Contact

All Stories

  1. The introduction of long-chain branches within linear semicrystalline polymers enhances overall crystallization by promoting homogeneous nucleation

    Article • Polymer, February 2026, Elsevier

    Professor Alejandro J Müller

  2. Polymorphic Self-Poisoning in the Isothermal Crystallization of Thermoplastic Polyurethanes

    Article • Macromolecules, January 2026, American Chemical Society (ACS)

    Professor Alejandro J Müller

  3. Understanding Enhanced Melt Memory in Poly(Octamethylene Carbonate)-Based Random Copolycarbonates with Mixed Isodimorphic/Isomorphic Crystallization

    Article • Macromolecules, January 2026, American Chemical Society (ACS)

    Professor Alejandro J Müller

  4. How chain stereoconfiguration and molecular weight influence Poly(propylene oxide) crystallization

    Article • European Polymer Journal, December 2025, Elsevier

    Professor Alejandro J Müller

  5. Hexadecylamine Addition Promotes Crystallization-Driven Functionalities in Freezing–Thaw PVA Hydrogels

    Article • Macromolecules, November 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  6. Impact of Chain Length on PCL Dielectric β-Relaxation: Decoupling the Roles of Chain Ends, Main Chains, Entanglements, and Crystallinity

    Article • Macromolecules, November 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  7. Can five chemically different lamellar crystals self-assemble in a single spherulite?

    Article • Nature Communications, November 2025, Springer Science + Business Media

    Professor Alejandro J Müller

  8. Coexistence of Isodimorphism, Isomorphism, and Comonomer Exclusion within a Single Family of Poly(butylene- ran -octamethylene carbonate) Random Copolymers

    Article • Macromolecules, November 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  9. Self-nucleation enhances the stability of the polymorphs present in triple polymorphic polythioethers

    Article • Polymer Testing, November 2025, Elsevier

    Professor Alejandro J Müller

  10. Self-Nucleation Enables Polymorphic Selection in Thermoplastic Polyurethanes

    Article • Macromolecules, September 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  11. Heating-induced dimensional changes in crystal lattice and lamellar thickness of isothermally crystallized poly(butylene 2,5-furandicarboxylate) (PBF)

    Article • Polymer, September 2025, Elsevier

    Professor Alejandro J Müller

  12. Multifunctional Protein Eutectogels Based on Polyphenolic: Zwitterionic Low‐Transition‐Temperature Mixtures

    Article • Advanced Functional Materials, August 2025, Wiley

    Professor Alejandro J Müller

  13. Effect of Side-Chain gem-dialkyl Substitution on the Crystallization of poly(δ-valerolactone): Competition between Steric Effects and Chain Flexibility

    Article • ACS Sustainable Chemistry & Engineering, August 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  14. Pasteurization-Triggered Heat-Resistant Enhancement of Packaging Films Derived from a Star-Shape Toughened Polylactide Stereocomplex

    Article • ACS Omega, July 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  15. The effect of entanglement concentration on the melt memory of polyethylene random copolymer

    Article • Polymer, July 2025, Elsevier

    Professor Alejandro J Müller

  16. Enhanced Self-nucleation in Protonated/Deuterated Short-Chain Branched Polyethylene Blends

    Article • Polymer, July 2025, Elsevier

    Professor Alejandro J Müller

  17. Crystallization of Polycaprolactone within Nanopapers Based on Graphene-Related Materials

    Article • Macromolecules, June 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  18. Asymmetric Benzene Sulfonamide Sodium Salt Enabling Stable Cycling in Solid‐State Sodium Metal Batteries

    Article • ChemSusChem, May 2025, Wiley

    Professor Alejandro J Müller

  19. The relationship between thermal, rheological, and tack properties of copolyester-based hot melt adhesives

    Article • International Journal of Polymer Analysis and Characterization, May 2025, Taylor & Francis

    Professor Alejandro J Müller

  20. The Hidden Isodimorphic Crystallization of Poly(ε-Caprolactone-Ran-ω-Pentadecalactone) Copolymers

    Article • Biomacromolecules, May 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  21. Cooling rate-dependent polymorphism in thermoplastic polyurethanes: effect of hard segments content

