All Stories

  1. Near-eutectic Zn-Mg alloys: Interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties

    Article • Current Applied Physics, May 2019, Elsevier

    Dr. Noé Cheung

  2. Transient directional solidification of a eutectic Al-Si-Ni alloy: macrostructure, microstructure, dendritic growth and hardness

    Article • Materialia, May 2019, Elsevier

    Dr. Noé Cheung

  3. Correlation between microstructure and corrosion behaviour of Bi-Zn solder alloys

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, April 2019, Taylor & Francis

    Juan de Damborenea, Dr. Noé Cheung

  4. Sn-0.5Cu(-x)Al Solder Alloys: Microstructure-Related Aspects and Tensile Properties Responses

    Article • Metals, February 2019, MDPI AG

    Dr. Noé Cheung

  5. Thermal analysis during solidification of an Al–Cu eutectic alloy: interrelation of thermal parameters, microstructure and hardness

    Article • Journal of Thermal Analysis and Calorimetry, January 2019, Springer Science + Business Media

    Dr. Noé Cheung

  6. Hypoeutectic Al–Fe Alloys: Formation and Characterization of Intermetallics by Dissolution of the Al Matrix

    Article • January 2019, Taylor & Francis

    Dr. Noé Cheung

  7. An artificial immune system algorithm applied to the solution of an inverse problem in unsteady inward solidification

    Article • Advances in Engineering Software, July 2018, Elsevier

    Dr. Noé Cheung

  8. Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidified Al–Cu–Ni Alloys

    Article • Metals and Materials International, March 2018, Springer Science + Business Media

    Dr. Noé Cheung

  9. A comparative analysis of microstructural features, tensile properties and wettability of hypoperitectic and peritectic Sn-Sb solder alloys

    Article • Microelectronics Reliability, February 2018, Elsevier

    Dr. Noé Cheung

  10. Relationship between spacing of eutectic colonies and tensile properties of transient directionally solidified Al-Ni eutectic alloy

    Article • Journal of Alloys and Compounds, February 2018, Elsevier

    Dr. Noé Cheung

  11. Microstructure characterization of a directionally solidified Mg-12wt.%Zn alloy: Equiaxed dendrites, eutectic mixture and type/ morphology of intermetallics

    Article • Materials Chemistry and Physics, January 2018, Elsevier

    Dr. Noé Cheung

  12. Directionally solidified dilute Zn-Mg alloys: Correlation between microstructure and corrosion properties

    Article • Journal of Alloys and Compounds, November 2017, Elsevier

    Juan de Damborenea, Dr. Noé Cheung

  13. Interrelationship of thermal parameters, microstructure and microhardness of directionally solidified Bi–Zn solder alloys

    Article • Microelectronics Reliability, November 2017, Elsevier

    Dr. Noé Cheung

  14. Directional solidification of a Sn-0.2Ni solder alloy in water-cooled copper and steel molds: Related effects on the matrix micromorphology, nature of intermetallics and tensile properties

    Article • Journal of Alloys and Compounds, November 2017, Elsevier

    Dr. Noé Cheung

  15. The effects of Zn segregation and microstructure length scale on the corrosion behavior of a directionally solidified Mg-25 wt.%Zn alloy

    Article • Journal of Alloys and Compounds, November 2017, Elsevier

    Dr. Noé Cheung

  16. Tailoring Morphology and Size of Microstructure and Tensile Properties of Sn-5.5 wt.%Sb-1 wt.%(Cu,Ag) Solder Alloys

    Article • Journal of Electronic Materials, October 2017, Springer Science + Business Media

    Dr. Noé Cheung

  17. Electrochemical Corrosion Behavior of as-cast Zn-rich Zn-Mg Alloys in a 0.06M NaCl Solution

    Article • International Journal of Electrochemical Science, June 2017, ESG

    Dr. Noé Cheung

  18. Microstructure, tensile properties and wear resistance correlations on directionally solidified Al-Sn-(Cu; Si) alloys

    Article • Journal of Alloys and Compounds, February 2017, Elsevier

    Juan de Damborenea, Dr. Noé Cheung

  19. Tensile properties and related microstructural aspects of hypereutectic Al-Si alloys directionally solidified under different melt superheats and transient heat flow conditions

    Article • Materials Science and Engineering A, February 2017, Elsevier

    Dr. Noé Cheung

  20. Upward and downward unsteady-state directional solidification of a hypoeutectic Al-3wt.%Mg alloy

    Article • Ciência & Tecnologia dos Materiais, January 2017, Elsevier

    Dr. Noé Cheung

  21. An alternative thermal approach to evaluate the wettability of solder alloys

    Article • Applied Thermal Engineering, August 2016, Elsevier

    Dr. Noé Cheung

  22. Evaluation of thermophysical properties of Al–Sn–Si alloys based on computational thermodynamics and validation by numerical and experimental simulation of solidification

