Professor Alejandro J Müller

All Stories

1. 
   Polymer Physics Behind the Gel‐spinning of UHMWPE Fibers

   Article • Macromolecular Rapid Communications, April 2024, Wiley

   Professor Alejandro J Müller

2. 
   Composite nano-fibrillated cellulose-alginate hydrogels: Effect of chemical composition on 3D extrusion printing and drug release

   Article • Polymer, March 2024, Elsevier

   Professor Alejandro J Müller

3. 
   Morphology and confinement effects on crystallization kinetics in polyethylene containing block copolymers

   Article • Polymer, March 2024, Elsevier

   Professor Alejandro J Müller

4. 
   Cyclic and Linear Tetrablock Copolymers Synthesized at Speed and Scale by Lewis Pair Polymerization of a One-Pot (Meth)acrylic Mixture and Characterized at Multiple Levels

   Article • Journal of the American Chemical Society, February 2024, American Chemical Society (ACS)

   Professor Alejandro J Müller

5. 
   Towards a better understanding of the cosolvent effect on the low-temperature glycolysis of Polyethylene Terephthalate (PET)

   Article • Chemical Engineering Journal, February 2024, Elsevier

   Professor Alejandro J Müller

6. 
   Production of supertough and semiconductive PLA-based polymer blend nanocomposites by kinetic microstructural control

   Article • Polymer, February 2024, Elsevier

   Professor Alejandro J Müller

7. 
   Formulating PBS/PLA/PBAT blends for biodegradable, compostable packaging: The crucial roles of PBS content and reactive extrusion

   Article • Polymer Testing, February 2024, Elsevier

   Professor Alejandro J Müller

8. 
   All-Polymer Nanocomposite as Salt-Free Solid Electrolyte for Lithium Metal Batteries

   Article • ACS Polymers Au, January 2024, American Chemical Society (ACS)

   Professor Alejandro J Müller

9. 
   A novel approach for accurate determination of polyethylene and polypropylene content in polyolefin blends and recyclates by cross-fractionation chromatography

   Article • Polymer Testing, January 2024, Elsevier

   Professor Alejandro J Müller

10. 
    Crystallization kinetics of semiconducting poly(2,5-bis(3-alkylthiophen-2-yl)-thieno-[3,2-b]thiophene) (PBTTT) from its different liquid phases

    Article • Journal of Materials Chemistry C, January 2024, Royal Society of Chemistry

    Professor Alejandro J Müller

11. 
    Influence of chain topology on gel formation and direct ink printing of model linear and star block copolymers with poly(ethylene oxide) and poly(ε-caprolactone) semi-crystalline blocks

    Article • European Polymer Journal, December 2023, Elsevier

    Professor Alejandro J Müller

12. 
    Effect of the Miscibility between Grafted and Matrix Chains on the Dispersion and Crystallization of Polyethylene-Grafted Silica Nanocomposites

    Article • Macromolecules, November 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

13. 
    Synthesis and Crystallization of Waterborne Thiol–ene Polymers: Toward Innovative Oxygen Barrier Coatings

    Article • ACS Applied Polymer Materials, October 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

14. 
    Challenging Isodimorphism Concepts: Formation of Three Crystalline Phases in Poly(hexamethylene-ran-octamethylene carbonate) Copolymers

    Article • Macromolecules, October 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

15. 
    Tailoring the Nucleation and Crystallization Rate of Polyhydroxybutyrate by Copolymerization

    Article • Biomacromolecules, October 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

16. 
    Structure, morphology and crystallization of isodimorphic random copolymers: Copolyesters, copolycarbonates and copolyamides

    Article • Polymer, October 2023, Elsevier

    Professor Alejandro J Müller

17. 
    High‐Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

    Article • Macromolecular Materials and Engineering, September 2023, Wiley

    Professor Alejandro J Müller

18. 
    Disappearance of Melt Memory Effect with Comonomer Incorporation in Isodimorphic Random Copolyesters

    Article • Macromolecules, September 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

19. 
    Poly(lactic acid) Stereocomplexes based Molecular Architectures: Synthesis and Crystallization

    Article • Progress in Polymer Science, September 2023, Elsevier

    Professor Alejandro J Müller

20. 
    Tuning the crystallization and thermal properties of polyesters by introducing functional groups that induce intermolecular interactions

    Article • The Journal of Chemical Physics, August 2023, American Institute of Physics

    Professor Alejandro J Müller

21. 
    Robust and Transparent Polyamide 1012 Membranes for Biogas Purification Controlled by the Degree of Hydrogen Bonding Order

    Article • Macromolecules, August 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

22. 
    Cationically photocured epoxy/polycaprolactone materials processed by solution electrospinning, melt electrowriting and 3D printing: Morphology and shape memory properties

    Article • Polymer, August 2023, Elsevier

    Professor Alejandro J Müller

23. 
    How 4-(7-Octen-1-yl)-N,N-diphenylaniline co-units induce strong melt memory effects in isotactic polypropylene random copolymers

    Article • Polymer, August 2023, Elsevier

    Professor Alejandro J Müller

24. 
    Correction to Crystal Structure of Poly(7-heptalactone)

    Article • Macromolecules, July 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

25. 
    Surface-enhanced nucleation in immiscible polypropylene and polyethylene blends: The effect of polyethylene chain regularity

    Article • Polymer, July 2023, Elsevier

    Professor Alejandro J Müller

26. 
    Comonomer Inclusion in Single Crystals of Isodimorphic Random Copolymers of Butylene Succinate and ε-Caprolactone

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

27. 
    Synthesis, Morphology, and Crystallization Kinetics of Polyheptalactone (PHL)

    Article • Biomacromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

28. 
    Unraveling the Complex Polymorphic Crystallization Behavior of the Alternating Copolymer DMDS-alt-DVE

    Article • ACS Applied Polymer Materials, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

29. 
    Nanoparticle Diffusion in Miscible Polymer Nanocomposite Melts

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

30. 
    Effect of Molecular Weight on the Crystallization and Melt Memory of Poly(ε-caprolactone) (PCL)

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

31. 
    Crystal Structure of Poly(7-heptalactone)

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

32. 
    Influence of FFF Process Conditions on the Thermal, Mechanical, and Rheological Properties of Poly(hydroxybutyrate-co-hydroxy Hexanoate)

    Article • Polymers, April 2023, MDPI AG

    Professor Alejandro J Müller

33. 
    Polyethylene Oxide/Sodium Sulfonamide Polymethacrylate Blends as Highly Conducting Single-Ion Solid Polymer Electrolytes

    Article • Energy & Fuels, March 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

34. 
    Installing Controlled Stereo-Defects Yields Semicrystalline and Biodegradable Poly(3-Hydroxybutyrate) with High Toughness and Optical Clarity

    Article • Journal of the American Chemical Society, March 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

35. 
    Crystallization, morphology and self-assembly of double, triple and tetra crystalline block polymers

    Article • Polymer Testing, March 2023, Elsevier

    Professor Alejandro J Müller

36. 
    Nucleation Assisted through the Memory of a Polymer Melt: A Different Polymorph Emerging from the Melt of Another One

    Article • Macromolecules, February 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

37. 
    Supramolecular Networks Obtained by Block Copolymer Self-Assembly in a Polymer Matrix: Crystallization Behavior and Its Effect on the Mechanical Response

    Article • Macromolecules, February 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

38. 
    Structural evolution of poly(butylene succinate) crystals on heating with the formation of a dual lamellar population, as monitored by temperature-dependent WAXS/SAXS analysis

    Article • Polymer, January 2023, Elsevier

    Professor Alejandro J Müller

39. 
    The role of Eudragit® as a component of hydrogel formulations for medical devices

    Article • Journal of Materials Chemistry B, January 2023, Royal Society of Chemistry

    Professor Alejandro J Müller

40. 
    Crystallization-Driven Supramolecular Gelation of Poly(vinyl alcohol) by a Small Catechol Derivative

    Article • Macromolecules, December 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

41. 
    Thermal and mechanical characteristics of a glassy food model based on cassava starch

    Article • Applied Food Research, December 2022, Elsevier

    Professor Alejandro J Müller

42. 
    Unraveling the Influence of the Preexisting Molecular Order on the Crystallization of Semiconducting Semicrystalline Poly(9,9-di-n-octylfluorenyl-2,7-diyl (PFO)

    Article • Chemistry of Materials, November 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

43. 
    Effect of compatibilizer addition on the surface nucleation of dispersed polyethylene droplets in a self-nucleated polypropylene matrix

    Article • Polymer, November 2022, Elsevier

    Professor Alejandro J Müller

44. 
    Understanding polymer nucleation by studying droplets crystallization in immiscible polymer blends

    Article • Polymer, November 2022, Elsevier

    Professor Alejandro J Müller

45. 
    Thermal-Field-Tuned Heterogeneous Amorphous States of Poly(vinylidene fluoride) Films with Precise Transition from Nonpolar to Polar Phase

    Article • Macromolecules, October 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

46. 
    Characterization and Modification of Red Mud and Ferrosilicomanganese Fines and Their Application in the Synthesis of Hybrid Hydrogels

    Article • Polymers, October 2022, MDPI AG

    Professor Alejandro J Müller

47. 
    (PVDF)2(PEO)2 miktoarm star copolymers: Synthesis and isothermal crystallization leading to exclusive β-phase formation

    Article • European Polymer Journal, October 2022, Elsevier

    Professor Alejandro J Müller

48. 
    Fractionated Crystallization Behavior of Low-Molecular-Weight Polyethylene Grafted onto SiO2 Nanoparticles

    Article • ACS Applied Polymer Materials, September 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

49. 
    Effect of the TrFE Content on the Crystallization and SSA Thermal Fractionation of P(VDF-co-TrFE) Copolymers

    Article • International Journal of Molecular Sciences, September 2022, MDPI AG

    Professor Alejandro J Müller

50. 
    Crystallization Kinetics and Mechanical Properties of Miscible Polymer Blend Nanocomposites: Linear versus Grafted Systems

    Article • Macromolecules, September 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

51. 
    Large amplitude oscillatory shear (LAOS) behavior of chocolates of different compositions

    Article • Journal of Rheology, September 2022, Society of Rheology

    Professor Alejandro J Müller

52. 
    Supernucleation Dominates Lignin/Poly(ethylene oxide) Crystallization Kinetics

    Article • Macromolecules, August 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

53. 
    Effect of Initial Molecular Weight on the Structural Evolution of Polyamide 1012 during High-Temperature Thermal Treatments as Revealed by Successive Self-Nucleation and Annealing

    Article • Macromolecules, August 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

54. 
    Effect of Chain Stereoconfiguration on Poly(3-hydroxybutyrate) Crystallization Kinetics

    Article • Biomacromolecules, August 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

55. 
    Organizing Nanoparticles in Semicrystalline Polymers by Modifying Particle Diffusivity

    Article • ACS Macro Letters, June 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

