All Stories

  1. A Study on Material Properties of Intermetallic Phases in a Multicomponent Hypereutectic Al-Si Alloy with the Use of Nanoindentation Testing

    Article • Materials, December 2020, MDPI AG

    Miroslaw Tupaj

  2. The use of concentrated heat stream to repair AlZn10Si8Mg alloy castings

    Article • MANUFACTURING TECHNOLOGY, September 2020, Jan Evangelista Purkyne University in Usti nad Labem

    Miroslaw Tupaj

  3. The Effect of Cooling Conditions on Martensite Transformation Temperature and Hardness of 15% Cr Chromium Cast Iron

    Article • Materials, June 2020, MDPI AG

    Miroslaw Tupaj

  4. Investigation of wear resistance of selected materials after slide burnishing process

    Article • Eksploatacja i Niezawodnosc - Maintenance and Reliability, June 2020, Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

    Miroslaw Tupaj

  5. Surface Remelting of Mold Inserts Made of NC11 Steel

    Article • Journal of Casting & Materials Engineering, March 2020, AGHU University of Science and Technology Press

    Miroslaw Tupaj

  6. THE EFFECT OF SURFACE TEXTURE OF STEEL DISC ON FRICTION AND FRETTING WEAR

    Article • Tribologia, August 2018, Index Copernicus

    Miroslaw Tupaj

  7. Cavitation Erosion of Nodular Cast Iron − Microstructural Effects

    Article • Archives of Foundry Engineering, December 2017, De Gruyter

    Miroslaw Tupaj

  8. An Assessment of Appropriateness of the Choice of Parameters for Refractory Stampings Fabrication Process

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  9. Determination of Unit Pressure Force in Material Volume in the Course of Refractory Stamping Press Moulding

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  10. The Effect of Carbides Orientation in NC11 Steel on Scratch Susceptibility of Die Inserts Used to Press Stampings for Refractory Shapes

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  11. The Effect of Cooling Rate on Properties of Intermetallic Phase in a Complex Al-Si Alloy

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  12. Usable Properties of AlSi7Mg Alloy after Sodium or Strontium Modification

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  13. On Degradation of Cast Iron Surface-Protective Paint Coat Joint

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  14. Coefficient of Friction of a Brake Disc-Brake Pad Friction Couple

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  15. The Effect of a Thin-Wall Casting Mould Cavity Filling Conditions on the Casting Surface Quality

    Article • Archives of Foundry Engineering, January 2016, De Gruyter

    Miroslaw Tupaj

  16. Combustion Engine Cylinder Liners Made of Al-Si Alloys

    Article • Archives of Foundry Engineering, January 2015, De Gruyter

    Miroslaw Tupaj

  17. Materials Used in the Automotive Industry

    Article • Archives of Foundry Engineering, January 2015, De Gruyter

    Miroslaw Tupaj

  18. Shaping the Microstructure of Cast Iron Automobile Cylinder Liners Aimed at Providing High Service Properties

    Article • Archives of Foundry Engineering, January 2015, De Gruyter

    Miroslaw Tupaj

  19. Determination of Eutectoid Transformation Temperatures in Ductile Cast Iron

    Article • Archives of Foundry Engineering, January 2015, De Gruyter

    Miroslaw Tupaj

  20. Geometry of Remeltings and Efficiency of the Surface Remelting Process Applied to Cobalt Alloy Castings

    Article • Archives of Foundry Engineering, January 2013, De Gruyter Open Sp. z o.o.

    Miroslaw Tupaj

  21. Examination of Cast Iron Material Properties by Means of the Nanoindentation Method

    Article • Archives of Foundry Engineering, December 2012, De Gruyter

    Miroslaw Tupaj

  22. Stress Rupture Test of MAR-M509 Alloy with Structure Refined by Rapid Resolidification

    Article • Archives of Foundry Engineering, December 2012, De Gruyter

    Miroslaw Tupaj

  23. Evaluation of ductile iron casting material quality using ultrasonic testing

    Article • Journal of Materials Processing Technology, August 2010, Elsevier

    Miroslaw Tupaj

  24. Quality Control by Means of Ultrasonic in the Production of Ductile Iron

    Article • ISIJ International, January 2010, Iron and Steel Institute of Japan

    Miroslaw Tupaj