All Stories

  1. OVEN: A deep learning framework for photovoltaic site identification
  2. OVEN: A Deep Learning Framework for Photovoltaic Site Identification
  3. Addressing Confidence in Modeling of Contrail Formation from E-Fuels in Aviation Using Large Eddy Simulation Parametrization
  4. Assisted site-dependent selection of the most suitable Airborne Wind Energy system via Fuzzy Analytic Network Process
  5. Combined passive and active flow control for fixed-wing micro air vehicles
  6. A Review on Crosswind Airborne Wind Energy Systems: Key Factors for a Design Choice
  7. Scavenging energy from aeroelastic vibrations for hybrid stall control in a fixed-wing micro aerial vehicle
  8. Passive control of dynamic stall in a H-Darrieus Vertical Axis Wind Turbine using blade leading-edge protuberances
  9. A Rotating Disk-Wing Operating at High Advance Ratio and Low Reynolds Number
  10. Use of Sustainable Fuels in Aviation—A Review
  11. Influence of Sustainable Aviation Fuels on the Formation of Contrails and Their Properties
  12. Flow-Driven Piezoelectric Energy Harvester on a Full-Span Wing for Micro-aerial-vehicle (MAV) Application
  13. Improving Linked-Lists Using Tree Search Algorithms for Neighbor Finding in Variable-Resolution Smoothed Particle Hydrodynamics
  14. A Fully Lagrangian Approach to Study the Flow Past Heaving Airfoils Placed in a Freestream
  15. Effects of Leading-Edge Separation on the Vibroacoustic Signature of a Heaving Airfoil at Low Mach Number
  16. From the Viridarium of Francisco de Mendoça to the Airship of Cypriano Jardim
  17. Numerical Simulations of Low-Reynolds-Number Flow Past Finite Wings with Leading-Edge Protuberances
  18. Power density ratio optimization of bimorph piezocomposite energy harvesters using a Multidisciplinary Design Feasible method
  19. An adaptive fully-Lagrangian meshless method for incompressible laminar flow airfoil studies
  20. Impact of alternative fuels on the operational and environmental performance of a small turbofan engine
  21. Using a fully-Lagrangian meshless method for the study of aerosol dispersion and deposition
  22. A two-dimensional Segmented Boundary Algorithm for complex moving solid boundaries in Smoothed Particle Hydrodynamics
  23. Portuguese Contribution to Early Airplane Design: The Industriousness of João Gouveia
  24. Dynamic flow-based particle splitting in smoothed particle hydrodynamics
  25. An innovative open boundary treatment for incompressible SPH
  26. Early-Stage Design Optimization of a Turbofan for Low NOx Emissions at Off-Design Operating Conditions
  27. Assessment of the Potential for Micro Energy Harvesting in a Fixed-Wing MAV Configuration
  28. A detailed study of lid-driven cavity flow at moderate Reynolds numbers using Incompressible SPH
  29. Father Bartholomeu Lourenço de Gusmão: a Charlatan or the First Practical Pioneer of Aeronautics in History
  30. Stereo PIV Measurements of Low-Aspect-Ratio Low-Reynolds-Number Wings with Sinusoidal Leading Edges for Improved Computational Modeling
  31. EFFECT OF THE LIQUID INJECTION ANGLE ON THE ATOMIZATION OF LIQUID JETS IN SUBSONIC CROSSFLOWS
  32. Low-Reynolds-Number Effects in Passive Stall Control Using Sinusoidal Leading Edges
  33. Flow and Combustion Characteristics of a Low-NOx Combustor Model for Gas Turbines
  34. Numerical Simulation of In-Vitro Dispersion and Deposition of Nanoparticles in Dry-Powder-Inhaler Aerosols
  35. On the role of the fluid effusivity in unsteady heat transfer between a boundary layer and a solid wall
  36. Experimental Investigation of a Novel Combustor Model for Gas Turbines
  37. Prediction of the Deposition of Dry Powder Aerosols
  38. Measurements of instantaneous heat transfer in a two-dimensional T-junction using a multi-thermocouple probe
  39. Steady Vortex Breakdown in Swirling Flow Inside a Closed Container: Numerical Simulations, PIV and LDV Measurements
  40. Kelvin-Helmholtz Instability Due to Slot Blowing in Laminar Boundary Layers
  41. An experimental study of heat transfer in a two-dimensional T-junction operating at a low momentum flux ratio
  42. A non-dimensional functional relationship for the fine particle fraction produced by dry powder inhalers
  43. A Virtual Apparatus for Design and Testing of New Drug Formulations and Devices for Inhalation Therapy
  44. Spray Characteristics of Angled Liquid Injection into Subsonic Crossflows
  45. An experimental investigation of fluid flow and wall temperature distributions in an automotive headlight
  46. Posters
  47. Transition prediction in infinite swept wings using Navier–Stokes computations and linear stability theory
  48. DPIV study of the effect of a gable roof on the flow structure around a surface-mounted cubic obstacle
  49. Sizing of powders in inhalers with an Aerosizer® according to a mixed experimental factorial design
  50. Turbulent flow around a surface-mounted obstacle using 2D-3C DPIV
  51. Rollup region of a turbulent trailing vortex issued from a blade with flow separation
  52. On the accuracy of a MJPEG-based digital image compression PIV-system
  53. Confined vortex breakdown generated by a rotating cone
  54. LDV Measurements of Confined Vortex Breakdown Generated by a Rotating Cone
  55. Experimental and Numerical Investigation of Flow Oscillations in a Rectangular Cavity
  56. Influence of impingement edge geometry on cavity flow oscillations
  57. Finite Volume Calculations of Self-Sustained Oscillations in a Grooved Channel
  58. Comparison of several open boundary numerical treatments for laminar recirculating flows