56. 
    Natural Deep Eutectic Solvents Based on Choline Chloride and Phenolic Compounds as Efficient Bioadhesives and Corrosion Protectors

    Article • ACS Sustainable Chemistry & Engineering, June 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

57. 
    In Situ Atomic Force Microscopy Tracking of Nanoparticle Migration in Semicrystalline Polymers

    Article • ACS Macro Letters, June 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

58. 
    Crystallization Rate Minima of Poly(ethylene brassylate) at Temperatures Transitioning between Quantized Crystal Thicknesses

    Article • Macromolecules, May 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

59. 
    Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    Article • ACS Applied Polymer Materials, May 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

60. 
    Crystallization kinetics and nanoparticle ordering in semicrystalline polymer nanocomposites

    Article • Progress in Polymer Science, May 2022, Elsevier

    Professor Alejandro J Müller

61. 
    Fast successive self‐nucleation and annealing (SSA) thermal fractionation protocol for the characterization of polyolefin blends from mechanical recycling

    Article • Journal of Polymer Science, April 2022, Wiley

    Professor Alejandro J Müller

62. 
    The role of intermolecular interactions on melt memory and thermal fractionation of semicrystalline polymers

    Article • The Journal of Chemical Physics, April 2022, American Institute of Physics

    Professor Alejandro J Müller

63. 
    A Review on Current Strategies for the Modulation of Thermomechanical, Barrier, and Biodegradation Properties of Poly (Butylene Succinate) (PBS) and Its Random Copolymers

    Article • Polymers, March 2022, MDPI AG

    Professor Alejandro J Müller

64. 
    Surface Roughness Enhances Self-Nucleation of High-Density Polyethylene Droplets Dispersed within Immiscible Blends

    Article • Macromolecules, February 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

65. 
    Rheology and Tack Properties of Biodegradable Isodimorphic Poly(butylene succinate)-Ran-Poly(ε-caprolactone) Random Copolyesters and Their Potential Use as Adhesives

    Article • Polymers, February 2022, MDPI AG

    Professor Alejandro J Müller

66. 
    Self-assembly and crystallization of double crystalline aliphatic thermoplastic biopolyurethane and its nucleation with cellulose nanocrystals

    Article • Polymer, February 2022, Elsevier

    Professor Alejandro J Müller

67. 
    Enhanced and Reusable Poly(hydroxy urethane)-Based Low Temperature Hot-Melt Adhesives

    Article • ACS Polymers Au, January 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

68. 
    Unexpected Structural Properties in the Saturation Region of the Odd–Even Effects in Aliphatic Polyethers: Influence of Crystallization Conditions

    Article • Macromolecules, January 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

69. 
    Electroactive 3D printable poly(3,4-ethylenedioxythiophene)-graft-poly(ε-caprolactone) copolymers as scaffolds for muscle cell alignment

    Article • Polymer Chemistry, January 2022, Royal Society of Chemistry

    Professor Alejandro J Müller

70. 
    Competing crystallization of α- and β-phase induced by β-nucleating agents in microdroplets of isotactic polypropylene

    Article • CrystEngComm, January 2022, Royal Society of Chemistry

    Professor Alejandro J Müller

71. 
    Facile construction of functional poly(monothiocarbonate) copolymers under mild operating conditions

    Article • Polymer Chemistry, January 2022, Royal Society of Chemistry

    Professor Alejandro J Müller

72. 
    Miscibility, Morphology, and Crystallization Kinetics of Biodegradable Poly(ε-caprolactone)/Ascorbic Acid Blends

    Article • ACS Applied Polymer Materials, December 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

73. 
    Polycaprolactone Adsorption and Nucleation onto Graphite Nanoplates for Highly Flexible, Thermally Conductive, and Thermomechanically Stiff Nanopapers

    Article • ACS Applied Materials & Interfaces, December 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

74. 
    Ternary Poly(ethylene oxide)/Poly(l,l-lactide) PEO/PLA Blends as High-Temperature Solid Polymer Electrolytes for Lithium Batteries

    Article • ACS Applied Polymer Materials, November 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

75. 
    Mastering Superior Performance Origins of Ionic Polyurethane/Silica Hybrids

    Article • ACS Applied Polymer Materials, November 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

76. 
    Structure and Properties of Reactively Extruded Opaque Post-Consumer Recycled PET

    Article • Polymers, October 2021, MDPI AG

    Professor Alejandro J Müller

77. 
    Using Successive Self-Nucleation and Annealing to Detect the Solid–Solid Transitions in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)

    Article • Macromolecules, October 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

78. 
    Surface Nucleation of Dispersed Polyethylene Droplets in Immiscible Blends Revealed by Polypropylene Matrix Self-Nucleation

    Article • Macromolecules, September 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

79. 
    Crystallization and Morphology of Triple Crystalline Polyethylene-b-poly(ethylene oxide)-b-poly(ε-caprolactone) PE-b-PEO-b-PCL Triblock Terpolymers

    Article • Polymers, September 2021, MDPI AG

    Professor Alejandro J Müller

80. 
    Crystallization of a Self-Assembling Nucleator in Poly(l-lactide) Melt

    Article • Crystal Growth & Design, September 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

81. 
    Quantifying Nanoparticle Ordering Induced by Polymer Crystallization

    Article • ACS Nano, August 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

82. 
    Competition between Chain Extension and Crosslinking in Polyamide 1012 during High-Temperature Thermal Treatments as Revealed by Successive Self-Nucleation and Annealing Fractionation

    Article • Macromolecules, August 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

83. 
    Phase Transitions in Poly(vinylidene fluoride)/Polymethylene-Based Diblock Copolymers and Blends

    Article • Polymers, July 2021, MDPI AG

    Professor Alejandro J Müller

84. 
    Sequential Crystallization and Multicrystalline Morphology in PE-b-PEO-b-PCL-b-PLLA Tetrablock Quarterpolymers

    Article • Macromolecules, July 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

85. 
    Solid–Solid Crystal Transitions (δ to α) in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)

    Article • Macromolecules, July 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

86. 
    Confined Crystallization of Polymers within Nanopores

    Article • Accounts of Chemical Research, July 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

87. 
    Synthesis, Structure, Crystallization and Mechanical Properties of Isodimorphic PBS-ran-PCL Copolyesters

    Article • Polymers, July 2021, MDPI AG

    Professor Alejandro J Müller

88. 
    Polyether Single and Double Crystalline Blends and the Effect of Lithium Salt on Their Crystallinity and Ionic Conductivity

    Article • Polymers, June 2021, MDPI AG

    Professor Alejandro J Müller

89. 
    Continuous Cooling Curve Diagrams of Isotactic-Polypropylene/Polyethylene Blends: Mutual Nucleating Effects under Fast Cooling Conditions

    Article • Macromolecules, May 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

90. 
    Suppression of the Self-Nucleation Effect of Semicrystalline Polymers by Confinement

    Article • Macromolecules, April 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

91. 
    Revisiting Polymer–Particle Interaction in PEO Solutions

    Article • Langmuir, March 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

92. 
    Direct Relationship between Dispersion and Crystallization Behavior in Poly(ethylene oxide)/Poly(ethylene glycol)-g-Silica Nanocomposites

    Article • Macromolecules, February 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

93. 
    Access to Biorenewable and CO2-Based Polycarbonates from Exovinylene Cyclic Carbonates

    Article • ACS Sustainable Chemistry & Engineering, January 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

94. 
    Polymer Spherulitic Growth Kinetics Mediated by Nanoparticle Assemblies

    Article • Macromolecules, January 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

95. 
    Asymmetric Co-unit Inclusion in Statistical Copolyesters

    Article • Macromolecules, January 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

96. 
    Flame retardant polyphosphoester copolymers as solid polymer electrolyte for lithium batteries

    Article • Polymer Chemistry, January 2021, Royal Society of Chemistry

    Professor Alejandro J Müller

97. 
    Even–Odd Effect in Aliphatic Polycarbonates with Different Chain Lengths: from Poly (Hexamethylene Carbonate) to Poly (Dodecamethylene Carbonate)

    Article • Macromolecules, December 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

98. 
    Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid

    Article • Additive Manufacturing, December 2020, Elsevier

    Professor Alejandro J Müller

99. 
    Thermo-rheological effects on successful 3D printing of biodegradable polyesters

    Article • Additive Manufacturing, December 2020, Elsevier

    Professor Alejandro J Müller

100. 
     High trans-Selectivity in Boron-Catalyzed Polymerization of Allylic Arsonium Ylide and its Contribution to Thermal Properties of C3-Polymers

     Article • Macromolecules, December 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

101. 
     Melt Memory Effects in Poly(Butylene Succinate) Studied by Differential Fast Scanning Calorimetry

     Article • Polymers, November 2020, MDPI AG

     Professor Alejandro J Müller

102. 
     Polymer Crystallization under Confinement by Well-Dispersed Nanoparticles

     Article • Macromolecules, November 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

103. 
     Origin of Transcrystallinity and Nucleation Kinetics in Polybutene-1/Fiber Composites

     Article • Macromolecules, October 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

104. 
     The Effect of the Cooling Rate on the Morphology and Crystallization of Triple Crystalline PE-b-PEO-b-PLLA and PE-b-PCL-b-PLLA Triblock Terpolymers

     Article • ACS Applied Polymer Materials, October 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

105. 
     Renewable and Tough Poly(l-lactic acid)/Polyurethane Blends Prepared by Dynamic Vulcanization

     Article • ACS Omega, October 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

106. 
     Properties of scaffolds prepared by fused deposition modeling of poly(hydroxyalkanoates)

     Article • International Journal of Biological Macromolecules, October 2020, Elsevier

     Professor Alejandro J Müller

107. 
     Direct identification of three crystalline phases in PEO-b-PCL-b-PLLA triblock terpolymer by In situ hot-stage atomic force microscopy

     Article • Polymer, September 2020, Elsevier

     Professor Alejandro J Müller

108. 
     SSA fractionation of thermoplastic polyurethanes

     Article • Polymer Crystallization, August 2020, Hindawi Publishing Corporation

     Professor Alejandro J Müller, Ricardo Perez

109. 
     Nucleation modalities in poly(lactide), poly(butylene succinate), and poly(ε‐caprolactone) ternary blends with partial wetting morphology

     Article • Polymer Crystallization, August 2020, Hindawi Publishing Corporation

     Professor Alejandro J Müller

110. 
     A tailor-made Successive Self-nucleation and Annealing protocol for the characterization of recycled polyolefin blends

     Article • Polymer, August 2020, Elsevier

     Professor Alejandro J Müller

111. 
     Competition between nucleation and confinement in the crystallization of poly(ethylene glycol)/ large aspect ratio hectorite nanocomposites

     Article • Polymer, August 2020, Elsevier

     Professor Alejandro J Müller

112. 
     Editorial for the special issue “Novel aspects of polymer crystallization”

     Article • Polymer, August 2020, Elsevier

     Professor Alejandro J Müller

113. 
     Crystallization, Orientation, and Solid–Solid Crystal Transition of Polybutene-1 Confined within Nanoporous Alumina