    Article • Polymer, May 2025, Elsevier

    Professor Alejandro J Müller

  22. The Use of Biodegradable Poly(ε‐Caprolactone) as a Matrix for Preparing Micro‐Composites with NdFeB Recycled Magnetic Particles

    Article • Macromolecular Chemistry and Physics, April 2025, Wiley

    Professor Alejandro J Müller

  23. Origin of Different Crystal Orientations of Ultrahigh-Molecular-Weight Polyethylene during Uniaxial Stretching: The Effect of Entanglements and Chains Tilt

    Article • Macromolecules, April 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  24. Understanding even-odd effects in linear semi-crystalline polymers: Polyethers, polycarbonates, polyesters, and polyamides

    Article • Polymer, April 2025, Elsevier

    Professor Alejandro J Müller

  25. Effect of Biobased Glycerol Trilevulinate on the Crystallization Kinetics of Biodegradable Polyesters

    Article • ACS Sustainable Chemistry & Engineering, March 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  26. Properties of Zone-Annealed Miscible Polymer Blends

    Article • Macromolecules, January 2025, American Chemical Society (ACS)

    Professor Alejandro J Müller

  27. Sulfur-containing block polymers from ring-opening copolymerization: coordinative encapsulants for transition metals

    Article • Polymer Chemistry, January 2025, Royal Society of Chemistry

    Professor Alejandro J Müller

  28. Synergistic engineering of poly(3-hydroxybutyrate) architecture and stereomicrostructure achieves enhanced material properties

    Article • Polymer Chemistry, January 2025, Royal Society of Chemistry

    Professor Alejandro J Müller

  29. Peculiar even-odd effect in semi-crystalline poly(alkylene succinate)s with a wide range of repeating unit chain lengths

    Article • Green Chemistry, January 2025, Royal Society of Chemistry

    Professor Alejandro J Müller

  30. Impact of Long-Chain Branching on Polypropylene Nucleation and Crystallization over a Wide Temperature Range without the Influence of Shear

    Article • Macromolecules, December 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller, Professor Jinyong Dong

  31. Control over Aspect Ratio and Polymer Spatial Distribution of 2D Platelets via Living Crystallization-Driven Self-Assembly

    Article • Macromolecules, November 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  32. Enhanced Piezoelectric Properties of Poly(L‐lactide) Nanocomposite Microfiber Scaffolds Due to Polydopamine‐Coating of Barium Titanate Nanoparticles

    Article • Advanced Materials Interfaces, November 2024, Wiley

    Professor Alejandro J Müller

  33. Decisive Role of the Specific Nanosized Secondary Crystals on the Phase Transition of Poly(vinylidene fluoride) Induced by Melt Memory

    Article • Macromolecules, November 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  34. Building Ultrastrong, Tough and Biodegradable Thermoplastic Elastomers from Multiblock Copolyesters Via a “Reserve‐Release” Crystallization Strategy

    Article • Angewandte Chemie, November 2024, Wiley

    Professor Alejandro J Müller

  35. Building Ultrastrong, Tough and Biodegradable Thermoplastic Elastomers from Multiblock Copolyesters Via a “Reserve‐Release” Crystallization Strategy

    Article • Angewandte Chemie, November 2024, Wiley

    Professor Alejandro J Müller

  36. Strong Hydrogen Bonds Sustain Even–Odd Effects in Poly(ester amide)s with Long Alkyl Chain Length in the Backbone

    Article • Biomacromolecules, October 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  37. Structure Formation and Unexpected Ultrafast Re-entanglement Dynamics of Disentangled Ultrahigh Molecular Weight Polyethylene

    Article • Macromolecules, October 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  38. How the Aliphatic Glycol Chain Length Determines the Pseudoeutectic Composition in Biodegradable Isodimorphic poly(alkylene succinate-ran-caprolactone) Random Copolyesters

    Article • Biomacromolecules, October 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  39. Mixed Isodimorphic/Isomorphic Crystallization in Aliphatic Random Copolycarbonates