    Article • The Journal of Chemical Thermodynamics, July 2016, Elsevier

    Dr. Noé Cheung

  23. Cellular/dendritic arrays and intermetallic phases affecting corrosion and mechanical resistances of an Al–Mg–Si alloy

    Article • Journal of Alloys and Compounds, July 2016, Elsevier

    Dr. Noé Cheung

  24. Cooling thermal parameters, microstructural spacing and mechanical properties in a directionally solidified hypereutectic Al–Si alloy

    Article • Philosophical Magazine Letters, June 2016, Taylor & Francis

    Dr. Noé Cheung

  25. Thermal Parameters and Microstructural Development in Directionally Solidified Zn-Rich Zn-Mg Alloys

    Article • Metallurgical and Materials Transactions A, April 2016, Springer Science + Business Media

    Juan de Damborenea, Dr. Noé Cheung

  26. Numerical and experimental modelling of two-dimensional unsteady heat transfer during inward solidification of square billets

    Article • Applied Thermal Engineering, March 2016, Elsevier

    Dr. Noé Cheung

  27. Interconnection of Zn content, macrosegregation, dendritic growth, nature of intermetallics and hardness in directionally solidified Mg–Zn alloys

    Article • Journal of Alloys and Compounds, March 2016, Elsevier

    Dr. Noé Cheung

  28. Length scale of the dendritic microstructure affecting tensile properties of Al–(Ag)–(Cu) alloys

    Article • International Journal of Modern Physics B, January 2016, World Scientific Pub Co Pte Lt

    Dr. Noé Cheung

  29. Solder/substrate interfacial thermal conductance and wetting angles of Bi–Ag solder alloys

    Article • Journal of Materials Science Materials in Electronics, October 2015, Springer Science + Business Media

    Dr. Noé Cheung

  30. Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn–Sb lead-free solder alloys

    Article • Materials Characterization, August 2015, Elsevier

    Dr. Noé Cheung

  31. High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al–Mg–Si alloy

    Article • Journal of Alloys and Compounds, July 2015, Elsevier

    Dr. Noé Cheung

  32. Erratum to: Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys

    Article • Metallurgical and Materials Transactions A, June 2015, Springer Science + Business Media

    Dr. Noé Cheung

  33. Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys

    Article • Metallurgical and Materials Transactions A, May 2015, Springer Science + Business Media

    Dr. Noé Cheung

  34. Cooling thermal parameters, microstructure, segregation and hardness in directionally solidified Al–Sn-(Si;Cu) alloys

    Article • Materials & Design (1980-2015), May 2015, Elsevier

    Dr. Noé Cheung

  35. Sn–0.7wt%Cu–(xNi) alloys: Microstructure–mechanical properties correlations with solder/substrate interfacial heat transfer coefficient

    Article • Journal of Alloys and Compounds, May 2015, Elsevier

    Dr. Noé Cheung

  36. Evaluation of solder/substrate thermal conductance and wetting angle of Sn–0.7wt%Cu–(0–0.1wt%Ni) solder alloys

    Article • Materials Letters, March 2015, Elsevier

    Dr. Noé Cheung

  37. Experimental and numerical analyses of laser remelted Sn–0.7 wt%Cu solder surfaces

    Article • Journal of Materials Science Materials in Electronics, February 2015, Springer Science + Business Media

    Dr. Noé Cheung

  38. The use of a directional solidification technique to investigate the interrelationship of thermal parameters, microstructure and microhardness of Bi–Ag solder alloys

    Article • Materials Characterization, October 2014, Elsevier

    Dr. Noé Cheung

  39. An Effective Inverse Heat Transfer Procedure Based on Evolutionary Algorithms to Determine Cooling Conditions of a Steel Continuous Casting Machine

    Article • Materials and Manufacturing Processes, September 2014, Taylor & Francis

    Dr. Noé Cheung

  40. Steady and unsteady state peritectic solidification

    Article • Materials Science and Technology, July 2014, Taylor & Francis

    Dr. Noé Cheung

  41. Inward solidification of cylinders: Reversal in the growth rate and microstructure evolution

    Article • Applied Thermal Engineering, November 2013, Elsevier

    Dr. Noé Cheung

  42. Zone Refining of Tin: Optimization of Zone Length by a Genetic Algorithm

    Article • Materials and Manufacturing Processes, July 2013, Taylor & Francis

    Dr. Noé Cheung

  43. The effect of the growth rate on microsegregation: Experimental investigation in hypoeutectic Al–Fe and Al–Cu alloys directionally solidified

