All Stories

  1. Topography measurement methods evaluation for entire bending-fatigued fracture surfaces of specimens obtained by explosive welding

    Article • Measurement, January 2024, Elsevier

    Krzysztof Żak

  2. Modelling the Kerf Angle, Roughness and Waviness of the Surface of Inconel 718 in an Abrasive Water Jet Cutting Process

    Article • Materials, July 2023, MDPI AG

    Krzysztof Żak

  3. Performance evaluation of extruded polystyrene foam for aerospace engineering applications using frequency analyses

    Article • The International Journal of Advanced Manufacturing Technology, May 2023, Springer Science + Business Media

    Krzysztof Żak

  4. Fatigue fracture surface metrology of thin-walled tubular austenitic steel specimens after asynchronous loadings

    Article • Engineering Failure Analysis, August 2022, Elsevier

    Krzysztof Żak

  5. Fracture surface topography investigation and fatigue life assessment of notched austenitic steel specimens

    Article • Engineering Failure Analysis, May 2022, Elsevier

    Krzysztof Żak

  6. A brief note on monotonic and fatigue fracture events investigation of thin-walled tubular austenitic steel specimens via fracture surface topography analysis (FRASTA)

    Article • Engineering Failure Analysis, April 2022, Elsevier

    Krzysztof Żak

  7. High-Performance Face Milling of 42CrMo4 Steel: Influence of Entering Angle on the Measured Surface Roughness, Cutting Force and Vibration Amplitude

    Article • Materials, April 2021, MDPI AG

    Krzysztof Żak

  8. Technological and tribological aspects of milling-burnishing process of complex surfaces

    Article • Tribology International, March 2021, Elsevier

    Krzysztof Żak

  9. ENERGY-BASED CHARACTERIZATION OF PRECISION HARD MACHINING USING PARTIALLY WORN CBN CUTTING TOOLS

    Article • Journal of Machine Engineering, June 2019, Wroclaw Board of Scientific Technical Societies Federation NOT

    Krzysztof Żak

  10. Optimization of subtractive-transformative hybrid processes supported by the technological heredity concept

    Article • CIRP Annals, April 2019, Elsevier

    Krzysztof Żak

  11. Effects of extreme pressure and anti-wear additives on surface topography and tool wear during MQCL turning of AISI 1045 steel

    Article • Journal of Mechanical Science and Technology, April 2018, Springer Science + Business Media

    Krzysztof Żak

  12. Surface quality and topographic inspection of variable compliance part after precise turning

    Article • Applied Surface Science, March 2018, Elsevier

    Krzysztof Żak

  13. Influence of Machining Conditions on the Energy Consumption and Productivity in Finish Hard Turning

    Article • October 2017, Springer Science + Business Media

    Krzysztof Żak

  14. Metrological Aspects of Surface Topographies Produced by Different Machining Operations Regarding Their Potential Functionality

    Article • January 2017, De Gruyter

    Krzysztof Żak

  15. Characteristics of geometric structure of the surface after grinding

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Prof. Stanislaw Legutko, Krzysztof Żak

  16. Tool life of ceramic wedges during precise turning of tungsten

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Prof. Stanislaw Legutko, Krzysztof Żak

  17. High-Precision Machining of Hard Steel Parts Using Special Abrasive Operations

    Article • January 2017, Springer Science + Business Media

    Krzysztof Żak

  18. Cutting Mechanics and Surface Finish for Turning with Differently Shaped CBN Tools

    Article • January 2017, De Gruyter

    Krzysztof Żak

  19. Comparative assessment of the mechanical and electromagnetic surfaces of explosively clad Ti–steel plates after drilling process

    Article • Precision Engineering, January 2017, Elsevier

    Krzysztof Żak

  20. The use of fractal dimension to the identification of the similarity surface

    Article • Mechanik, December 2016, SIMP Redakcja Mechanik - Agenda Wydawnicza SIMP

    Krzysztof Żak

  21. Assessment of energy selected parameters stereometry cutting edge of CBN on the shaping surface after turning steel with high hardness

    Article • Mechanik, October 2016, SIMP Redakcja Mechanik - Agenda Wydawnicza SIMP

    Krzysztof Żak

  22. Analysis of geometric structure of the surface after sequential machining aluminum alloy

    Article • Mechanik, May 2016, SIMP Redakcja Mechanik - Agenda Wydawnicza SIMP

    Krzysztof Żak

  23. Investigation of Friction and Wear Mechanisms of TiAlV Coated Carbide Against Ti6Al4V Titanium Alloy Using Pin-On-Disc Tribometer