     Article • Macromolecules, July 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

114. 
     Effect of Nanoconfinement on the Isodimorphic Crystallization of Poly(butylene succinate-ran-caprolactone) Random Copolymers

     Article • Macromolecules, July 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

115. 
     Heterogeneous Nucleation and Self-Nucleation of Isotactic Polypropylene Microdroplets in Immiscible Blends: From Nucleation to Growth-Dominated Crystallization

     Article • Macromolecules, July 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

116. 
     Effect of the Crystallization Conditions on the Exclusion/Inclusion Balance in Biodegradable Poly(butylene succinate-ran-butylene adipate) Copolymers

     Article • Biomacromolecules, July 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

117. 
     Mechanisms of Directional Polymer Crystallization

     Article • ACS Macro Letters, June 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

118. 
     Chemical Structure Drives Memory Effects in the Crystallization of Homopolymers

     Article • Macromolecules, June 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

119. 
     Partitioning of the components into two-demixed-macrophases from a solution blend emulating high impact polystyrene close to the phase inversion region

     Article • Polymer, June 2020, Elsevier

     Professor Alejandro J Müller

120. 
     Self-Nucleation Effects on Polymer Crystallization

     Article • Macromolecules, May 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

121. 
     High Lithium Conductivity of Miscible Poly(ethylene oxide)/Methacrylic Sulfonamide Anionic Polyelectrolyte Polymer Blends

     Article • Macromolecules, May 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

122. 
     Polymorphism and Multiple Melting Behavior of Bio-Based Poly(propylene 2,5-furandicarboxylate)

     Article • Biomacromolecules, April 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

123. 
     Interphase Design of Cellulose Nanocrystals/Poly(hydroxybutyrate-ran-valerate) Bionanocomposites for Mechanical and Thermal Properties Tuning

     Article • Biomacromolecules, March 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

124. 
     Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(ε-caprolactone)

     Article • Macromolecules, February 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

125. 
     Synthesis, Structure, and Crystallization Behavior of Amphiphilic Heteroarm Molecular Brushes with Crystallizable Poly(ethylene oxide) and n-Alkyl Side Chains

     Article • Macromolecules, February 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

126. 
     Fully Reversible Spherulitic Morphology in Cationically Photopolymerized DGEBA/PCL Shape-Memory Blends

     Article • Macromolecules, February 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

127. 
     Influence of Chemical Structures on Isodimorphic Behavior of Three Different Copolycarbonate Random Copolymer Series

     Article • Macromolecules, January 2020, American Chemical Society (ACS)

     Professor Alejandro J Müller

128. 
     ROP and crystallization behaviour of partially renewable triblock aromatic-aliphatic copolymers derived from L-lactide

     Article • European Polymer Journal, January 2020, Elsevier

     Professor Alejandro J Müller

129. 
     4-Miktoarm star architecture induces PVDF β-phase formation in (PVDF)2-b-(PEO)2 miktoarm star copolymers

     Article • Journal of Materials Chemistry C, January 2020, Royal Society of Chemistry

     Professor Alejandro J Müller

130. 
     Effect of Core Nanostructure on the Thermomechanical Properties of Soft Nanoparticles

     Article • Chemistry of Materials, December 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller, Bilen Emek Abali

131. 
     Controlling the Isothermal Crystallization of Isodimorphic PBS-ran-PCL Random Copolymers by Varying Composition and Supercooling

     Article • Polymers, December 2019, MDPI AG

     Professor Alejandro J Müller

132. 
     The origin of memory effects in the crystallization of polyamides: Role of hydrogen bonding

     Article • Polymer, December 2019, Elsevier

     Professor Alejandro J Müller

133. 
     Effects of Hairy Nanoparticles on Polymer Crystallization Kinetics

     Article • Macromolecules, November 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

134. 
     How Confinement Affects the Nucleation, Crystallization, and Dielectric Relaxation of Poly(butylene succinate) and Poly(butylene adipate) Infiltrated within Nanoporous Alumina Templates

     Article • Langmuir, November 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

135. 
     The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs

     Article • Polymers, October 2019, MDPI AG

     Professor Alejandro J Müller

136. 
     Nucleation and Crystallization of PA6 Composites Prepared by T-RTM: Effects of Carbon and Glass Fiber Loading

     Article • Polymers, October 2019, MDPI AG

     Professor Alejandro J Müller

137. 
     Tailoring the isothermal crystallization kinetics of isodimorphic poly (butylene succinate-ran-butylene azelate) random copolymers by changing composition

     Article • Polymer, October 2019, Elsevier

     Professor Alejandro J Müller

138. 
     Effect of shear rate and pressure on the crystallization of PP nanocomposites and PP/PET polymer blend nanocomposites

     Article • Polymer, October 2019, Elsevier

     Professor Alejandro J Müller

139. 
     Effects and limits of highly efficient nucleating agents in thermoplastic polyurethane

     Article • Polymer, October 2019, Elsevier

     Professor Alejandro J Müller

140. 
     Generating Triple Crystalline Superstructures in Melt Miscible PEO‐ b ‐PCL‐ b ‐PLLA Triblock Terpolymers by Controlling Thermal History and Sequential Crystallization

     Article • Macromolecular Chemistry and Physics, September 2019, Wiley

     Professor Alejandro J Müller

141. 
     Segmental Dynamics Govern the Cold Crystallization of Poly(lactic acid) in Nanoporous Alumina

     Article • Macromolecules, September 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

142. 
     Organocatalyzed Polymerization of PET-mb-poly(oxyhexane) Copolymers and Their Self-Assembly into Double Crystalline Superstructures

     Article • Macromolecules, August 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

143. 
     Crystallization Kinetics of Poly(ethylene oxide) under Confinement in Nanoporous Alumina Studied by in Situ X-ray Scattering and Simulation

     Article • Langmuir, August 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

144. 
     Nucleation of Poly(lactide) on the Surface of Different Fibers

     Article • Macromolecules, August 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

145. 
     Crystallization kinetics as a sensitive tool to detect degradation in poly(lactide)/poly(ε-caprolactone)/ PCL-co-PC copolymers blends

     Article • Polymer Degradation and Stability, August 2019, Elsevier

     Professor Alejandro J Müller

146. 
     The effect of composition on the rheological behavior of commercial chocolates

     Article • LWT, August 2019, Elsevier

     Professor Alejandro J Müller

147. 
     Elaboration and Characterization of Conductive Polymer Nanocomposites with Potential Use as Electrically Driven Membranes

     Article • Polymers, July 2019, MDPI AG

     Professor Alejandro J Müller

148. 
     Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends

     Article • Thermochimica Acta, July 2019, Elsevier

     Professor Alejandro J Müller

149. 
     Isomorphic Polyoxyalkylene Copolyethers Obtained by Copolymerization of Aliphatic Diols

     Article • Macromolecules, May 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

150. 
     PET-ran-PLA Partially Degradable Random Copolymers Prepared by Organocatalysis: Effect of Poly(l-lactic acid) Incorporation on Crystallization and Morphology

     Article • ACS Sustainable Chemistry & Engineering, April 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

151. 
     Isothermal Crystallization Kinetics and Morphology of Double Crystalline PCL/PBS Blends Mixed with a Polycarbonate/MWCNTs Masterbatch

     Article • Polymers, April 2019, MDPI AG

     Professor Alejandro J Müller

152. 
     Nanostructured hybrid fluids of amphiphilic diblock copolymers and surfactant worm-like micelles complexes

     Article • European Polymer Journal, April 2019, Elsevier

     Professor Alejandro J Müller

153. 
     Effect of Chemical Structure and Salt Concentration on the Crystallization and Ionic Conductivity of Aliphatic Polyethers

     Article • Polymers, March 2019, MDPI AG

     Professor Alejandro J Müller, Leire Meabe

154. 
     Influence of Chain Primary Structure and Topology (Branching) on Crystallization and Thermal Properties: The Case of Polysulfides

     Article • Macromolecules, February 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

155. 
     Synthesis of Aromatic–Aliphatic Polyesters by Enzymatic Ring Opening Polymerization of Cyclic Oligoesters and their Cyclodepolymerization for a Circular Economy

     Article • February 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

156. 
     Polyether Synthesis by Bulk Self-Condensation of Diols Catalyzed by Non-Eutectic Acid–Base Organocatalysts

     Article • ACS Sustainable Chemistry & Engineering, February 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

157. 
     Correlation between Grafting Density and Confined Crystallization Behavior of Poly(ethylene glycol) Grafted to Silica

     Article • Macromolecules, February 2019, American Chemical Society (ACS)

     Professor Alejandro J Müller

158. 
     How cyclic chain topology can reduce the crystallization rate of poly(3-hexylthiophene) and promote the formation of liquid crystalline phases in comparison with linear analogue chains

     Article • Journal of Materials Chemistry C, January 2019, Royal Society of Chemistry

     Professor Alejandro J Müller

159. 
     Effect of hydrogen bonding on the physicochemical and rheological features of chemically modified phenoxy

     Article • Polymer, December 2018, Elsevier

     Professor Alejandro J Müller

160. 
     Tuning the Thermal Properties and Morphology of Isodimorphic Poly[(butylene succinate)-ran-(ε-caprolactone)] Copolyesters by Changing Composition, Molecular Weight, and Thermal History

     Article • Macromolecules, November 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

161. 
     Uniaxial and Mixed Orientations of Poly(ethylene oxide) in Nanoporous Alumina Studied by X-ray Pole Figure Analysis

     Article • Macromolecules, November 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

162. 
     Influence of soft block crystallization on microstructural variation of double crystalline poly(ether-mb -amide) multiblock copolymers

     Article • Polymer Crystallization, October 2018, Wiley

     Prof. Xia Dong, Professor Alejandro J Müller

163. 
     Novel Biobased Polyamide 410/Polyamide 6/CNT Nanocomposites

     Article • Polymers, September 2018, MDPI AG

     Professor Alejandro J Müller

164. 
     Polyethylene terephthalate/low density polyethylene/titanium dioxide blend nanocomposites: Morphology, crystallinity, rheology, and transport properties

     Article • Journal of Applied Polymer Science, August 2018, Wiley

     Professor Alejandro J Müller

165. 
     Promotion of Self-Nucleation with Latent Form I Nuclei in Polybutene-1 and Its Copolymer

     Article • Macromolecules, August 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

166. 
     Special issue on Polymer Crystallization

     Article • European Polymer Journal, August 2018, Elsevier

     Professor Alejandro J Müller

167. 
     CO2 Selective PolyActive Membrane: Thermal Transitions and Gas Permeance as a Function of Thickness

     Article • ACS Applied Materials & Interfaces, July 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