    Article • Journal of Alloys and Compounds, June 2013, Elsevier

    Dr. Noé Cheung

  44. Microstructure and Mechanical Properties of Directionally Solidified Unmodified and Ni-Modified Sn-0.7wt%Cu Lead-Free Solder Alloy

    Article • Defect and Diffusion Forum, January 2013, Trans Tech Publications

    Dr. Noé Cheung

  45. Assessment of Cooling Conditions of a Continuous Casting Machine for Steel Billets Based on Surface Temperature Measurements

    Article • Materials Science Forum, November 2012, Trans Tech Publications

    Dr. Noé Cheung

  46. Effect of Mold Surface Roughness on the Interfacial Heat Transfer Coefficient During Solidification of Solder Alloys

    Article • Materials Science Forum, November 2012, Trans Tech Publications

    Dr. Noé Cheung

  47. Heat Transfer Characteristics of Inward, Outward and Upward Solidification of an Al-1.5wt%Fe Alloy in Cylindrical Chill Molds

    Article • Materials Science Forum, November 2012, Trans Tech Publications

    Dr. Noé Cheung

  48. Unsteady-State Directional Solidification of a Hypoperitectic Pb-9.5wt%Bi Alloy

    Article • Materials Science Forum, November 2012, Trans Tech Publications

    Dr. Noé Cheung

  49. Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni

    Article • Journal of Electronic Materials, October 2012, Springer Science + Business Media

    Dr. Noé Cheung

  50. Inward and outward solidification of cylindrical castings: The role of the metal/mold heat transfer coefficient

    Article • Materials Chemistry and Physics, October 2012, Elsevier

    Dr. Noé Cheung

  51. Cellular to dendritic transition during transient solidification of a eutectic Sn–0.7wt%Cu solder alloy

    Article • Materials Chemistry and Physics, January 2012, Elsevier

    Dr. Noé Cheung

  52. Design of mechanical properties of Al-alloys chill castings based on the metal/mold interfacial heat transfer coefficient

    Article • International Journal of Thermal Sciences, January 2012, Elsevier

    Dr. Noé Cheung

  53. On array models theoretical predictions versus measurements for the growth of cells and dendrites in the transient solidification of binary alloys

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, April 2011, Taylor & Francis

    Dr. Noé Cheung

  54. Application of a Genetic Algorithm to Optimize Purification in the Zone Refining Process

    Article • Materials and Manufacturing Processes, April 2011, Taylor & Francis

    Dr. Noé Cheung

  55. Laser remelting of Al–1.5wt%Fe alloy surfaces: Numerical and experimental analyses

    Article • Optics and Lasers in Engineering, April 2011, Elsevier

    Dr. Noé Cheung

  56. Influence of Solidification Microstructure on the Wear Resistance of Al-Si and Al-Sn Alloys Directionally Solidified under Unsteady State Conditions.

    Article • February 2011, Wiley

    Dr. Noé Cheung

  57. Al–Fe hypoeutectic alloys directionally solidified under steady-state and unsteady-state conditions

    Article • Journal of Alloys and Compounds, August 2010, Elsevier

    Dr. Noé Cheung

  58. The correlation between dendritic microstructure and mechanical properties of directionally solidified hypoeutectic Al-Ni alloys

    Article • Metals and Materials International, February 2010, Springer Science + Business Media

    Dr. Noé Cheung

  59. Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 304 Stainless Steel Samples

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr Milton SF LIMA, Dr. Noé Cheung

  60. Numerical and experimental analysis of rapidly solidified laser remelted Al 5wt pct Ni surfaces

    Article • International Journal of Microstructure and Materials Properties, January 2010, Inderscience Publishers

    Dr. Noé Cheung

  61. Cellular Microstructure and Mechanical Properties of a Directionally Solidified Al-1.0wt%Fe Alloy

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr. Noé Cheung

  62. SEM Characterization of Al3Ni Intermetallics and its Influence on Mechanical Properties of Directionally Solidified Hypoeutectic Al-Ni Alloys

    Article • Materials Science Forum, January 2010, Trans Tech Publications

    Dr. Noé Cheung

  63. The effects of cell spacing and distribution of intermetallic fibers on the mechanical properties of hypoeutectic Al–Fe alloys

    Article • Materials Chemistry and Physics, January 2010, Elsevier

    Dr. Noé Cheung

  64. Corrigendum to “Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys” [J. Alloys Compd. 470 (2009) 589–599]

    Article • Journal of Alloys and Compounds, November 2009, Elsevier

    Dr. Noé Cheung

  65. Melt characteristics and solidification growth direction with respect to gravity affecting the interfacial heat transfer coefficient of chill castings