    Article • January 2016, De Gruyter

    Krzysztof Żak

  24. Comparison of precision hard turning and grinding operations in terms of the topographic analysis of machined surfaces

    Article • International Journal of Surface Science and Engineering, January 2016, Inderscience Publishers

    Krzysztof Żak

  25. Energy consumption characterization in precision hard machining using CBN cutting tools

    Article • The International Journal of Advanced Manufacturing Technology, November 2015, Springer Science + Business Media

    Krzysztof Żak

  26. Correlation Between Friction and Wear of Cubic Borone Nitride Cutting Tools in Precision Hard Machining

    Article • Journal of Manufacturing Science and Engineering, October 2015, ASME International

    Krzysztof Żak

  27. A study of the impact of blade wear on specific energy in precise turning of 16MnCrS5 steel (AISI 5115)

    Article • Mechanik, September 2015, SIMP Redakcja Mechanik - Agenda Wydawnicza SIMP

    Krzysztof Żak

  28. Characterization of surface textures generated on hardened steel parts in high-precision machining operations

    Article • The International Journal of Advanced Manufacturing Technology, January 2015, Springer Science + Business Media

    Krzysztof Żak

  29. 0601 Energy Balance in Precision Hard Machining with Worn CBN Cutting Tools

    Article • Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, January 2015, Japan Society of Mechanical Engineers

    Krzysztof Żak

  30. 2301 Numerical Simulation and Experimental Verification of Friction in Turning Inconel 718 Alloy

    Article • Proceedings of International Conference on Leading Edge Manufacturing in 21st century LEM21, January 2015, Japan Society of Mechanical Engineers

    Krzysztof Żak

  31. High-precision Finishing Hard Steel Surfaces Using Cutting, Abrasive and Burnishing Operations

    Article • Procedia Manufacturing, January 2015, Elsevier

    Krzysztof Żak

  32. Possibilities of the Generation of Hardened Steel Parts With Defined Topographic Characteristics of the Machined Surfaces

    Article • Journal of Manufacturing Science and Engineering, November 2014, ASME International

    Krzysztof Żak

  33. Determination of friction in metal cutting with tool wear and flank face effects

    Article • Wear, September 2014, Elsevier

    Krzysztof Żak

  34. Characterization of Surface Integrity Produced by Sequential Dry Hard Turning and Ball Burnishing Operations

    Article • Journal of Manufacturing Science and Engineering, April 2014, ASME International

    Krzysztof Żak

  35. Investigation of technological effects of ball burnishing after cryogenic turning of hard steel

    Article • Advances in Manufacturing Science and Technology, January 2014, De Gruyter

    Krzysztof Żak

  36. Comparison of Surface Textures Generated in Hard Turning and Grinding Operations

    Article • Procedia CIRP, January 2014, Elsevier

    Krzysztof Żak

  37. A new mechanistic friction model for the oblique cutting with tool wear effect

    Article • Tribology International, October 2013, Elsevier

    Krzysztof Żak

  38. Producing high quality hardened parts using sequential hard turning and ball burnishing operations

    Article • Precision Engineering, October 2013, Elsevier

    Krzysztof Żak

  39. Friction quantification in the oblique cutting with CBN chamfered tools

    Article • Wear, July 2013, Elsevier

    Krzysztof Żak

  40. Surface integrity generated by oblique machining of steel and iron parts

    Article • Journal of Materials Processing Technology, December 2012, Elsevier

    Krzysztof Żak

  41. Modification of surface finish produced by hard turning using superfinishing and burnishing operations

    Article • Journal of Materials Processing Technology, January 2012, Elsevier

    Krzysztof Żak

  42. Machinability of PF nodular cast iron with silicon nitride ceramic tools

    Article • International Journal of Machining and Machinability of Materials, January 2011, Inderscience Publishers

    Krzysztof Żak

  43. Machining performance of nodular iron with coated cutting tools

    Article • International Journal of Materials and Product Technology, January 2010, Inderscience Publishers

    Krzysztof Żak

  44. Machining performance of pearlitic–ferritic nodular cast iron with coated carbide and silicon nitride ceramic tools

    Article • International Journal of Machine Tools and Manufacture, February 2009, Elsevier

    Krzysztof Żak