All Stories

  1. Numerical and experimental evaluation of maraging steel cellular topologies for ballistic panel design
  2. Improved vascular response to a novel polymeric blend PLLA/PLGA coronary scaffold material: preclinical study
  3. Research on the causes of erroneous forecast generated using the Chapman-Kolmogorov equations for the process of vehicle operation
  4. Endovascular structures of the basilar artery as forms of the basilar nonfusion spectrum
  5. Prediction of electricity production by small wind power using artificial neural networks
  6. The Influence of Bone Density on Stresses in the Periodontal Ligament During Orthodontic Movement—Finite Element Study on Innovative Model
  7. Narrowings of the Deep Cerebral Perforating Arteries Ostia: Geometry, Structure, and Clinical Implications
  8. The Impact of the Yeoh Model’s Variability in Contact on Knee Joint Mechanics
  9. Endovascular structures of the basilar artery: forms of the basilar nonfusion spectrum
  10. A genetic algorithm and particle swarm optimization for redundancy allocation problem in systems with limited number of non-cooperating repairmen
  11. Numerical modeling of blast-induced rock fragmentation in deep mining with 3D and 2D FEM method approaches
  12. Redundancy allocation problem in repairable k-out-of-n systems with cold, warm, and hot standby: A genetic algorithm for availability optimization
  13. Numerical studies of an axial flow cyclone with ongoing removal of separated dust by suction from the settling tank
  14. Numerical-experimental analysis of laser-welded small energy absorbers with direct impact Hopkinson method
  15. Assessing the behavior of a hybrid model of the knee with contact surrogate under parameter uncertainties
  16. A method for calculating the technical readiness of aviation refuelling vehicles
  17. Numerical studies of the energy absorption capacities and deformation mechanisms of 2D cellular topologies
  18. Numerical aspects of modeling flow through the cerebral artery system with multiple small perforators
  19. Quantitative assessment of muscle fatigue during rowing ergometer exercise using wavelet analysis of surface electromyography (sEMG)
  20. Reliability analysis and redundancy optimization of k-out-of-n systems with random variable k using continuous time Markov chain and Monte Carlo simulation
  21. A Genetic Algorithm Approach for the Redundancy Allocation Problemin k-out-of-n Systems with Cold, Warm and Hot Standby
  22. A Genetic Algorithm and Particle Swarm Optimization for Redundancy Allocation Problem in Systems with Limited Number of Non-Cooperating Repairmen
  23. Copula-Based Reliability Analysis of Vehicles Based on Censored Failures Data Using Reliability Importance Measures
  24. Stochastic operation model for readiness assessment of small wind turbines based on Markov theory
  25. Basilar tip fenestration giving rise to Percheron’s and mesencephalic arteries
  26. Optimization programming tools supporting supply chain management
  27. Relationship between EMG and fNIRS during Dynamic Movements
  28. Semi-Markov approach for reliability modelling of light utility vehicles
  29. Comparison of selected blasting constitutive models for reproducing the dynamic fragmentation of rock
  30. Nash Equilibrium and Stackelberg Approach for Traffic Flow Optimization in Road Transportation Networks—A Case Study of Warsaw
  31. Modelling the Operation Process of Light Utility Vehicles in Transport Systems Using Monte Carlo Simulation and Semi-Markov Approach
  32. An innovative computational algorithm for modelling technical readiness coefficient: A case study in automotive industry
  33. Shock-induced fracture of dolomite rock in small-scale blast tests
  34. Mechanism of Spontaneous Intracerebral Hemorrhage Formation: An Anatomical Specimens-Based Study
  35. Correlation of Bone Material Model Using Voxel Mesh and Parametric Optimization
  36. Optimization of the Delivery Time within the Distribution Network, Taking into Account Fuel Consumption and the Level of Carbon Dioxide Emissions into the Atmosphere
  37. Analysis of Light Utility Vehicle Readiness in Military Transportation Systems Using Markov and Semi-Markov Processes
  38. Vascular Response Study of Novel Material Biodegradable-Polymer Scaffolds in the Porcine Coronary Restenosis Model: Insights Into Development of New Bioresorbable Scaffolds
  39. Study of rock fracture under blast loading
  40. Performance evaluation of multilayered ceramic composite armors: New design and advanced predictive method
  41. Investigation of dolomite’ rock brittle fracture using fully calibrated Karagozian Case Concrete model
  42. Reliability Analysis of Military Vehicles Based on Censored Failures Data
  43. CRT-600.01 Vascular Response Study of Novel Material Biodegradable-Polymer Scaffolds in the Porcine Coronary Restenosis Model: Insights Into Development of New Bioresorbable Scaffolds
  44. Simulation model for analysis and evaluation of selected measures of the helicopter’s readiness
  45. Method for Calculating the Required Number of Transport Vehicles Supplying Aviation Fuel to Aircraft during Combat Tasks
  46. An Innovative Algorithm of Monte Carlo Simulation Approach for Modelling the Operation Processes in Advanced Transport Systems and Industry