    Article • Materials & Design (1980-2015), October 2009, Elsevier

    Dr. Noé Cheung

  66. Application of an Artificial Intelligence Technique to Improve Purification in the Zone Refining Process

    Article • Journal of Electronic Materials, September 2009, Springer Science + Business Media

    Dr. Noé Cheung

  67. Investigation of intermetallics in hypoeutectic Al–Fe alloys by dissolution of the Al matrix

    Article • Intermetallics, September 2009, Elsevier

    Dr. Noé Cheung

  68. Inverse segregation during transient directional solidification of an Al–Sn alloy: Numerical and experimental analysis

    Article • Materials Chemistry and Physics, May 2009, Elsevier

    Dr. Noé Cheung

  69. Cellular growth during transient directional solidification of hypoeutectic Al–Fe alloys

    Article • Journal of Alloys and Compounds, February 2009, Elsevier

    Dr. Noé Cheung

  70. Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster

    Article • International Journal of Heat and Mass Transfer, January 2009, Elsevier

    Dr. Noé Cheung

  71. Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 420 Stainless Steel Samples

    Article • December 2008, CrossRef Test Account

    Dr. Noé Cheung

  72. Microstructural development in Al–Sn alloys directionally solidified under transient heat flow conditions

    Article • Materials Chemistry and Physics, May 2008, Elsevier

    Dr. Noé Cheung

  73. Microstructural Development in Al-Ni Alloys Directionally Solidified under Unsteady-State Conditions

    Article • Metallurgical and Materials Transactions A, April 2008, Springer Science + Business Media

    Dr. Noé Cheung

  74. Experimental impurity segregation and numerical analysis based on variable solute distribution coefficients during multi-pass zone refining of aluminum

    Article • Journal of Crystal Growth, March 2008, Elsevier

    Dr. Noé Cheung

  75. Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al–9wt%Si casting alloy

    Article • Applied Surface Science, February 2008, Elsevier

    Dr. Noé Cheung

  76. Experimental analysis of the columnar-to-equiaxed transition in directionally solidified Al–Ni and Al–Sn alloys

    Article • Materials Letters, May 2007, Elsevier

    Dr. Noé Cheung

  77. The effects of a eutectic modifier on microstructure and surface corrosion behavior of Al-Si hypoeutectic alloys

    Article • Journal of Solid State Electrochemistry, March 2007, Springer Science + Business Media

    Dr. Noé Cheung

  78. Numerical and experimental analysis of an approach based on variable solute distribution coefficients during purification by zone refining

    Article • Separation and Purification Technology, January 2007, Elsevier

    Dr. Noé Cheung

  79. The effect of solidification thermal variables on surface quality of Al–Cu ingots

    Article • Journal of Alloys and Compounds, January 2007, Elsevier

    Dr. Noé Cheung

  80. Experimental investigation of factors affecting surface quality of Al–Cu alloys ingots

    Article • Materials Science and Engineering A, September 2006, Elsevier

    Dr. Noé Cheung

  81. The variation of the metal/mold heat transfer coefficient along the cross section of cylindrical shaped castings

    Article • Inverse Problems in Science and Engineering, July 2006, Taylor & Francis

    Dr. Noé Cheung

  82. Secondary dendrite arm spacing and solute redistribution effects on the corrosion resistance of Al–10wt% Sn and Al–20wt% Zn alloys

    Article • Materials Science and Engineering A, March 2006, Elsevier

    Dr. Noé Cheung

  83. Application of a heuristic search technique for the improvement of spray zones cooling conditions in continuously cast steel billets

    Article • Applied Mathematical Modelling, January 2006, Elsevier

    Dr. Noé Cheung

  84. Application of a Solidification Mathematical Model and a Genetic Algorithm in the Optimization of Strand Thermal Profile Along the Continuous Casting of Steel

    Article • Materials and Manufacturing Processes, May 2005, Taylor & Francis

    Dr. Noé Cheung

  85. Factors affecting solidification thermal variables along the cross-section of horizontal cylindrical ingots

    Article • Materials Science and Engineering A, April 2005, Elsevier

    Dr. Noé Cheung

  86. Influence of refining time on nonmetallic inclusions in a low-carbon, silicon-killed steel

    Article • Materials Characterization, December 2003, Elsevier

    Dr. Noé Cheung

  87. Microstructural and hardness investigation of an aluminum–copper alloy processed by laser surface melting

    Article • Materials Characterization, March 2003, Elsevier

    Dr. Noé Cheung

  88. The columnar to equiaxed transition during solidification of Sn–Pb alloys

    Article • Journal of Alloys and Compounds, March 2003, Elsevier

    Dr. Noé Cheung

  89. The use of a heuristic search technique for the optimization of quality of steel billets produced by continuous casting

    Article • Engineering Applications of Artificial Intelligence, April 2001, Elsevier

    Dr. Noé Cheung