168. 
     Thermal degradation of high-impact polystyrene with pro-oxidant additives

     Article • Polymer Bulletin, July 2018, Springer Science + Business Media

     Professor Alejandro J Müller

169. 
     Unexpected Synthesis of Segmented Poly(hydroxyurea–urethane)s from Dicyclic Carbonates and Diamines by Organocatalysis

     Article • Macromolecules, July 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

170. 
     Screening of different organocatalysts for the sustainable synthesis of PET

     Article • European Polymer Journal, July 2018, Elsevier

     Professor Alejandro J Müller

171. 
     Polymer crystallinity and crystallization kinetics via benchtop 1H NMR relaxometry: Revisited method, data analysis, and experiments on common polymers

     Article • Polymer, June 2018, Elsevier

     Professor Alejandro J Müller

172. 
     Differences between Isotropic and Self-Nucleated PCL Melts Detected by Dielectric Experiments

     Article • Macromolecules, May 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

173. 
     Differential scanning calorimetry study of cross-nucleation between polymorphs in isotactic poly(1-butene)

     Article • Polymer International, May 2018, Wiley

     Professor Alejandro J Müller

174. 
     Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(Butylene Succinate) Mixed with a Polycarbonate/MWCNT Masterbatch

     Article • Polymers, April 2018, MDPI AG

     Professor Alejandro J Müller

175. 
     Crystallization of isodimorphic aliphatic random copolyesters: Pseudo-eutectic behavior and double-crystalline materials

     Article • European Polymer Journal, April 2018, Elsevier

     Professor Alejandro J Müller

176. 
     Influence of Chain Topology (Cyclic versus Linear) on the Nucleation and Isothermal Crystallization of Poly(l-lactide) and Poly(d-lactide)

     Article • Macromolecules, February 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

177. 
     Interfacial nucleation in iPP/PB-1 blends promotes the formation of polybutene-1 trigonal crystals

     Article • Polymer, February 2018, Elsevier

     Professor Alejandro J Müller

178. 
     Crystallization kinetics of polylactide: Reactive plasticization and reprocessing effects

     Article • Polymer Degradation and Stability, February 2018, Elsevier

     Professor Alejandro J Müller

179. 
     Rheology of self-nucleated poly(ɛ-caprolactone) melts

     Article • European Polymer Journal, February 2018, Elsevier

     Professor Alejandro J Müller

180. 
     Reversible Lamellar Periodic Structures Induced by Sequential Crystallization/Melting in PBS-co-PCL Multiblock Copolymer

     Article • Macromolecules, January 2018, American Chemical Society (ACS)

     Professor Alejandro J Müller

181. 
     Synthesis and characterization of isocyanate-free polyureas

     Article • Green Chemistry, January 2018, Royal Society of Chemistry

     Professor Alejandro J Müller

182. 
     Organocatalysed depolymerisation of PET in a fully sustainable cycle using thermally stable protic ionic salt

     Article • Green Chemistry, January 2018, Royal Society of Chemistry

     Professor Alejandro J Müller

183. 
     Ion-macromolecule interactions studied with model polyurethanes

     Article • Journal of Colloid and Interface Science, January 2018, Elsevier

     Professor Alejandro J Müller

184. 
     Review on PCL, PBS, and PCL/PBS blends containing carbon nanotubes

     Article • eXPRESS Polymer Letters, January 2018, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

     Professor Alejandro J Müller

185. 
     Crystallization and Stereocomplexation of PLA-mb-PBS Multi-Block Copolymers

     Article • Polymers, December 2017, MDPI AG

     Professor Alejandro J Müller

186. 
     Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(ε-caprolactone) Mixed with a Polycarbonate/MWCNTs Masterbatch

     Article • Polymers, December 2017, MDPI AG

     Professor Alejandro J Müller

187. 
     Thermal and UV degradation of polypropylene with pro-oxidant. Abiotic characterization

     Article • Journal of Applied Polymer Science, December 2017, Wiley

     Professor Alejandro J Müller

188. 
     How the Complex Interplay between Different Blocks Determines the Isothermal Crystallization Kinetics of Triple-Crystalline PEO-b-PCL-b-PLLA Triblock Terpolymers

     Article • Macromolecules, December 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

189. 
     Crystallization behavior of precision polymers containing azobenzene defects

     Article • European Polymer Journal, December 2017, Elsevier

     Professor Alejandro J Müller

190. 
     Supernucleation and Orientation of Poly(butylene terephthalate) Crystals in Nanocomposites Containing Highly Reduced Graphene Oxide

     Article • Macromolecules, November 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

191. 
     Reexamining the Crystallization of Poly(ε-caprolactone) and Isotactic Polypropylene under Hard Confinement: Nucleation and Orientation

     Article • Macromolecules, November 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

192. 
     Crystallization kinetics of ethylene- co -propylene rubber/isotactic polypropylene blend investigated via chip-calorimeter measurement

     Article • European Polymer Journal, November 2017, Elsevier

     Professor Alejandro J Müller

193. 
     Poly(butylene succinate-ran-ε-caprolactone) copolyesters: Enzymatic synthesis and crystalline isodimorphic character

     Article • European Polymer Journal, October 2017, Elsevier

     Professor Alejandro J Müller

194. 
     Special Issue in: Organocatalyzed polymerizations

     Article • European Polymer Journal, October 2017, Elsevier

     Professor Alejandro J Müller

195. 
     Clarifying the Origin of Multiple Melting of Segmented Thermoplastic Polyurethanes by Fast Scanning Calorimetry

     Article • Macromolecules, September 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

196. 
     Trilayered Morphology of an ABC Triple Crystalline Triblock Terpolymer

     Article • Macromolecules, September 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

197. 
     Direct Relationship Between Interfacial Microstructure and Confined Crystallization in Poly(Ethylene Oxide)/Silica Composites: The Study of Polymer Molecular Weight Effects

     Article • Journal of Polymer Science Part B Polymer Physics, August 2017, Wiley

     Professor Alejandro J Müller

198. 
     Nucleating efficiency and thermal stability of industrial non-purified lignins and ultrafine talc in poly(lactic acid) (PLA)

     Article • Polymer Degradation and Stability, August 2017, Elsevier

     Professor Alejandro J Müller

199. 
     Competition between supernucleation and plasticization in the crystallization and rheological behavior of PCL/CNT-based nanocomposites and nanohybrids

     Article • Journal of Polymer Science Part B Polymer Physics, June 2017, Wiley

     Professor Alejandro J Müller, Maria Luisa Arnal

200. 
     Self-Associated Polyamide Alloys with Tailored Polymorphism Transition and Lamellar Thickening for Advanced Mechanical Application

     Article • ACS Applied Materials & Interfaces, May 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

201. 
     Polycondensation as a Versatile Synthetic Route to Aliphatic Polycarbonates for Solid Polymer Electrolytes

     Article • Electrochimica Acta, May 2017, Elsevier

     Leire Meabe, Professor Alejandro J Müller

202. 
     The effect of microstructural evolution during deformation on the post-yielding behavior of self-associated polyamide blends

     Article • Polymer, May 2017, Elsevier

     Professor Alejandro J Müller

203. 
     The effect of the solvent employed in the synthesis of hydrogels of poly (acrylamide-co-methyl methacrylate) on their structure, properties and possible biomedical applications

     Article • European Polymer Journal, March 2017, Elsevier

     Professor Alejandro J Müller

204. 
     The Complex Amorphous Phase in Poly(butylene succinate-ran-butylene azelate) Isodimorphic Copolyesters

     Article • Macromolecules, February 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

205. 
     Tailoring the Structure, Morphology, and Crystallization of Isodimorphic Poly(butylene succinate-ran-butylene adipate) Random Copolymers by Changing Composition and Thermal History

     Article • Macromolecules, January 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

206. 
     Thermorheologically Complex Self-Seeded Melts of Propylene–Ethylene Copolymers

     Article • Macromolecules, January 2017, American Chemical Society (ACS)

     Professor Alejandro J Müller

207. 
     Probing into the epitaxial crystallization of β form isotactic polypropylene: From experimental observations to molecular mechanics computation

     Article • Journal of Polymer Science Part B Polymer Physics, January 2017, Wiley

     Prof. Xia Dong, Professor Guoming Liu, Professor Alejandro J Müller

208. 
     Can poly(ε-caprolactone) crystals nucleate glassy polylactide?

     Article • CrystEngComm, January 2017, Royal Society of Chemistry

     Professor Alejandro J Müller

209. 
     Influence of composition on the isothermal crystallisation of segmented thermoplastic polyurethanes

     Article • CrystEngComm, January 2017, Royal Society of Chemistry

     Professor Alejandro J Müller

210. 
     Tailoring the properties of PP/PA6 nanostructured blends by the addition of nanosilica and compatibilizer agents

     Article • European Polymer Journal, December 2016, Elsevier

     Professor Alejandro J Müller

211. 
     Dielectric, mechanical and transport properties of bisphenol A polycarbonate/graphene nanocomposites prepared by melt blending

     Article • Journal of Applied Polymer Science, November 2016, Wiley

     Professor Alejandro J Müller

212. 
     Structural Transitions in Solution-Cast Films of a New AABB Type Thiophene Copolymer

     Article • Macromolecules, November 2016, American Chemical Society (ACS)

     Professor Alejandro J Müller

213. 
     Tailoring the Morphology and Melting Points of Segmented Thermoplastic Polyurethanes by Self-Nucleation

     Article • Macromolecules, October 2016, American Chemical Society (ACS)

     Professor Alejandro J Müller

214. 
     Linear and non-linear rheological behavior of polypropylene/polyamide blends modified with a compatibilizer agent and nanosilica and its relationship with the morphology

     Article • European Polymer Journal, October 2016, Elsevier

     Professor Alejandro J Müller

215. 
     Oil-based self-degradable gels as diverting agents for oil well operations

     Article • Journal of Petroleum Science and Engineering, October 2016, Elsevier

     Professor Alejandro J Müller

216. 
     The influence of paraffin wax addition on the isothermal crystallization of LLDPE

     Article • Journal of Applied Polymer Science, September 2016, Wiley

     Professor Alejandro J Müller

217. 
     Synthesis and Characterization of Double Crystalline Cyclic Diblock Copolymers of Poly(ε-caprolactone) and Poly(l(d)-lactide) (c(PCL-b- PL(D)LA))

     Article • Macromolecular Rapid Communications, August 2016, Wiley

     Professor Alejandro J Müller

218. 
     Application of SSA thermal fractionation and X-ray diffraction to elucidate comonomer inclusion or exclusion from the crystalline phases in poly(butylene succinate-ran-butylene azelate) random copolymers

     Article • Journal of Polymer Science Part B Polymer Physics, August 2016, Wiley

     Professor Alejandro J Müller

219. 
     Effect of sugar addition on glass transition temperatures of cassava starch with low to intermediate moisture contents

