All Stories

  1. Effect of activators on hybrid alkaline binder based on tungsten mining waste and ground granulated blast furnace slag
  2. Design of alkali-activated aluminium powder foamed materials for precursors with different particle sizes
  3. Influence of Pre-Saturation of Recycled Aggregates on Concrete Workability and Strength
  4. CO2 activated steel slag-based materials: A review
  5. Red clay brick and tungsten mining waste-based alkali-activated binder: Microstructural and mechanical properties
  6. Life cycle analysis of a new modular greening system
  7. Experimental test and analytical modeling of mechanical properties of graphene-oxide cement composites
  8. Study of an alkali-activated binder based on tungsten mining mud and brick powder waste
  9. Preparation Conditions for the Synthesis of Alkali-Activated Binders Using Tungsten Mining Waste
  10. Smart Textiles for Strengthening of Structures
  11. Thermal analysis of a new modular system for green walls
  12. Performance of Warm Mix Recycled Asphalt containing up to 100% RAP
  13. Development and optimisation of phase change material-impregnated lightweight aggregates for geopolymer composites made from aluminosilicate rich mud and milled glass powder
  14. Optimal behavior of responsive residential demand considering hybrid phase change materials
  15. Development of a semi-flexible heavy duty pavement surfacing incorporating recycled and waste aggregates – Preliminary study
  16. Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings
  17. Self-Monitoring Strengthening System Based on Carbon Fiber Laminate
  18. Effects of lactic and citric acid on early-age engineering properties of Portland/calcium aluminate blended cements
  19. Effect of metakaolin on the chloride ingress properties of concrete
  20. Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems
  21. Carbon Fiber Epoxy Composites for Both Strengthening and Health Monitoring of Structures
  22. Green wall systems: A review of their characteristics
  23. Validación de nuevos materiales cerámicos a partir de rocas de desecho de minería. Propiedades mecánicas
  24. Evaluation of the Mechanical and Environmental Behavior of Alkali-Activated Mortars Containing PU/EVA-Based Waste
  25. Evaluation of the Influence of PU/EVA Waste-Based Lightweight Aggregates on the Physical Properties of Alkali-Activated Mortars
  26. Strength development of alkali-activated fly ash produced with combined NaOH and Ca(OH) 2 activators
  27. Mix design and performance of warm-mix recycled asphalt
  28. Study of Geopolymeric Binders of Fly Ash/Metakaolin Mixtures Cured at Room Temperature
  29. Permeability properties of self-compacting concrete with coarse recycled aggregates
  30. Experimental study of an innovative element for passive cooling of buildings
  31. Reciclagem de agregados das minas da Panasqueira como revestimento refratário da fundição de metais
  32. Evaluation of dry mortar ratio as mix design parameter for steel fibre reinforced self compacting concrete
  33. Wireless sensor networks for temperature and humidity monitoring within concrete structures
  34. Effect of immersion in water partially alkali-activated materials obtained of tungsten mine waste mud
  35. Experimental study on hygrothermal behaviour of retrofit solutions applied to old building walls
  36. Mechanical Performance and Economic Evaluation of Warm Mix Recycling Asphalt
  37. Mineral Waste Geopolymeric Artificial Aggregates as Alternative Materials for Wastewater-Treatment Processes: Study of Structural Stability and pH Variation in Water
  38. The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components
  39. Heat recovery versus solar collection in a ventilated double window
  40. Investigating the Multiple Stress Creep Recovery bitumen characterisation test
  41. Potential for reuse of tungsten mining waste-rock in technical-artistic value added products
  42. Mix design considerations for warm mix recycled asphalt with bitumen emulsion
  43. Assessing low shear viscosity as the new bitumen Softening Point test
  44. Effect of acrylic fibres geometry on physical, mechanical and durability properties of cement mortars
  45. Performance of textile and building materials for a particular evaporative cooling purpose
  46. Physical and mechanical behaviour of recycled PET fibre reinforced mortar
  47. Modelling and simulation of a ventilated double window
  48. The Effect of Latex and Chitosan Biopolymer on Concrete Properties and Performance
  49. Evaluation of the Stability of Waste-Based Geopolymeric Artificial Aggregates for Wastewater Treatment Processes under Different Curing Conditions
  50. Durability and Environmental Performance of Alkali-Activated Tungsten Mine Waste Mud Mortars
  51. Real climate experimental study of two double window systems with preheating of ventilation air
  52. Influence of natural coarse aggregate size, mineralogy and water content on the permeability of structural concrete
  53. Tungsten mine waste geopolymeric binder: Preliminary hydration products investigations
  54. Utilization of mining wastes to produce geopolymer binders
  55. Investigations of tungsten mine waste geopolymeric binder: Strength and microstructure
  56. Investigations on mix design of tungsten mine waste geopolymeric binder
  57. Alkali-activated binders: A review
  58. Alkali-activated binders: A review. Part 2. About materials and binders manufacture
  59. Properties of tungsten mine waste geopolymeric binder
  60. Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substrate surface treatment
  61. Investigations about the effect of aggregates on strength and microstructure of geopolymeric mine waste mud binders
  62. Cinzas volantes álcali-ativadas com solução combinada de NaOH e Ca(OH)2
  63. Influence of physical and geometrical properties of granite and limestone aggregates on the durability of a C20/25 strength class concrete