  47. Identification of muscle movements and activity by experimental methods for selected cases – stage #2
  48. Identification of muscle movements and activity by experimental methods for selected cases – stage#1
  49. Standard clinical computed tomography fails to precisely visualise presence, course and branching points of deep cerebral perforators
  50. Research of Vibrations of an Armoured Personnel Carrier Hull with FE Implementation
  51. Mathematical Programming and Solution Approaches for Transportation Optimisation in Supply Network
  52. Failure behavior of a concrete slab perforated by a deformable bullet
  53. Modelling of the Military Helicopter Operation Process in Terms of Readiness
  54. Assessment of the Impact of Decellularization Methods on Mechanical Properties of Biocomposites Used as Skin Substitute
  55. Method of creating 3D models of small caliber cerebral arteries basing on anatomical specimens
  56. An Energy Efficiency Estimation Procedure for Small Wind Turbines at Chosen Locations in Poland
  57. Use of Artificial Neural Networks to Predict Fuel Consumption on the Basis of Technical Parameters of Vehicles
  58. Dolomite fracture modeling using the Johnson-Holmquist concrete material model: Parameter determination and validation
  59. Impact of Disabled Driver’s Mass Center Location on Biomechanical Parameters during Crash
  60. Evaluation of the effect of muscle forces implementation on the behavior of a dummy during a head-on collision
  61. BVS stent optimisation based on a parametric model with a multistage validation process
  62. Development of Innovative Solutions for Intelligent Inspection of Products of Additive Manufacturing for Navy Supply
  63. Deformation Process of 3D Printed Structures Made from Flexible Material with Different Values of Relative Density
  64. Application of the Bloch-Schmigalla Method to Optimize the Organization of the Process of Repairing Unmanned Ground Vehicles
  65. Experimental testing and numerical simulations of blast-induced fracture of dolomite rock
  66. Fracture and fragmentation of dolomite rock using the JH-2 constitutive model: Parameter determination, experiments and simulations
  67. Local blast wave interaction with tire structure
  68. Determination and validation of Karagozian-Case Concrete constitutive model parameters for numerical modeling of dolomite rock
  69. Reliability Analysis of Technical Means of Transport
  70. Experimental Tests, FEM Constitutive Modeling and Validation of PLGA Bioresorbable Polymer for Stent Applications
  71. Experimental and numerical flow analysis through arteries with stent using particle image velocimetry and computational fluid dynamics method
  72. IMPLANTATION FEASIBILITY AND EARLY VASCULAR RESPONSE OF A NOVEL PLLA/PLGA BIORESORBABLE SCAFFOLD IN PORCINE CORONARY IN-STENT RESTENOSIS MODEL
  73. Numerical and experimental analysis of balloon angioplasty impact on flow hemodynamics improvement
  74. Application of the Transport Problem from the Criterion of Time to Optimize Supply Network with Products „Fast-Running”
  75. Modelling and testing of 3D printed cellular structures under quasi-static and dynamic conditions
  76. Destress Blasting of Rock Mass: Multiscale Modelling and Simulation
  77. A method of failure modeling for 3D printed cellular structures
  78. Static and Dynamic Loading Behavior of Ti6Al4V Honeycomb Structures Manufactured by Laser Engineered Net Shaping (LENSTM) Technology
  79. Identification of Mechanical Properties for Titanium Alloy Ti-6Al-4V Produced Using LENS Technology
  80. Comparison of SPH and FEM in thermomechanical coupled problems
  81. Deformation of honeycomb cellular structures manufactured with Laser Engineered Net Shaping (LENS) technology under quasi-static loading: Experimental testing and simulation
  82. Investigation on deformation process of cellular structures with gradient topology manufactured additively
  83. LENS Ti-6Al-4V alloy material properties determination for LS-Dyna package
  84. Modal Analyses of Small Wind Turbine
  85. Numerical Modelling of Cylindrical Test for Determining Jones – Wilkins - Lee Equation Parameters
  86. Evolutionary computing methodology for small wind turbine supporting structures
  87. Evaluation of the response of fibre reinforced composite repair of steel pipeline subjected to puncture from excavator tooth
  88. Modelling of guillotine cutting of multi-layered aluminum sheets
  89. Influence of Elevated Temperature During Crimping on Results of Numerical Simulation of a Bioresorbable Stent Deployment Process
  90. Numerical Analysis of the Blood Flow in an Artery with Stenosis
  91. The effects of types of guidewires and pressure applied during stent implantation in the main vessel on the incidence of damage to coronary guidewires during angioplasty of coronary bifurcation lesions-Wide Beast study
  92. Improved child-resistant system for better side impact protection
  93. Modelling, and characterization of 3D printed cellular structures
  94. Analysis of artery blood flow before and after angioplasty
  95. Correction to: Numerical prediction of the parameters of a yield criterion for fibrous compos-ites