     Article • Carbohydrate Polymers, August 2016, Elsevier

     Professor Alejandro J Müller

220. 
     Introduction to the special issue on “Applications of synchrotron radiation in polymers science”

     Article • European Polymer Journal, August 2016, Elsevier

     Professor Alejandro J Müller

221. 
     New Double-Infiltration Methodology to Prepare PCL–PS Core–Shell Nanocylinders Inside Anodic Aluminum Oxide Templates

     Article • Langmuir, July 2016, American Chemical Society (ACS)

     Professor Alejandro J Müller

222. 
     Probing the early stages of thermal fractionation by successive self-nucleation and annealing performed with fast scanning chip-calorimetry

     Article • Journal of Polymer Science Part B Polymer Physics, July 2016, Wiley

     Professor Alejandro J Müller

223. 
     New habits in branched polyethylene single crystals

     Article • European Polymer Journal, July 2016, Elsevier

     Professor Alejandro J Müller

224. 
     Non-monotonic molecular weight dependence of crystallization rates of linear and cyclic poly(epsilon-caprolactone)s in a wide temperature range

     Article • Polymer International, June 2016, Wiley

     Professor Alejandro J Müller

225. 
     Hydrolytic degradation of nanocomposites based on poly(l-lactic acid) and layered double hydroxides modified with a model drug

     Article • Journal of Applied Polymer Science, April 2016, Wiley

     Professor Alejandro J Müller

226. 
     Hierarchically Diminishing Chirality Effects on Lamellar Assembly in Spherulites Comprising Chiral Polymers

     Article • Macromolecules, March 2016, American Chemical Society (ACS)

     Professor Alejandro J Müller

227. 
     Plasticization and cocrystallization in L LDPE /wax blends

     Article • Journal of Polymer Science Part B Polymer Physics, March 2016, Wiley

     Professor Alejandro J Müller

228. 
     Confined crystallization of polymeric materials

     Article • Progress in Polymer Science, March 2016, Elsevier

     Professor Alejandro J Müller

229. 
     Introduction to the “The effects of confinement on polymeric thermal transitions and nanostructuring” Special Volume

     Article • Progress in Polymer Science, March 2016, Elsevier

     Professor Alejandro J Müller

230. 
     The influence of concentration and pH on the structure and rheology of cationic surfactant/hydrotrope structured fluids

     Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, January 2016, Elsevier

     Professor Alejandro J Müller

231. 
     Interplay between poly(ethylene oxide) and poly(l-lactide) blocks during diblock copolymer crystallization

     Article • CrystEngComm, January 2016, Royal Society of Chemistry

     Professor Franck Meyer, Professor Alejandro J Müller

232. 
     Sequential crystallization and morphology of triple crystalline biodegradable PEO-b-PCL-b-PLLA triblock terpolymers

     Article • RSC Advances, January 2016, Royal Society of Chemistry

     Professor Alejandro J Müller

233. 
     The influence of small amounts of linear polycaprolactone chains on the crystallization of cyclic analogue molecules

     Article • RSC Advances, January 2016, Royal Society of Chemistry

     Professor Alejandro J Müller

234. 
     Plasticization and anti-plasticization effects caused by poly(lactide-ran-caprolactone) addition to double crystalline poly(l-lactide)/poly(ε-caprolactone) blends

     Article • CrystEngComm, January 2016, Royal Society of Chemistry

     Professor Alejandro J Müller

235. 
     The role of PLLA-g-montmorillonite nanohybrids in the acceleration of the crystallization rate of a commercial PLA

     Article • CrystEngComm, January 2016, Royal Society of Chemistry

     Professor Alejandro J Müller

236. 
     A complete TSDC description of molecular mobilities in polylactide/starch blends from local to normal modes: Effect of composition, moisture, and crystallinity

     Article • Journal of Polymer Science Part B Polymer Physics, November 2015, Wiley

     Professor Alejandro J Müller

237. 
     Thermal and tensile properties of corn semolina-protein blends in the glassy state

     Article • Journal of Food Engineering, November 2015, Elsevier

     Professor Alejandro J Müller

238. 
     The influence of short-chain branching on the morphology and structure of polyethylene single crystals

     Article • Journal of Polymer Science Part B Polymer Physics, October 2015, Wiley

     Professor Guoming Liu, Professor Alejandro J Müller

239. 
     Dynamic rheology and relaxation time spectra of oil-based self-degradable gels

     Article • Journal of Polymer Science Part B Polymer Physics, October 2015, Wiley

     Professor Alejandro J Müller

240. 
     Nucleation, Crystallization, and Thermal Fractionation of Poly (ε-Caprolactone)-Grafted-Lignin: Effects of Grafted Chains Length and Lignin Content

     Article • Journal of Polymer Science Part B Polymer Physics, September 2015, Wiley

     Professor Alejandro J Müller

241. 
     The outstanding ability of nanosilica to stabilize dispersions of Nylon 6 droplets in a polypropylene matrix

     Article • Journal of Polymer Science Part B Polymer Physics, July 2015, Wiley

     Professor Alejandro J Müller

242. 
     Evolution of Crystal Orientation in One-Dimensionally Confined Space Templated by Lamellae-Forming Block Copolymers

     Article • Macromolecules, July 2015, American Chemical Society (ACS)

     Professor Alejandro J Müller

243. 
     Self-assembly of semicrystalline PE-b-PS diblock copolymers within AAO nanoporous templates

     Article • Polymer, July 2015, Elsevier

     Professor Alejandro J Müller

244. 
     Enhanced Crystallization from the Glassy State of Poly( l -lactic acid) Confined in Anodic Alumina Oxide Nanopores

     Article • Macromolecules, April 2015, American Chemical Society (ACS)

     Professor Guoming Liu, Professor Alejandro J Müller

245. 
     Successive Self-nucleation and Annealing (SSA): Correct design of thermal protocol and applications

     Article • European Polymer Journal, April 2015, Elsevier

     Professor Alejandro J Müller

246. 
     Comparing crystallization rates between linear and cyclic poly(epsilon-caprolactones) via fast-scan chip-calorimeter measurements

     Article • Polymer, April 2015, Elsevier

     Professor Alejandro J Müller

247. 
     Fifty years of polymer science

     Article • European Polymer Journal, April 2015, Elsevier

     Professor Alejandro J Müller

248. 
     How Composition Determines the Properties of Isodimorphic Poly(butylene succinate- ran -butylene azelate) Random Biobased Copolymers: From Single to Double Crystalline Random Copolymers

     Article • Macromolecules, January 2015, American Chemical Society (ACS)

     Professor Alejandro J Müller, Professor Guoming Liu

249. 
     Degradation of styrene butadiene rubber (SBR) in anaerobic conditions

     Article • Polymer Degradation and Stability, January 2015, Elsevier

     Professor Alejandro J Müller

250. 
     Crystallization of Cyclic Polymers

     Article • January 2015, Springer Science + Business Media

     Professor Alejandro J Müller

251. 
     Self-Nucleation of Crystalline Phases Within Homopolymers, Polymer Blends, Copolymers, and Nanocomposites

     Article • January 2015, Springer Science + Business Media

     Professor Alejandro J Müller

252. 
     Influence of Chain Branching and Molecular Weight on Melt Rheology and Crystallization of Polyethylene/Carbon Nanotube Nanocomposites

     Article • Macromolecules, August 2014, American Chemical Society (ACS)

     Professor Alejandro J Müller

253. 
     Confined crystallization of polymers within anodic aluminum oxide templates

     Article • Journal of Polymer Science Part B Polymer Physics, July 2014, Wiley

     Professor Alejandro J Müller

254. 
     Nucleation, crystallization, self-nucleation and thermal fractionation of cyclic and linear poly(ε-caprolactone)s

     Article • Reactive and Functional Polymers, July 2014, Elsevier

     Professor Alejandro J Müller

255. 
     Computer simulations of the early stages of crystal nucleation of linear and short chain branched polyethylene on carbon nanotubes

     Article • European Polymer Journal, July 2014, Elsevier

     Professor Alejandro J Müller

256. 
     Nucleation and Antinucleation Effects of Functionalized Carbon Nanotubes on Cyclic and Linear Poly(ε-caprolactones)

     Article • Macromolecules, June 2014, American Chemical Society (ACS)

     Professor Alejandro J Müller

257. 
     Glass transitions and physical aging of cassava starch – Corn oil blends

     Article • Carbohydrate Polymers, May 2014, Elsevier

     Professor Alejandro J Müller

258. 
     Crystallization behavior of polyethylene/polystyrene AmBnmiktoarm star copolymers

     Article • Polymers for Advanced Technologies, April 2014, Wiley

     Professor Alejandro J Müller

259. 
     Relaxation time spectra from short frequency range small-angle dynamic rheometry

     Article • Rheologica Acta, April 2014, Springer Science + Business Media

     Professor Alejandro J Müller

260. 
     Confinement Induced First Order Crystallization Kinetics for the Poly(ethylene oxide) Block within A PEO-b -PB Diblock Copolymer Infiltrated within Alumina Nano-Porous Template

     Article • Macromolecular Symposia, March 2014, Wiley

     Professor Alejandro J Müller

261. 
     Kinetics of Cross-Nucleation in Isotactic Poly(1-butene)

     Article • Macromolecules, January 2014, American Chemical Society (ACS)

     Professor Alejandro J Müller

262. 
     Self-nucleation of isotactic poly(1-butene) in the trigonal modification

     Article • Polymer, January 2014, Elsevier

     Professor Alejandro J Müller

263. 
     Stereocomplexation of Polylactide Enhanced by Poly(methyl methacrylate): Improved Processability and Thermomechanical Properties of Stereocomplexable Polylactide-Based Materials

     Article • ACS Applied Materials & Interfaces, November 2013, American Chemical Society (ACS)

     Professor Alejandro J Müller

264. 
     Anti-plasticization of cassava starch by complexing fatty acids

     Article • Carbohydrate Polymers, October 2013, Elsevier

     Professor Alejandro J Müller

265. 
     Monitoring abiotic degradation of branched polyethylenes formulated with pro-oxidants through different mechanical tests

     Article • Polymer Degradation and Stability, September 2013, Elsevier

     Professor Alejandro J Müller

266. 
     On cross- and self-nucleation in seeded crystallization of isotactic poly(1-butene)

     Article • Polymer, August 2013, Elsevier

     Professor Alejandro J Müller

267. 
     The influence of nanosilica on the nucleation, crystallization and tensile properties of PP–PC and PP–PA blends

     Article • Polymer, July 2013, Elsevier

     Professor Alejandro J Müller

268. 
     Confinement effects on polymer crystallization: From droplets to alumina nanopores

     Article • Polymer, July 2013, Elsevier

     Professor Alejandro J Müller

269. 
     Thermal, structural and rheological characteristics of dark chocolate with different compositions

     Article • Journal of Food Engineering, May 2013, Elsevier

     Professor Alejandro J Müller

270. 
     Abiotic degradation of LDPE and LLDPE formulated with a pro-oxidant additive

     Article • Polymer Degradation and Stability, February 2013, Elsevier

     Professor Alejandro J Müller

271. 
     Instability of styrene/polystyrene/polybutadiene/polystyrene-b -polybutadiene emulsions that emulate styrene polymerization in the presence of polybutadiene

