All Stories

  1. Selective Ablation and Laser-Induced Periodical Surface Structures (LIPSS) Produced on (Ni/Ti) Nano Layer Thin Film with Ultra-Short Laser Pulses
  2. Laser ablation and LIPSS formation at static and dynamic multi-pulse regime on protective Al2O3/TiAlN coating
  3. SELECTIVE ABLATION OF Nb/Ti NANO COMPOSITE WITH SINGLE FEMTOSECOND LASER PULSES
  4. Comprehensive ablation study of near-IR femtosecond laser action on the titanium-based alloy Ti6Al4V: morphological effects and surface structures at low and high fluences
  5. The morphological and compositional changes of bimetallic Ti/Al thin film induced by ultra-short laser pulses
  6. Controllable ablative machining of Al/Ti and Ti/Al nano-layers on a Si substrate by single-pulse femtosecond laser irradiation
  7. Dependence of the Two-Photon Absorption Coefficient of Steel on the Pulse Duration During Its Ablation by Femto- and Picosecond Laser Pulses
  8. Microprocessing of a steel surface by single pulses of variable width
  9. Oxidation behaviour of composite CrN/(Cr,V)N coatings with different contents of vanadium induced by UV nanosecond laser pulses
  10. Single-shot selective femtosecond laser ablation of multi-layered Ti/Al and Ni/Ti films: “Cascaded” heat conduction and interfacial thermal effects
  11. Partial ablation of Ti/Al nano-layer thin film by single femtosecond laser pulse
  12. Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films
  13. Precise femtosecond laser crater fabrication in hard nanolayered AlTiN/TiN coating on steel substrate
  14. Surface nanopatterning of Al/Ti multilayer thin films and Al single layer by a low-fluence UV femtosecond laser beam
  15. Low and high repetition frequency femtosecond lasers processing of tungsten-based thin film
  16. Multipulse nanosecond laser modification of steel surface
  17. Femtosecond laser surface patterning of steel and titanium alloy
  18. Synthesis of ultra-thin oxide layer in laser-treated 3× (Al/Fe)/Si multilayer structure
  19. FORMATION OF MICROSTRUCTURES AND OXIDES ON STRUCTURAL STEEL BY NANOSECOND LASER IRRADIATION
  20. Laser-induced surface oxidation of (Ni/Ti)/Si system with picosecond laser pulses
  21. Femtosecond laser-induced periodic surface structure on the Ti-based nanolayered thin films
  22. Laser induced damage/ablation morphology on the 8(Al/Ti)/Si system in different ambient conditions
  23. Laser-induced structural and composition modification of multilayered Ni/Ti thin film in air and liquids
  24. Laser-induced surface alloying in nanosized Ni/Ti multilayer structures
  25. Titanium surface modification using femtosecond laser with 1013–1015 W/cm2 intensity in vacuum
  26. Laser treatment of nanocomposite Ni/Ti multilayer thin films in air
  27. Selective single pulse femtosecond laser removal of alumina (Al2O3) from a bilayered Al2O3/TiAlN/steel coating
  28. Formation of intermetallic phase in Ni/Ti multilayer structure by ion implantation and thermal annealing
  29. Evaluation of the composition and morphology of a WTi/Si system processed by a picosecond laser
  30. Surface modification of Ti-based nanocomposite multilayer structures by using laser beam irradiation
  31. Superficial changes on the Inconel 600 superalloy by picosecond Nd:YAG laser operating at 1064, 532, and 266 nm: Comparative study
  32. Surface modification of the titanium implant using TEA CO2 laser pulses in controllable gas atmospheres – Comparative study
  33. Femtosecond laser modification of multilayered TiAlN/TiN coating
  34. Surface texturing of the carbon steel AISI 1045 using femtosecond laser in single pulse and scanning regime
  35. Chemical and structural modifications of laser treated WTi surfaces at different ambient conditions
  36. Material surface modification by ns, ps and fs laser pulses
  37. Surface morphology modifications of titanium based implant induced by 40picosecond laser pulses at 266nm
  38. Effects of the pulse duration in laser modification of nano-sized WTi film on Si substrate
  39. Effects of thermal annealing on structural and electrical properties of sputtered W–Ti thin films
  40. Composition and structure modification of a WTi/Si system by short laser pulses
  41. Nickel-based super-alloy Inconel 600 morphological modifications by high repetition rate femtosecond Ti:sapphire laser
  42. Surface Modification of Metallic Targets with Ultrashort Laser Pulses
  43. Picosecond laser ablation of nano-sized WTi thin film
  44. Modifications of AISI 1045 steel by picosecond Nd:YAG laser at 266nm; comparison with 532 and 1064nm pulses
  45. Surface modifications of AISI 1045 steel created by high intensity 1064 and 532nm picosecond Nd:YAG laser pulses
  46. Surface modifications of Ti6Al4V by a picosecond Nd:YAG laser
  47. Micro- and nanosecond laser TiN coating/steel modification: Morphology studies
  48. Modification of multilayered TiAlN/TiN coating by nanosecond and picosecond laser pulses
  49. Nd:YAG laser interaction with titanium implant surfaces for medical applications
  50. Surface modification of a WTi thin film on Si substrate by nanosecond laser pulses
  51. Periodic surface structures on crystalline silicon created by 532nm picosecond Nd:YAG laser pulses
  52. Surface modifications of crystalline silicon created by high intensity 1064nm picosecond Nd:YAG laser pulses
  53. Surface modifications of TiN coatings by a pulsed TEA CO2 laser: Coating thickness effects
  54. Surface modification of titanium nitride film by a picosecond Nd:YAG laser
  55. Surface analysis of the nanostructured W–Ti thin film deposited on silicon
  56. Study of laser induced ablation with focused ion beam/scanning electron microscope devices
  57. Surface modifications of a titanium implant by a picosecond Nd:YAG laser operating at 1064 and 532nm
  58. Structure and morphology of nano-sized W-Ti/Si thin films
  59. Picoseconds-Laser Modification of Thin Films
  60. Surface modifications of TiN coating by pulsed TEA CO2 and XeCl lasers
  61. Surface Structures Formed on AISI 420 Stainless Steel by Pulsed Laser Irradiation
  62. Modification of thin metal and ceramic films by UV and IR laser radiation
  63. Surface modifications of TiN coating by the pulsed TEA CO2 and KrCl laser
  64. Pulsed TEA CO2 laser surface modifications of silicon
  65. TEA CO 2 laser surface modification of titanium ceramic thin films
  66. Efficient small-scale TEA CO 2 laser for material surface modification
  67. Surface modification of stainless steels by TEA CO2 laser
  68. Surface modification of W-Ti coatings induced by TEA CO2 laser beam
  69. Pulsed CO 2 laser ablation of polished steel and titanium nitride-coated steel
  70. Surface modification of TiN and (Ti,Al)N coatings by the TEA CO 2 laser
  71. TEA CO2 laser-induced damage of low-thickness TiN coatings
  72. Transversely excited atmospheric CO2 laser-induced damage of TiN and (Ti,Al)N coatings
  73. The effect of rapid thermal annealing on structural and electrical properties of TiB2 thin films
  74. Microtopography and interface width of sputter profiled Cr/Ni multilayered thin-film materials