    Article • Macromolecules, October 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  40. Crystallization Behavior of Block Copolymers of Isotactic Polypropylene and Linear Low-Density Polyethylene

    Article • ACS Applied Polymer Materials, September 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  41. Crystallization Kinetics of Crystalline–Crystalline and Crystalline–Amorphous Block Copolymers of Linear Polyethylene and Isotactic Polypropylene

    Article • Macromolecules, September 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  42. Chemical Composition and Mechanical Deformation Define Lamellar Sizes in Aliphatic Triblock-Based Polyurethane Elastomers

    Article • Macromolecules, August 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  43. Two-Stage Melting of Near-Symmetric Random Poly[(butylene succinate)-ran-(butylene adipate)] Copolyesters

    Article • Macromolecules, July 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  44. The Combined Effects of Optical Purity, Chain Orientation, Crystallinity, and Dynamic Mechanical Activation as Means to Obtain Highly Piezoelectric Polylactide Materials

    Article • ACS Applied Polymer Materials, June 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  45. Enzymatic Degradation Behavior of Self-Degradable Lipase-Embedded Aliphatic and Aromatic Polyesters and Their Blends

    Article • Biomacromolecules, June 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  46. Crystallization-Induced Self-Assembly of Poly(ethylene glycol) Side Chains in Dithiol–yne-Based Comb Polymers: Side Chain Spacing and Molecular Weight Effects

    Article • Macromolecules, May 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  47. Self-nucleation (SN) and successive self-nucleation and annealing (SSA) as powerful tools to determine the composition of polyolefin post-consumer recycled blends

    Article • Journal of Thermal Analysis and Calorimetry, May 2024, Springer Science + Business Media

    Professor Alejandro J Müller

  48. Polymer Physics Behind the Gel‐spinning of UHMWPE Fibers

    Article • Macromolecular Rapid Communications, April 2024, Wiley

    Professor Alejandro J Müller

  49. Isothermal crystallization of polyethylene droplets within the self-nucleated isotactic polypropylene matrix of a 70/30 iPP/PE immiscible blend via Fast Scanning Chip Calorimetry (FSC)

    Article • Polymer, April 2024, Elsevier

    Professor Alejandro J Müller

  50. Composite nano-fibrillated cellulose-alginate hydrogels: Effect of chemical composition on 3D extrusion printing and drug release

    Article • Polymer, March 2024, Elsevier

    Professor Alejandro J Müller

  51. Morphology and confinement effects on crystallization kinetics in polyethylene containing block copolymers

    Article • Polymer, March 2024, Elsevier

    Professor Alejandro J Müller

  52. Cyclic and Linear Tetrablock Copolymers Synthesized at Speed and Scale by Lewis Pair Polymerization of a One-Pot (Meth)acrylic Mixture and Characterized at Multiple Levels

    Article • Journal of the American Chemical Society, February 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  53. Towards a better understanding of the cosolvent effect on the low-temperature glycolysis of Polyethylene Terephthalate (PET)

    Article • Chemical Engineering Journal, February 2024, Elsevier

    Professor Alejandro J Müller

  54. Production of supertough and semiconductive PLA-based polymer blend nanocomposites by kinetic microstructural control

    Article • Polymer, February 2024, Elsevier

    Professor Alejandro J Müller

  55. Formulating PBS/PLA/PBAT blends for biodegradable, compostable packaging: The crucial roles of PBS content and reactive extrusion

    Article • Polymer Testing, February 2024, Elsevier

    Professor Alejandro J Müller

  56. All-Polymer Nanocomposite as Salt-Free Solid Electrolyte for Lithium Metal Batteries

    Article • ACS Polymers Au, January 2024, American Chemical Society (ACS)

    Professor Alejandro J Müller

  57. A novel approach for accurate determination of polyethylene and polypropylene content in polyolefin blends and recyclates by cross-fractionation chromatography