     Article • Polymer Engineering & Science, January 2013, Wiley

     Professor Alejandro J Müller

272. 
     New insights on the crystallization and melting of cyclic PCL chains on the basis of a modified Thomson–Gibbs equation

     Article • Polymer, January 2013, Elsevier

     Professor Alejandro J Müller

273. 
     Novel poly(ester-urethane)s based on polylactide: From reactive extrusion to crystallization and thermal properties

     Article • Polymer, November 2012, Elsevier

     Professor Alejandro J Müller

274. 
     Effect of two different lipid sources on glass transition temperatures and tensile properties of corn semolina

     Article • Journal of Food Engineering, November 2012, Elsevier

     Professor Alejandro J Müller

275. 
     The Crystallization of Confined Polymers and Block Copolymers Infiltrated Within Alumina Nanotube Templates

     Article • Macromolecules, February 2012, American Chemical Society (ACS)

     Professor Alejandro J Müller

276. 
     Supernucleation and crystallization regime change provoked by MWNT addition to poly(ε-caprolactone)

     Article • Polymer, February 2012, Elsevier

     Professor Alejandro J Müller

277. 
     Glass transition temperatures of cassava starch–whey protein concentrate systems at low and intermediate water content

     Article • Carbohydrate Polymers, January 2012, Elsevier

     Professor Alejandro J Müller

278. 
     Isothermal Cold-Crystallization of PLA/PBAT Blends With and Without the Addition of Acetyl Tributyl Citrate

     Article • Macromolecular Chemistry and Physics, December 2011, Wiley

     Professor Alejandro J Müller

279. 
     Single crystals morphology of biodegradable double crystalline PLLA-b-PCL diblock copolymers

     Article • Polymer, October 2011, Elsevier

     Professor Alejandro J Müller

280. 
     Orthogonal Crystal Orientation in Double-Crystalline Block Copolymer

     Article • Macromolecules, September 2011, American Chemical Society (ACS)

     Professor Alejandro J Müller

281. 
     Crystallization and stereocomplexation behavior of poly(D - and L -lactide)-b -poly(N ,N -dimethylamino-2-ethyl methacrylate) block copolymers

     Article • Journal of Polymer Science Part B Polymer Physics, August 2011, Wiley

     Professor Alejandro J Müller

282. 
     SAXS/DSC Analysis of the Lamellar Thickness Distribution on a SSA Thermally Fractionated Model Polyethylene

     Article • Macromolecular Chemistry and Physics, July 2011, Wiley

     Professor Alejandro J Müller

283. 
     Shear-thickening behavior of high molecular weight poly(ethylene oxide) solutions

     Article • Rheologica Acta, July 2011, Springer Science + Business Media

     Professor Alejandro J Müller

284. 
     Effects of corn oil on glass transition temperatures of cassava starch

     Article • Carbohydrate Polymers, July 2011, Elsevier

     Professor Alejandro J Müller

285. 
     Evaluation of the potential of novel PCL-PPDX biodegradable scaffolds as support materials for cartilage tissue engineering

     Article • Journal of Tissue Engineering and Regenerative Medicine, May 2011, Wiley

     Professor Alejandro J Müller

286. 
     New dendronized polymers from acrylate Behera amine and their ability to produce visco-elastic structured fluids when mixed with CTAT worm-like micelles

     Article • Journal of Colloid and Interface Science, May 2011, Elsevier

     Professor Alejandro J Müller

287. 
     Universality and Percolation in Biodegradable Poly(ε-caprolactone)/Multiwalled Carbon Nanotube Nanocomposites from Broad Band Alternating and Direct Current Conductivity at Various Temperatures

     Article • Macromolecules, April 2011, American Chemical Society (ACS)

     Professor Alejandro J Müller

288. 
     The Influence of Blend Morphology (Co-Continuous or Sub-Micrometer Droplets Dispersions) on the Nucleation and Crystallization Kinetics of Double Crystalline Polyethylene/Polyamide Blends Prepared by Reactive Extrusion

     Article • Macromolecular Chemistry and Physics, April 2011, Wiley

     Professor Alejandro J Müller

289. 
     A Comparative Study on the Crystallization Behavior of Analogous Linear and Cyclic Poly(ε-caprolactones)

     Article • Macromolecules, April 2011, American Chemical Society (ACS)

     Professor Alejandro J Müller

290. 
     Determination of Moisture Sorption Characteristics of Oat Flour by Static and Dynamic Techniques with and Without Thymol as an Antimicrobial Agent

     Article • Food Biophysics, April 2011, Springer Science + Business Media

     Professor Alejandro J Müller

291. 
     Super-nucleation in nanocomposites and confinement effects on the crystallizable components within block copolymers, miktoarm star copolymers and nanocomposites

     Article • European Polymer Journal, April 2011, Elsevier

     Professor Alejandro J Müller

292. 
     Critical Analysis of the Crystal Orientation Behavior in Polyethylene-Based Crystalline−Amorphous Diblock Copolymer

     Article • The Journal of Physical Chemistry, March 2011, American Chemical Society (ACS)

     Professor Alejandro J Müller

293. 
     Lower Critical Ordering Transition of Poly(ethylene oxide)- block -poly(2-vinylpyridine)

     Article • Macromolecules, February 2011, American Chemical Society (ACS)

     Professor Alejandro J Müller

294. 
     Shear rheology of anionic and zwitterionic modified polyacrylamides

     Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, January 2011, Elsevier

     Professor Alejandro J Müller

295. 
     Use of the successive self-nucleation and annealing technique to characterize 60Co gamma irradiated HDPEs

     Article • Journal of Thermal Analysis and Calorimetry, November 2010, Springer Science + Business Media

     Professor Alejandro J Müller

296. 
     The effect of hydrophobic modifications on the adsorption isotherms of cassava starch

     Article • Carbohydrate Polymers, July 2010, Elsevier

     Professor Alejandro J Müller

297. 
     Effect of sequence distribution on the isothermal crystallization kinetics and successive self-nucleation and annealing (SSA) behavior of poly(ε-caprolactone-co-ε-caprolactam) copolymers

     Article • European Polymer Journal, June 2010, Elsevier

     Professor Alejandro J Müller

298. 
     Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA-b-PCL Diblock Copolymers

     Article • Macromolecules, May 2010, American Chemical Society (ACS)

     Professor Alejandro J Müller

299. 
     Effect of ionic environment on the rheology of wormlike micelle solutions of mixtures of surfactants with opposite charge

     Article • Journal of Colloid and Interface Science, February 2010, Elsevier

     Professor Alejandro J Müller

300. 
     Crystallization studies on linear aliphatic n -polyurethanes

     Article • Journal of Polymer Science Part B Polymer Physics, January 2010, Wiley

     Professor Alejandro J Müller

301. 
     Crystallization and Physical Ageing of Poly (2-vinyl pyridine)-b -poly(ethylene oxide) Diblock Copolymers

     Article • Macromolecular Symposia, January 2010, Wiley

     Professor Hermis Iatrou, Professor Alejandro J Müller

302. 
     Gelation kinetics of an imitation-mortadella emulsion during heat treatment determined by oscillatory rheometry

     Article • Journal of Food Engineering, December 2009, Elsevier

     Professor Alejandro J Müller

303. 
     Influence of Macromolecular Architecture on the Crystallization of (PCL 2 )- b -(PS 2 ) 4-Miktoarm Star Block Copolymers in Comparison to Linear PCL- b -PS Diblock Copolymer Analogues

     Article • Macromolecules, November 2009, American Chemical Society (ACS)

     Professor Alejandro J Müller

304. 
     Effect of Sequence Distribution on the Morphology, Crystallization, Melting, and Biodegradation of Poly(ε-caprolactone- co -ε-caprolactam) Copolymers

     Article • Macromolecules, September 2009, American Chemical Society (ACS)

     Professor Alejandro J Müller

305. 
     Surface modification of multiwalled carbon nanotubes with biocompatible polymers via ring opening and living anionic surface initiated polymerization. Kinetics and crystallization behavior

     Article • Journal of Polymer Science Part A Polymer Chemistry, September 2009, Wiley

     Dr Dimitrios Priftis, Professor Alejandro J Müller

306. 
     Thermal Characterization and Phase Behavior of a Ready-to-Eat Breakfast Cereal Formulation and its Starchy Components

     Article • Food Biophysics, August 2009, Springer Science + Business Media

     Professor Alejandro J Müller

307. 
     Synthesis of amphiphilic dendrons and their interactions in aqueous solutions with cetyltrimethylammonium p-toluenesulfonate (CTAT)

     Article • Journal of Colloid and Interface Science, August 2009, Elsevier

     Professor Alejandro J Müller

308. 
     Molecular Mobilities in Biodegradable Poly( dl -lactide)/Poly(ε-caprolactone) Blends

     Article • Macromolecules, July 2009, American Chemical Society (ACS)

     Professor Alejandro J Müller

309. 
     Crystallization studies on linear aliphaticn-polyurethanes

     Article • Journal of Polymer Science Part B Polymer Physics, July 2009, Wiley

     Professor Alejandro J Müller

310. 
     Rheology, Processing, Tensile Properties, and Crystallization of Polyethylene/Carbon Nanotube Nanocomposites

     Article • Macromolecules, July 2009, American Chemical Society (ACS)

     Professor Alejandro J Müller

311. 
     Rheological Behavior of Bigrafted Hydrophobically Modified Polyelectrolyte

     Article • Macromolecules, July 2009, American Chemical Society (ACS)

     Professor Alejandro J Müller

312. 
     Crystallization and morphology of biodegradable or biostable single and double crystalline block copolymers

     Article • Progress in Polymer Science, June 2009, Elsevier

     Professor Alejandro J Müller

313. 
     Moisture Sorption Characteristics of Starchy Products: Oat Flour and Rice Flour

     Article • Food Biophysics, May 2009, Springer Science + Business Media

     Professor Alejandro J Müller

314. 
     Synthesis and rheological properties of hydrophobically modified polyacrylamides with lateral chains of poly(propylene oxide) oligomers

     Article • Journal of Colloid and Interface Science, May 2009, Elsevier

     Professor Alejandro J Müller

315. 
     Primary and secondary dielectric relaxations in semi-crystalline and amorphous starch

     Article • European Polymer Journal, May 2009, Elsevier

     Professor Alejandro J Müller

316. 
     Glass transition temperatures of a ready to eat breakfast cereal formulation and its main components determined by DSC and DMTA

     Article • Carbohydrate Polymers, May 2009, Elsevier

     Professor Alejandro J Müller

317. 
     Piezoresistive behavior of epoxy matrix-carbon fiber composites with different reinforcement arrangements

     Article • Journal of Applied Polymer Science, March 2009, Wiley

     Professor Alejandro J Müller

318. 
     Glass transition temperatures and water sorption isotherms of cassava starch

     Article • Carbohydrate Polymers, March 2009, Elsevier

     Professor Alejandro J Müller

319. 
     Recent Advances and Applications of “Successive Self-Nucleation and Annealing” (SSA) High Speed Thermal Fractionation

