All Stories

  1. Ionic hydrophobic deep eutectic solvents in developing air-assisted liquid-phase microextraction based on experimental design: Application to flame atomic absorption spectrometry determination of cobalt in liquid and solid samples
  2. A novel composite derived from carbonized hawthorn waste pulp/marble waste powder by ball milling: preparation, characterization, and usability as bifunctional adsorbent
  3. Quantification of tributyltin in seawater using triple isotope dilution gas chromatography–inductively coupled plasma mass spectrometry achieving high accuracy and complying with European Water Framework Directive limits
  4. Performance evaluation of leaching processes with and without ultrasound effect combined with reagent-assisted mechanochemical process for nickel recovery from Laterite: Process optimization and kinetic evaluation
  5. Dissolution kinetics of manganese during nickel recovery from high iron grade laterite by acid leaching combined NaOH-assisted mechanochemical technology
  6. The use of pomegranate seed activated by mechanochemical process as a novel adsorbent for the removal of anionic dyestuffs: response surface method approach
  7. Sorptive performance of marine algae (Ulva lactuca Linnaeus, 1753) with and without ultrasonic-assisted to remove Hg(II) ions from aqueous solutions: optimisation, equilibrium and kinetic evaluation
  8. Performance assessment and statistical modeling of modification and adsorptive properties of a lignocellulosic waste modified using reagent assisted mechanochemical process as a low-cost and high-performance method
  9. Simple and Green Heat-Induced Deep Eutectic Solvent Microextraction for Determination of Lead and Cadmium in Vegetable Samples by Flame Atomic Absorption Spectrometry: a Multivariate Study
  10. Optimising the influence of novel citric acid-assisted mechanochemical modification of corncob on Cu2+, Pb2+ and Zn2+ removal
  11. Cinnamon bark as low-cost and eco-friendly adsorbent for the removal of indigo carmine and malachite green dyestuffs
  12. Vortex assisted-ionic liquid dispersive liquid-liquid microextraction and spectrophotometric determination of quercetin in tea, honey, fruit juice and wine samples after optimization based on response surface methodology
  13. Comparison of regression and design models for biosorption process
  14. Optimization of Ultrasonication Process for the Degradation of Linear Alkyl Benzene Sulfonic Acid by Response Surface Methodology
  15. A novel reagent-assisted mechanochemical method for nickel recovery from lateritic ore
  16. Multivariate optimization for removal of some heavy metals using novel inorganic–organic hybrid and calcined materials
  17. Chemometric Evaluation of the Heavy Metal Contents in Surface Soils from the Dilovası Region (Kocaeli/Turkey)
  18. Removal of anionic surfactant sodium dodecyl sulfate from aqueous solutions by O 3 /UV/H 2 O 2 advanced oxidation process: Process optimization with response surface methodology approach
  19. Comparison of multiple regression analysis using dummy variables and a NARX network model: an example of a heavy metal adsorption process
  20. Selective nickel recovery from iron-rich solutions
  21. Removal of some heavy metals onto mechanically activated fly ash: Modeling approach for optimization, isotherms, kinetics and thermodynamics
  22. Fabrication and characterization of novel macroporous Jeffamine/diamino hexane cryogels for enhanced Cu(II) metal uptake: Optimization, isotherms, kinetics and thermodynamic studies
  23. New Inorganic–Organic Hybrid Materials and Their Oxides for Removal of Heavy Metal Ions: Response Surface Methodology Approach
  24. Drinking water quality control: control charts for turbidity and pH
  25. Wet Mechanochemical Processing of Celestine using (NH4)2CO3
  26. Application of Response Surface Methodology to Electrocoagulation Treatment of Hospital Wastewater
  27. A new Schiff base: Synthesis, characterization and optimization of metal ions-binding properties
  28. Response surface methodology approach to leaching of nickel laterite and evaluation of different analytical techniques used for the analysis of leached solutions
  29. Investigation of the effect of physical conditions of a coating bath on the corrosion behavior of zinc coating using response surface methodology
  30. Full Factorial Design Approach to Hg(II) Adsorption onto Hydrogels
  31. Geochemical and spectroscopic investigations of Cd and Pb sorption mechanisms on contrasting biochars: Engineering implications
  32. Use of response surface methodology for pretreatment of hospital wastewater by O3/UV and O3/UV/H2O2 processes
  33. Trace elements and nutrients adsorption onto nano-maghemite in a contaminated-soil solution: A geochemical/statistical approach
  34. Process modeling and thermodynamics and kinetics evaluation of Basic Yellow 28 adsorption onto sepiolite
  35. Optimization of the Experimental Variables Influencing the Corrosion Rate of Aluminum Using Response Surface Methodology
  36. Evaluation of Copper Biosorption onto Date Palm (Phoenix dactylifera L.) Seeds with MLR and ANFIS Models
  37. Chemometric evaluation of the heavy metals distribution in waters from the Dilovası region in Kocaeli, Turkey
  38. Analysis of adsorption of reactive azo dye onto CuCl2 doped polyaniline using Box–Behnken design approach
  39. Removal of Lead (II) from Aqueous Solution on Multiwalled Carbon Nanotube by Using Response Surface Methodology
  40. Optimization of the Wet Mechanochemical Process Conditions of SrSO4 to SrCO3 and (NH4)2SO4 by Using Response Surface Methodology
  41. Comparison of the results of response surface methodology and artificial neural network for the biosorption of lead using black cumin
  42. Production of SrCO3 and (NH4)2SO4 by the dry mechanochemical processing of celestite
  43. Optimization of the solid phase extraction method for determination of Cu(ii) in natural waters by using response surface methodology
  44. Neural model for the leaching of celestite in sodium carbonate solution
  45. Brilliant Yellow dye adsorption onto sepiolite using a full factorial design
  46. Determination of trace elements in fly ash samples by FAAS after applying different digestion procedure
  47. Dissolution kinetics of malachite in ammonia/ammonium carbonate leaching
  48. Dissolution kinetics of malachite in sulphuric acid