    Article • Polymer Testing, January 2024, Elsevier

    Professor Alejandro J Müller

  58. Crystallization kinetics of semiconducting poly(2,5-bis(3-alkylthiophen-2-yl)-thieno-[3,2-b]thiophene) (PBTTT) from its different liquid phases

    Article • Journal of Materials Chemistry C, January 2024, Royal Society of Chemistry

    Professor Alejandro J Müller

  59. Salt-induced Fmoc-tripeptide supramolecular hydrogels: a combined experimental and computational study of the self-assembly

    Article • Nanoscale, January 2024, Royal Society of Chemistry

    Professor Alejandro J Müller

  60. Influence of chain topology on gel formation and direct ink printing of model linear and star block copolymers with poly(ethylene oxide) and poly(ε-caprolactone) semi-crystalline blocks

    Article • European Polymer Journal, December 2023, Elsevier

    Professor Alejandro J Müller

  61. Effect of the Miscibility between Grafted and Matrix Chains on the Dispersion and Crystallization of Polyethylene-Grafted Silica Nanocomposites

    Article • Macromolecules, November 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  62. Synthesis and Crystallization of Waterborne Thiol–ene Polymers: Toward Innovative Oxygen Barrier Coatings

    Article • ACS Applied Polymer Materials, October 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  63. Challenging Isodimorphism Concepts: Formation of Three Crystalline Phases in Poly(hexamethylene-ran-octamethylene carbonate) Copolymers

    Article • Macromolecules, October 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  64. Tailoring the Nucleation and Crystallization Rate of Polyhydroxybutyrate by Copolymerization

    Article • Biomacromolecules, October 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  65. Structure, morphology and crystallization of isodimorphic random copolymers: Copolyesters, copolycarbonates and copolyamides

    Article • Polymer, October 2023, Elsevier

    Professor Alejandro J Müller

  66. High‐Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

    Article • Macromolecular Materials and Engineering, September 2023, Wiley

    Professor Alejandro J Müller

  67. Disappearance of Melt Memory Effect with Comonomer Incorporation in Isodimorphic Random Copolyesters

    Article • Macromolecules, September 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  68. Poly(lactic acid) Stereocomplexes based Molecular Architectures: Synthesis and Crystallization

    Article • Progress in Polymer Science, September 2023, Elsevier

    Professor Alejandro J Müller

  69. Tuning the crystallization and thermal properties of polyesters by introducing functional groups that induce intermolecular interactions

    Article • The Journal of Chemical Physics, August 2023, American Institute of Physics

    Professor Alejandro J Müller

  70. Robust and Transparent Polyamide 1012 Membranes for Biogas Purification Controlled by the Degree of Hydrogen Bonding Order

    Article • Macromolecules, August 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  71. Cationically photocured epoxy/polycaprolactone materials processed by solution electrospinning, melt electrowriting and 3D printing: Morphology and shape memory properties

    Article • Polymer, August 2023, Elsevier

    Professor Alejandro J Müller

  72. How 4-(7-Octen-1-yl)-N,N-diphenylaniline co-units induce strong melt memory effects in isotactic polypropylene random copolymers

    Article • Polymer, August 2023, Elsevier

    Professor Alejandro J Müller

  73. Correction to Crystal Structure of Poly(7-heptalactone)

    Article • Macromolecules, July 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  74. Surface-enhanced nucleation in immiscible polypropylene and polyethylene blends: The effect of polyethylene chain regularity

    Article • Polymer, July 2023, Elsevier

    Professor Alejandro J Müller

  75. Comonomer Inclusion in Single Crystals of Isodimorphic Random Copolymers of Butylene Succinate and ε-Caprolactone

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  76. Synthesis, Morphology, and Crystallization Kinetics of Polyheptalactone (PHL)

    Article • Biomacromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  77. Unraveling the Complex Polymorphic Crystallization Behavior of the Alternating Copolymer DMDS-alt-DVE

    Article • ACS Applied Polymer Materials, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  78. Nanoparticle Diffusion in Miscible Polymer Nanocomposite Melts

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  79. Effect of Molecular Weight on the Crystallization and Melt Memory of Poly(ε-caprolactone) (PCL)