     Article • Macromolecular Symposia, February 2009, Wiley

     Professor Alejandro J Müller

320. 
     Microwave-assisted modification of starch for compatibilizing LLDPE/starch blends

     Article • Carbohydrate Polymers, January 2009, Elsevier

     Professor Alejandro J Müller

321. 
     Changes in crystalline morphology, thermal, and mechanical properties with hydrolytic degradation of immiscible biodegradable PPDX/PCL blends

     Article • Journal of Applied Polymer Science, December 2008, Wiley

     Professor Alejandro J Müller

322. 
     Solutions of xanthan gum/guar gum mixtures: shear rheology, porous media flow, and solids transport in annular flow

     Article • Rheologica Acta, December 2008, Springer Science + Business Media

     Professor Alejandro J Müller

323. 
     Time effects on the rheological behavior of hydrophobically modified polyacrylamide aqueous solutions mixed with sodium dodecyl sulfate (SDS)

     Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, December 2008, Elsevier

     Professor Alejandro J Müller

324. 
     Evaluation of cell affinity on poly(L-lactide) and poly(ε-caprolactone) blends and on PLLA-b-PCL diblock copolymer surfaces

     Article • Journal of Biomedical Materials Research Part A, November 2008, Wiley

     Professor Alejandro J Müller

325. 
     The effect of NaCl addition on the rheological behavior of cetyltrimethylammonium p-toluenesulfonate (CTAT) aqueous solutions and their mixtures with hydrophobically modified polyacrylamide aqueous solutions

     Article • Rheologica Acta, October 2008, Springer Science + Business Media

     Professor Alejandro J Müller

326. 
     Shear rheology and porous media flow of wormlike micelle solutions formed by mixtures of surfactants of opposite charge

     Article • Journal of Colloid and Interface Science, October 2008, Elsevier

     Professor Alejandro J Müller

327. 
     Shear and extensional rheology of solutions of mixtures of poly(ethylene oxide) and anionic surfactants in ionic environments

     Article • Journal of Colloid and Interface Science, October 2008, Elsevier

     Professor Alejandro J Müller

328. 
     Use of modified poly(ϵ‐caprolactone) in the compatibilization of poly(ϵ‐caprolactone)/maize starch blends

     Article • Journal of Applied Polymer Science, September 2008, Wiley

     Professor Alejandro J Müller

329. 
     Confined Crystallization and Morphology of Melt Segregated PLLA- b -PE and PLDA- b -PE Diblock Copolymers

     Article • Macromolecules, August 2008, American Chemical Society (ACS)

     Professor Alejandro J Müller

330. 
     The effect of the ionic strength on the rheological behavior of hydrophobically modified polyacrylamide aqueous solutions mixed with sodium dodecyl sulfate (SDS) or cetyltrimethylammonium p-toluenesulfonate (CTAT)

     Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, June 2008, Elsevier

     Professor Alejandro J Müller

331. 
     Synergistic effects in flows of mixtures of wormlike micelles and hydroxyethyl celluloses with or without hydrophobic modifications

     Article • Journal of Colloid and Interface Science, June 2008, Elsevier

     Professor Alejandro J Müller

332. 
     Crystallization Kinetics of PEO and PE in Different Triblock Terpolymers: Effect of Microdomain Geometry and Confinement

     Article • Macromolecular Chemistry and Physics, March 2008, Wiley

     Professor Alejandro J Müller

333. 
     Thermal Fractionation and Isothermal Crystallization of Polyethylene Nanocomposites Prepared by in Situ Polymerization

     Article • Macromolecules, March 2008, American Chemical Society (ACS)

     Professor Alejandro J Müller

334. 
     Fractionated Crystallization and Fractionated Melting of Confined PEO Microdomains in PB- b -PEO and PE- b -PEO Diblock Copolymers

     Article • Macromolecules, February 2008, American Chemical Society (ACS)

     Professor Alejandro J Müller

335. 
     Estimation of the nucleation and crystal growth contributions to the overall crystallization energy barrier

     Article • Journal of Polymer Science Part B Polymer Physics, January 2008, Wiley

     Professor Alejandro J Müller

336. 
     Rheological Study of the Shape Transition of Block Copolymer−Nonionic Surfactant Mixed Micelles

     Article • Langmuir, October 2007, American Chemical Society (ACS)

     Professor Alejandro J Müller

337. 
     Thermal and Morphological Characterization of Nanocomposites Prepared by in-Situ Polymerization of High-Density Polyethylene on Carbon Nanotubes

     Article • Macromolecules, August 2007, American Chemical Society (ACS)

     Professor Alejandro J Müller

338. 
     Study of Failure Factors for the Collapse of PVDF Pipelines

     Article • Microscopy and Microanalysis, August 2007, Cambridge University Press

     Professor Alejandro J Müller

339. 
     Nucleation and Isothermal Crystallization of the Polyethylene Block within Diblock Copolymers Containing Polystyrene and Poly(ethylene- alt -propylene)

     Article • Macromolecules, July 2007, American Chemical Society (ACS)

     Professor Alejandro J Müller

340. 
     Miscibility in poly(L-lactide)- b -poly( $ \upvarepsilon$ -caprolactone) double crystalline diblock copolymers

     Article • The European Physical Journal E, July 2007, Springer Science + Business Media

     Professor Alejandro J Müller

341. 
     Crystallization, Morphology, and Enzymatic Degradation of Polyhydroxybutyrate/Polycaprolactone (PHB/PCL) Blends

     Article • Macromolecular Chemistry and Physics, May 2007, Wiley

     Professor Alejandro J Müller

342. 
     DSC isothermal polymer crystallization kinetics measurements and the use of the Avrami equation to fit the data: Guidelines to avoid common problems

     Article • Polymer Testing, April 2007, Elsevier

     Professor Alejandro J Müller

343. 
     Rheology of aqueous solutions of hydrophobically modified polyacrylamides and surfactants

     Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, March 2007, Elsevier

     Professor Alejandro J Müller

344. 
     Effect of ionic strength on the rheological behavior of aqueous cetyltrimethylammonium p-toluene sulfonate solutions

     Article • Journal of Colloid and Interface Science, March 2007, Elsevier

     Professor Alejandro J Müller

345. 
     Synthesis and Characterization of Novel Linear PB- b -PS- b -PEO and PE- b -PS- b -PEO Triblock Terpolymers

     Article • Macromolecules, February 2007, American Chemical Society (ACS)

     Professor Alejandro J Müller

346. 
     Effect of temperature, moisture and lipid content on the rheological properties of rice flour

     Article • Journal of Food Engineering, February 2007, Elsevier

     Professor Alejandro J Müller

347. 
     Synthesis and morphological characterization of miktoarm star copolymers (PCL)2(PS)2 of poly(ɛ-caprolactone) and polystyrene

     Article • Journal of Polymer Science Part A Polymer Chemistry, January 2007, Wiley

     Dr Dimitrios Priftis, Professor Alejandro J Müller

348. 
     Desarrollo de prótesis de núcleo pulposo — Modelo de elementos finitos de una unidad funcional de la columna vertebral y caracterización de materiales

     Article • January 2007, Springer Science + Business Media

     Professor Alejandro J Müller

349. 
     Crystallization Kinetics of Homogeneous and Melt Segregated PE Containing Diblock Copolymers

     Article • Macromolecular Symposia, December 2006, Wiley

     Professor Alejandro J Müller

350. 
     Nucleation and Crystallization of PLDA-b-PE and PLLA-b-PE Diblock Copolymers

     Article • Macromolecular Symposia, October 2006, Wiley

     Professor Alejandro J Müller

351. 
     Self-Nucleation Behavior of the Polyethylene Block as Function of the Confinement Degree in Polyethylene-Block-Polystyrene Diblock Copolymers

     Article • Macromolecular Symposia, July 2006, Wiley

     Professor Alejandro J Müller

352. 
     Melt Structure and its Transformation by Sequential Crystallization of the Two Blocks within Poly(L-lactide)-block-Poly(ɛ-caprolactone) Double Crystalline Diblock Copolymers

     Article • Macromolecular Chemistry and Physics, June 2006, Wiley

     Professor Alejandro J Müller

353. 
     Synthesis and Characterization of Triblock Terpolymers with three Potentially Crystallisable Blocks: Polyethylene-b-poly(ethylene oxide)-b-poly(ɛ-caprolactone)

     Article • Macromolecular Symposia, June 2006, Wiley

     Professor Alejandro J Müller

354. 
     Confinement effects on the crystallization and SSA thermal fractionation of the PE block within PE-b-PS diblock copolymers

     Article • European Polymer Journal, March 2006, Elsevier

     Professor Alejandro J Müller

355. 
     High Speed SSA Thermal Fractionation and Limitations to the Determination of Lamellar Sizes and Their Distributions

     Article • Macromolecular Chemistry and Physics, January 2006, Wiley

     Professor Alejandro J Müller

356. 
     Effect of annealing time on the self-nucleation behavior of semicrystalline polymers

     Article • Journal of Polymer Science Part B Polymer Physics, January 2006, Wiley

     Professor Alejandro J Müller

357. 
     Effect of isothermal crystallization on the amorphous phase mobility of polycarbonate/poly(ε-caprolactone) blends

     Article • Polymer, August 2005, Elsevier

     Professor Alejandro J Müller

358. 
     Miscibility and Crystallization in Polycarbonate/Poly(ε-caprolactone) Blends:  Application of the Self-Concentration Model

     Article • Macromolecules, June 2005, American Chemical Society (ACS)

     Professor Alejandro J Müller

359. 
     Hydrolytic Degradation of Double Crystalline PPDX-b-PCL Diblock Copolymers

     Article • Macromolecular Chemistry and Physics, May 2005, Wiley

     Professor Alejandro J Müller

360. 
     Thermal fractionation of polymers

     Article • Progress in Polymer Science, May 2005, Elsevier

     Professor Alejandro J Müller

361. 
     Self-nucleation and crystallization kinetics of double crystalline poly(p-dioxanone)-b-poly(ε-caprolactone) diblock copolymers

     Article • Faraday Discussions, January 2005, Royal Society of Chemistry

     Professor Alejandro J Müller

362. 
     Optimization of the coordination-insertion ring-opening polymerization of poly(p-dioxanone) by programmed decreasing reaction temperatures

     Article • Journal of Applied Polymer Science, January 2005, Wiley

     Professor Alejandro J Müller

363. 
     Crystallization in Poly( l -lactide)- b -poly(ε-caprolactone) Double Crystalline Diblock Copolymers:  A Study Using X-ray Scattering, Differential Scanning Calorimetry, and Polarized Optical Microscopy