  96. Methodology of shell structure reinforcement layout optimization
  97. Performance of steel pipe reinforced with composite sleave
  98. Possibilities of rock constitutive modelling and simulations
  99. Numerical Prediction of the Parameters of a Yield Criterion for Fibrous Composites
  100. Optimum design of a small wind turbine
  101. Parametric 3D FE model of coronary stent structure for radial force assessment
  102. Analysis of mechanics of side impact test defined in UN/ECE Regulation 129
  103. Interaction of Low-Frequency Guided Waves with Discontinuities
  104. Numerical analysis of crimping and inflation process of balloon‐expandable coronary stent using implicit solution
  105. Tire rubber testing procedure over a wide range of strain rates
  106. Experimental and numerical study of steel pipe with part-wall defect reinforced with fibre glass sleeve
  107. Airless Tire Conceptions Modeling and Simulations
  108. Numerical Analysis of Guyed Mast for Small Wind Turbine at Normal Operating Conditions
  109. Aero-elastic coupled numerical analysis of small wind turbine-generator modelling
  110. Numerical analysis of small wind turbine diffusor using fluid structure interaction
  111. Numerical optimization and design study of small wind turbine mast structure
  112. Detailed tyre FE modelling with multistage validation for dynamic analysis
  113. Numerical and experimental failure analysis of rifle extractor
  114. Experimental and Numerical Testing of Gas Pipeline Subjected to Excavator Elements Interference
  115. Numerical and experimental testing of vehicle tyre under impulse loading conditions
  116. Modeling of abrasive wear by the meshless smoothed particle hydrodynamics method
  117. Numerical Analysis of Child Restraint System Equipped with Built-in Belts Pretensioner During Frontal Impact
  118. Numerical analysis of stent expansion process in coronary artery stenosis with the use of non-compliant balloon
  119. Numerical Simulation of Abrasive Wear Using FEM—SPH Hybrid Approach
  120. Numerical Simulation of Ultrasonic Torsional Guided Wave Propagation for Pipes with Defects
  121. Optimization of protective panel for critical supporting elements
  122. Blast loading influence on load carrying capacity of I-column
  123. Numerical Study of Modular 5.56 mm Standard Assault Rifle Referring to Dynamic Characteristics
  124. Investigation of parameters influencing the efficiency of small wind turbines
  125. Modern small wind turbine design solutions comparison in terms of estimated cost to energy output ratio
  126. Dynamic behaviour of Various Fibre Systems During Impact Interaction – Numerical Approach
  127. Multibody rigid models and 3D FE models in numerical analysis of transport aircraft main landing gear
  128. A child seat numerical model validation in the static and dynamic work conditions
  129. Numerical study of selected military vehicle chassis subjected to blast loading in terms of tire strength improving
  130. Investigation of the Stress-Strain State of Seamless Pipe in the Initial State
  131. Field test and numerical studies of the scissors-AVLB type bridge
  132. SPLIT HOPKINSON PRESSURE BAR IMPULSE EXPERIMENTAL MEASUREMENT WITH NUMERICAL VALIDATION
  133. Thermovision in the Validation Process of Numerical Simulation of Braking
  134. Load carrying capacity numerical study of I-beam pillar structure with blast protective panel
  135. NUMERICAL ASSESSMENT OF THE SELECTED SUPPORTING ELEMENT CARRYING CAPACITY OF CRITICAL INFRASTRUCTURE FACILITY / SZACOWANIE NUMERYCZNE NOŚNOŚCI WYBRANEGO ELEMENTU KONSTRUKCYJNEGO OBIEKTU INFRASTRUKTURY KRYTYCZNEJ
  136. Numerical study for determination of pulse shaping design variables in SHPB apparatus
  137. SAFETY OF CRITICAL INFRASTRUCTURES - CHOSEN MODELING STUDIES OF ENERGY INFRASTRUCTURE ELEMENTS / BEZPIECZEŃSTWO INFRASTRUKTURY KRYTYCZNEJ – WYBRANE BADANIA MODELOWE ELEMENTÓW INFRASTRUKTURY ENERGETYCZNEJ
  138. Rubber Structural Coupon Behaviour Study under Pressure Impulse
  139. DYNAMIC TESTING OF COPPER MATERIAL – NUMERICAL APPROACH
  140. IDENTIFICATION OF LAYERS DISTRIBUTION IN THE COMPOSITE COUPON USING FINITE ELEMENT METHOD AND THREE POINT BENDING TEST
  141. Thermal measurement of brake pad lining surfaces during the braking process
  142. Long lasting time outdoor atmospheric corrosion tests: electrochemical analysis
  143. Numerical Analysis of Vehicle Suspension System Response Subjected to Blast Wave
  144. Research of Elastomeric Protective Layers Subjected to Blast Wave
  145. Stress State Investigations for a Tube in the Contact Area With Rigid Saddle
  146. Experimental Evaluation of Dynamic Effects for a Selected Highway Bridge
  147. Finite element analysis of vehicle–bridge interaction
  148. Numerical Assessment of Pipe Effort in Large Deformed Areas
  149. Numerical and Experimental Research of Pipelines Safety Including Aspect of Protection From Terroristic Threat or Warfare Conditions
  150. Laboratory Scale Experimental Simulation of a Pipe Rested on a Saddle Supporting System for Verification of Numerical Modeling
  151. Computer Simulation of Pipeline Deformations on the Basis of Data From an Intelligent Caliper Inspection Tool
  152. Finite element simulation of vickers microindentation on alumina ceramics