catalyzed epoxidation of fatty acid esters
  60. Influence of steric effects on the kinetics of cyclic-carbonate vegetable oils aminolysis
  61. From calorimetry to thermal risk assessment: γ-Valerolactone production from the hydrogenation of alkyl levulinates
  62. Kinetic study of Amberlite IR120 catalyzed acid esterification of levulinic acid with ethanol: From batch to continuous operation
  63. CFD Modeling of Spatial Inhomogeneities in a Vegetable Oil Carbonation Reactor
  64. Evolution of Specific Heat Capacity with Temperature for Typical Supports Used for Heterogeneous Catalysts
  65. Physicochemical Properties for the Reaction Systems: Levulinic Acid, Its Esters, and γ-Valerolactone
  66. Epoxidation of Tall Oil Catalyzed by an Ion Exchange Resin under Conventional Heating and Microwave Irradiation
  67. Kinetic modeling using temperature as an on-line measurement: Application to the hydrolysis of acetic anhydride, a revisited kinetic model
  68. Effects of Nanoparticle Enhanced Lubricant Films in Thermal Design of Plain Journal Bearings at High Reynolds Numbers
  69. Kinetics and reactor modelling of fatty acid epoxidation in the presence of heterogeneous catalyst
  70. Analysis of thermal runaway events in French chemical industry
  71. Thermal risk assessment for the epoxidation of linseed oil by classical Prisleschajew epoxidation and by direct epoxidation by H2O2 on alumina
  72. Application of the concept of Linear Free Energy Relationships to the hydrogenation of levulinic acid and its corresponding esters
  73. Screening of ion exchange resin catalysts for epoxidation of oleic acid under the influence of conventional and microwave heating
  74. Kinetic modelling of Prileschajew epoxidation of oleic acid under conventional heating and microwave irradiation
  75. A consequences-based approach for the selection of relevant accident scenarios in emerging technologies
  76. Structure–Reactivity: Comparison between the Carbonation of Epoxidized Vegetable Oils and the Corresponding Epoxidized Fatty Acid Methyl Ester
  77. Model-based fault detection and isolation for chemical processes: Application to the prevention of thermal runaway
  78. Parameters affecting thermal risk through a kinetic model under adiabatic condition: Application to liquid-liquid reaction system
  79. Aminolysis of cyclic-carbonate vegetable oils as a non-isocyanate route for the synthesis of polyurethane: A kinetic and thermal study
  80. Thermal Risk Assessment of Levulinic Acid Hydrogenation to γ-Valerolactone
  81. Influence of ring-opening reactions on the kinetics of cottonseed oil epoxidation
  82. Risk analysis of French chemical industry
  83. Investigation of the Physicochemical Properties for Vegetable Oils and Their Epoxidized and Carbonated Derivatives
  84. Solar tracker for enhancement of the thermal efficiency of solar water heating system
  85. Synthesis of carbonated vegetable oils: Investigation of microwave effect in a pressurized continuous-flow recycle batch reactor
  86. The aid of calorimetry for kinetic and thermal study
  87. Epoxidation of Fatty Acids and Vegetable Oils Assisted by Microwaves Catalyzed by a Cation Exchange Resin
  88. Zero-Order Versus Intrinsic Kinetics for the Determination of the Time to Maximum Rate under Adiabatic Conditions (TMRad): Application to the Decomposition of Hydrogen Peroxide
  89. Complexation equilibria studies of alkyl formate hydrolysis in the presence of 1-butylimidazole
  90. Influence of gas-liquid mass transfer on kinetic modeling: Carbonation of epoxidized vegetable oils
  91. Thermal Safety Assessment through the Concept of Structure–Reactivity: Application to Vegetable Oil Valorization
  92. Comparative investigation for the determination of kinetic parameters for biomass pyrolysis by thermogravimetric analysis
  93. Cooling and stirring failure for semi-batch reactor: Application to exothermic reactions in multiphase reactor
  94. Mass & energy balances coupling in chemical reactors for a better understanding of thermal safety
  95. Thermal Stability of Epoxidized and Carbonated Vegetable Oils
  96. Epoxidation of oleic acid under conventional heating and microwave radiation
  97. Designing and Demonstrating a Master Student Project To Explore Carbon Dioxide Capture Technology
  98. Alternative method to prevent thermal runaway in case of error on operating conditions continuous reactor
  99. Carbonation of Vegetable Oils: Influence of Mass Transfer on Reaction Kinetics
  100. Kinetic modeling strategy for an exothermic multiphase reactor system: Application to vegetable oils epoxidation using Prileschajew method
  101. Thermal risk assessment of vegetable oil epoxidation
  102. Towards Production of γ-valerolactone via Hydrogenation of Aqueous Levulinic Acid
  103. Epoxidation of vegetable oils under microwave irradiation
  104. Interaction of thermal and kinetic parameters for a liquid–liquid reaction system: Application to vegetable oils epoxidation by peroxycarboxylic acid
  105. A multiobjective optimization model for designing and optimizing an ecological industrial park
  106. Industrial Symbiosis Optimization Control Model for the exchanges of the material/energy flows in an industrial production park
  107. Modeling and Optimization of Material/Energy Flow Exchanges in an Eco-Industrial Park
  108. From Kinetic Study to Thermal Safety Assessment: Application to Peroxyformic Acid Synthesis
  109. Modeling of a Liquid–Liquid–Solid Heterogeneous Reaction System: Model System and Peroxyvaleric Acid
  110. Green process technology for peroxycarboxylic acids: Estimation of kinetic and dispersion parameters aided by RTD measurements: Green synthesis of peroxycarboxylic acids
  111. Batch and Semibatch Partial Oxidation of Starch by Hydrogen Peroxide in the Presence of an Iron Tetrasulfophthalocyanine Catalyst: The Effect of Ultrasound and the Catalyst Addition Policy
  112. Stability of hydrogen peroxide during perhydrolysis of carboxylic acids on acidic heterogeneous catalysts
  113. Interaction of intrinsic kinetics and internal mass transfer in porous ion-exchange catalysts: Green synthesis of peroxycarboxylic acids
  114. Application of linear free-energy relationships to perhydrolysis of different carboxylic acids over homogeneous and heterogeneous catalysts
  115. Synthesis of peroxypropionic acid from propionic acid and hydrogen peroxide over heterogeneous catalysts
  116. Kinetic Study and Modeling of Peroxypropionic Acid Synthesis from Propionic Acid and Hydrogen Peroxide Using Homogeneous Catalysts
  117. Kinetic study of decomposition of peroxypropionic acid in liquid phase through direct analysis of decomposition products in gas phase