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  80. Crystal Structure of Poly(7-heptalactone)

    Article • Macromolecules, June 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  81. Influence of FFF Process Conditions on the Thermal, Mechanical, and Rheological Properties of Poly(hydroxybutyrate-co-hydroxy Hexanoate)

    Article • Polymers, April 2023, MDPI AG

    Professor Alejandro J Müller

  82. Polyethylene Oxide/Sodium Sulfonamide Polymethacrylate Blends as Highly Conducting Single-Ion Solid Polymer Electrolytes

    Article • Energy & Fuels, March 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  83. Installing Controlled Stereo-Defects Yields Semicrystalline and Biodegradable Poly(3-Hydroxybutyrate) with High Toughness and Optical Clarity

    Article • Journal of the American Chemical Society, March 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  84. Crystallization, morphology and self-assembly of double, triple and tetra crystalline block polymers

    Article • Polymer Testing, March 2023, Elsevier

    Professor Alejandro J Müller

  85. Nucleation Assisted through the Memory of a Polymer Melt: A Different Polymorph Emerging from the Melt of Another One

    Article • Macromolecules, February 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  86. Supramolecular Networks Obtained by Block Copolymer Self-Assembly in a Polymer Matrix: Crystallization Behavior and Its Effect on the Mechanical Response

    Article • Macromolecules, February 2023, American Chemical Society (ACS)

    Professor Alejandro J Müller

  87. Structural evolution of poly(butylene succinate) crystals on heating with the formation of a dual lamellar population, as monitored by temperature-dependent WAXS/SAXS analysis

    Article • Polymer, January 2023, Elsevier

    Professor Alejandro J Müller

  88. The role of Eudragit® as a component of hydrogel formulations for medical devices

    Article • Journal of Materials Chemistry B, January 2023, Royal Society of Chemistry

    Professor Alejandro J Müller

  89. Crystallization-Driven Supramolecular Gelation of Poly(vinyl alcohol) by a Small Catechol Derivative

    Article • Macromolecules, December 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  90. Thermal and mechanical characteristics of a glassy food model based on cassava starch

    Article • Applied Food Research, December 2022, Elsevier

    Professor Alejandro J Müller

  91. Unraveling the Influence of the Preexisting Molecular Order on the Crystallization of Semiconducting Semicrystalline Poly(9,9-di-n-octylfluorenyl-2,7-diyl (PFO)

    Article • Chemistry of Materials, November 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  92. Effect of compatibilizer addition on the surface nucleation of dispersed polyethylene droplets in a self-nucleated polypropylene matrix

    Article • Polymer, November 2022, Elsevier

    Professor Alejandro J Müller

  93. Understanding polymer nucleation by studying droplets crystallization in immiscible polymer blends

    Article • Polymer, November 2022, Elsevier

    Professor Alejandro J Müller

  94. Thermal-Field-Tuned Heterogeneous Amorphous States of Poly(vinylidene fluoride) Films with Precise Transition from Nonpolar to Polar Phase

    Article • Macromolecules, October 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  95. Characterization and Modification of Red Mud and Ferrosilicomanganese Fines and Their Application in the Synthesis of Hybrid Hydrogels

    Article • Polymers, October 2022, MDPI AG

    Professor Alejandro J Müller

  96. (PVDF)2(PEO)2 miktoarm star copolymers: Synthesis and isothermal crystallization leading to exclusive β-phase formation

    Article • European Polymer Journal, October 2022, Elsevier

    Professor Alejandro J Müller

  97. Fractionated Crystallization Behavior of Low-Molecular-Weight Polyethylene Grafted onto SiO2 Nanoparticles

    Article • ACS Applied Polymer Materials, September 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  98. Effect of the TrFE Content on the Crystallization and SSA Thermal Fractionation of P(VDF-co-TrFE) Copolymers

    Article • International Journal of Molecular Sciences, September 2022, MDPI AG

    Professor Alejandro J Müller

  99. Crystallization Kinetics and Mechanical Properties of Miscible Polymer Blend Nanocomposites: Linear versus Grafted Systems