     Article • Macromolecules, January 2005, American Chemical Society (ACS)

     Professor Alejandro J Müller

364. 
     The role of shear and elongation in the flow of solutions of semi-flexible polymers through porous media

     Article • Rheologica Acta, December 2004, Springer Science + Business Media

     Professor Alejandro J Müller

365. 
     Non-Newtonian annular vertical flow of sand suspensions in aqueous solutions of guar gum

     Article • Journal of Petroleum Science and Engineering, November 2004, Elsevier

     Professor Alejandro J Müller

366. 
     Confinement Effects on the Crystallization Kinetics and Self-Nucleation of Double Crystalline Poly(p-dioxanone)-b-poly(ε-caprolactone) Diblock Copolymers

     Article • Macromolecular Symposia, August 2004, Wiley

     Professor Alejandro J Müller

367. 
     Coincident or sequential crystallization of PCL and PEO blocks within polystyrene-b-poly(ethylene oxide)-b-poly(ε-caprolactone) linear triblock copolymers

     Article • European Polymer Journal, July 2004, Elsevier

     Professor Alejandro J Müller

368. 
     Effect of the polyethylene confinement and topology on its crystallisation within semicrystalline ABC triblock copolymers

     Article • European Polymer Journal, June 2004, Elsevier

     Professor Alejandro J Müller

369. 
     Effect of the Flow Field on the Rheological Behavior of Aqueous Cetyltrimethylammonium p -Toluenesulfonate Solutions

     Article • Langmuir, May 2004, American Chemical Society (ACS)

     Professor Alejandro J Müller

370. 
     Influence of in Vitro Hydrolytic Degradation on the Morphology and Crystallization Behavior of Poly( p -dioxanone)

     Article • Biomacromolecules, March 2004, American Chemical Society (ACS)

     Professor Josee Brisson, Professor Alejandro J Müller

371. 
     Use of rheological compatibility criteria to study SBS modified asphalts

     Article • Journal of Applied Polymer Science, September 2003, Wiley

     Professor Alejandro J Müller

372. 
     New comb-like poly(n-alkyl itaconate)s with crystalizable side chains

     Article • Polymer, August 2003, Elsevier

     Professor Alejandro J Müller

373. 
     Morphology and Crystallization Kinetics of Melt Miscible Polyolefin Blends

     Article • Macromolecular Chemistry and Physics, August 2003, Wiley

     Professor Alejandro J Müller

374. 
     Nucleation and Crystallization in Double Crystalline Poly( p -dioxanone)- b -poly(ε-caprolactone) Diblock Copolymers

     Article • Macromolecules, March 2003, American Chemical Society (ACS)

     Professor Alejandro J Müller

375. 
     Dielectric Relaxations in Structurally Disordered Materials

     Article • Radiation Effects and Defects in Solids, January 2003, Taylor & Francis

     Professor Alejandro J Müller

376. 
     Crystallization in ABC Triblock Copolymers with Two Different Crystalline End Blocks: Influence of Confinement on Self-Nucleation Behavior

     Article • Macromolecular Chemistry and Physics, January 2003, Wiley

     Professor Alejandro J Müller

377. 
     Synthesis and Characterization of ABC Triblock Copolymers with Two Different Crystalline End Blocks:  Influence of Confinement on Crystallization Behavior and Morphology

     Article • Macromolecules, December 2002, American Chemical Society (ACS)

     Professor Alejandro J Müller

378. 
     Shear and extensional rheology of solutions of modified hydroxyethyl celluloses and sodium dodecyl sulfate

     Article • Polymer, November 2002, Elsevier

     Professor Alejandro J Müller

379. 
     Thermal and morphological evaluation of very low density polyethylene/high density polyethylene blends

     Article • Polymer Engineering & Science, October 2002, Wiley

     Professor Alejandro J Müller

380. 
     From Miscible to Immiscible Polycarbonate/Poly(ε-caprolactone) Blends

     Article • Macromolecules, September 2002, American Chemical Society (ACS)

     Professor Alejandro J Müller

381. 
     Thermal and self-nucleation behavior of molecular complexes formed by p-nitrophenol and the poly(ethylene oxide) end block within an ABC triblock copolymer

     Article • Macromolecular Symposia, July 2002, Wiley

     Professor Alejandro J Müller

382. 
     Nucleation and crystallization of PS-b-PEO-b-PCL triblock copolymers

     Article • Macromolecular Symposia, July 2002, Wiley

     Professor Alejandro J Müller

383. 
     Elongational Flow of Solutions of Poly(ethylene oxide) and Sulfonated Surfactants

     Article • Journal of Colloid and Interface Science, July 2002, Elsevier

     Professor Alejandro J Müller

384. 
     The effect of hydrolytic degradation on the tensile properties of neat and reinforced Poly(p-dioxanone)

     Article • Polymer Bulletin, May 2002, Springer Science + Business Media

     Professor Alejandro J Müller

385. 
     Homogeneous Nucleation and Fractionated Crystallization in Block Copolymers †

     Article • Macromolecules, April 2002, American Chemical Society (ACS)

     Professor Alejandro J Müller

386. 
     Local and segmental dynamics in homopolymer and triblock copolymers with one semicrystalline block

     Article • January 2002, American Physical Society (APS)

     Professor Alejandro J Müller

387. 
     Effect of ethanol addition on the elongational flow behavior of aqueous solutions of poly(ethylene oxide)

     Article • Polymer Bulletin, January 2002, Springer Science + Business Media

     Professor Alejandro J Müller

388. 
     Elongational Flow of Solutions Containing Poly(ethylene oxide)/Sodium Dodecyl Sulfate Complexes in the Presence of n-Alkanols

     Article • Journal of Colloid and Interface Science, December 2001, Elsevier

     Professor Alejandro J Müller

389. 
     Synthesis and Characterization of Polystyrene- b -poly(ethylene oxide)- b -poly(ε-caprolactone) Block Copolymers

     Article • Macromolecules, November 2001, American Chemical Society (ACS)

     Professor Alejandro J Müller

390. 
     Miscibility of linear and branched polyethylene blends by thermal fractionation: use of the successive self-nucleation and annealing (SSA) technique

     Article • Polymer, July 2001, Elsevier

     Professor Alejandro J Müller

391. 
     Compatibility Studies in Binary Blends of PA6 and ULDPE-graft-DEM

     Article • Macromolecular Chemistry and Physics, July 2001, Wiley

     Professor Alejandro J Müller

392. 
     Application of the SSA Calorimetric Technique to Characterise an XLPE Insulator Aged under Multiple Stresses

     Article • Macromolecular Chemistry and Physics, June 2001, Wiley

     Professor Alejandro J Müller

393. 
     Interactions between Poly(ethylene Oxide) and Sodium Dodecyl Sulfate in Elongational Flows

     Article • Journal of Colloid and Interface Science, April 2001, Elsevier

     Professor Alejandro J Müller

394. 
     Thermal characterization of polycarbonate/polycaprolactone blends

     Article • Journal of Polymer Science Part B Polymer Physics, January 2001, Wiley

     Professor Alejandro J Müller

395. 
     Crystallisation and morphology of neat and degraded poly(p-dioxanone)

     Article • Polymer Degradation and Stability, January 2001, Elsevier

     Professor Alejandro J Müller

396. 
     Flow of mixtures of poly(ethylene oxide) and hydrolyzed polyacrylamide solutions through opposed jets

     Article • Journal of Applied Polymer Science, June 2000, Wiley

     Professor Alejandro J Müller

397. 
     Influence of the hydrocarbon chain length in the phase transition from solid to liquid-crystal in n-alkylammonium chlorides

     Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, April 2000, Elsevier

     Professor Alejandro J Müller

398. 
     Article • Journal of Materials Science, January 2000, Springer Science + Business Media

     Professor Alejandro J Müller

399. 
     The evaluation of the state of dispersion in immiscible blends where the minor phase exhibits fractionated crystallization

     Article • Polymer Bulletin, September 1995, Springer Science + Business Media

     Professor Alejandro J Müller

400. 
     Extensional behavior of hydroxypropyl guar solutions: Optical rheometry in opposed jets and flow through porous media

     Article • Journal of Rheology, September 1995, Society of Rheology

     Professor Alejandro J Müller

401. 
     Turbulence suppression by polymer solutions in opposed jets flow

     Article • AIChE Journal, May 1995, Wiley

     Professor Alejandro J Müller

402. 
     Calorimetric study of blends of low density polyethylene (LDPE) and linear low density polyethylene (LLDPE) temperature rising elution fractionation (TREF) fractions

     Article • Macromolecular Chemistry and Physics, January 1995, Wiley

     Professor Alejandro J Müller

403. 
     Flow of solutions of hydroxypropyl guar-poly(ethylene oxide) mixtures through a porous medium

     Article • Polymer Bulletin, November 1994, Springer Science + Business Media

     Professor Alejandro J Müller

404. 
     Flow of monodisperse polystyrene solutions through porous media

     Article • Colloid & Polymer Science, October 1994, Springer Science + Business Media

     Professor Alejandro J Müller

405. 
     Homogeneous nucleation of the dispersed crystallisable component of immiscible polymer blends

     Article • Polymer Bulletin, April 1994, Springer Science + Business Media

     Professor Alejandro J Müller

406. 
     Flow of polymer solutions through porous media

     Article • Journal of Non-Newtonian Fluid Mechanics, September 1993, Elsevier

     Professor Alejandro J Müller

407. 
     Thermomechanical degradation of macromolecules

     Article • Colloid & Polymer Science, April 1992, Springer Science + Business Media

     Professor Alejandro J Müller

408. 
     Degradation of semidilute polymer solutions in elongational flows

     Article • Polymer, January 1992, Elsevier

     Professor Alejandro J Müller

409. 
     Stagnation-point extensional flow behaviour of M1

     Article • Journal of Non-Newtonian Fluid Mechanics, January 1990, Elsevier

     Professor Alejandro J Müller

410. 
     Non-Newtonian behaviour of hydrolysed polyacrylamide in strong elongational flows: a transient network approach

     Article • Polymer, July 1988, Elsevier

     Professor Alejandro J Müller

411. 
     Elongational flow and rheology of monodisperse polymers in solution

     Article • Journal of Non-Newtonian Fluid Mechanics, January 1988, Elsevier

     Professor Alejandro J Müller

412. 
     Entanglements in semi-dilute solutions as revealed by elongational flow studies

     Article • December 1987, Springer Science + Business Media

     Professor Alejandro J Müller

413. 
     Structure, Properties and Applications of ABA and ABC Triblock Copolymers with Hydrogenated Polybutadiene Blocks

     Article • Wiley

     Professor Alejandro J Müller

414. 
     Crystallization in Block Copolymers with More than One Crystallizable Block

     Article • Springer Science + Business Media

     Professor Alejandro J Müller

415. 
     Nucleation and Crystallization in Diblock and Triblock Copolymers

     Article • Springer Science + Business Media

     Professor Alejandro J Müller