    Article • Macromolecules, September 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  100. Large amplitude oscillatory shear (LAOS) behavior of chocolates of different compositions

    Article • Journal of Rheology, September 2022, Society of Rheology

    Professor Alejandro J Müller

  101. Supernucleation Dominates Lignin/Poly(ethylene oxide) Crystallization Kinetics

    Article • Macromolecules, August 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  102. Effect of Initial Molecular Weight on the Structural Evolution of Polyamide 1012 during High-Temperature Thermal Treatments as Revealed by Successive Self-Nucleation and Annealing

    Article • Macromolecules, August 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  103. Effect of Chain Stereoconfiguration on Poly(3-hydroxybutyrate) Crystallization Kinetics

    Article • Biomacromolecules, August 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  104. Organizing Nanoparticles in Semicrystalline Polymers by Modifying Particle Diffusivity

    Article • ACS Macro Letters, June 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  105. Natural Deep Eutectic Solvents Based on Choline Chloride and Phenolic Compounds as Efficient Bioadhesives and Corrosion Protectors

    Article • ACS Sustainable Chemistry & Engineering, June 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  106. In Situ Atomic Force Microscopy Tracking of Nanoparticle Migration in Semicrystalline Polymers

    Article • ACS Macro Letters, June 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  107. Crystallization Rate Minima of Poly(ethylene brassylate) at Temperatures Transitioning between Quantized Crystal Thicknesses

    Article • Macromolecules, May 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  108. Improving the Mechanical Performance of LDPE/PP Blends through Microfibrillation

    Article • ACS Applied Polymer Materials, May 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  109. Crystallization kinetics and nanoparticle ordering in semicrystalline polymer nanocomposites

    Article • Progress in Polymer Science, May 2022, Elsevier

    Professor Alejandro J Müller

  110. Fast successive self‐nucleation and annealing (SSA) thermal fractionation protocol for the characterization of polyolefin blends from mechanical recycling

    Article • Journal of Polymer Science, April 2022, Wiley

    Professor Alejandro J Müller

  111. The role of intermolecular interactions on melt memory and thermal fractionation of semicrystalline polymers

    Article • The Journal of Chemical Physics, April 2022, American Institute of Physics

    Professor Alejandro J Müller

  112. A Review on Current Strategies for the Modulation of Thermomechanical, Barrier, and Biodegradation Properties of Poly (Butylene Succinate) (PBS) and Its Random Copolymers

    Article • Polymers, March 2022, MDPI AG

    Professor Alejandro J Müller

  113. Surface Roughness Enhances Self-Nucleation of High-Density Polyethylene Droplets Dispersed within Immiscible Blends

    Article • Macromolecules, February 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  114. Rheology and Tack Properties of Biodegradable Isodimorphic Poly(butylene succinate)-Ran-Poly(ε-caprolactone) Random Copolyesters and Their Potential Use as Adhesives

    Article • Polymers, February 2022, MDPI AG

    Professor Alejandro J Müller

  115. Self-assembly and crystallization of double crystalline aliphatic thermoplastic biopolyurethane and its nucleation with cellulose nanocrystals

    Article • Polymer, February 2022, Elsevier

    Professor Alejandro J Müller

  116. Enhanced and Reusable Poly(hydroxy urethane)-Based Low Temperature Hot-Melt Adhesives

    Article • ACS Polymers Au, January 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  117. Unexpected Structural Properties in the Saturation Region of the Odd–Even Effects in Aliphatic Polyethers: Influence of Crystallization Conditions

    Article • Macromolecules, January 2022, American Chemical Society (ACS)

    Professor Alejandro J Müller

  118. Electroactive 3D printable poly(3,4-ethylenedioxythiophene)-graft-poly(ε-caprolactone) copolymers as scaffolds for muscle cell alignment

    Article • Polymer Chemistry, January 2022, Royal Society of Chemistry

    Professor Alejandro J Müller

  119. Competing crystallization of α- and β-phase induced by β-nucleating agents in microdroplets of isotactic polypropylene

    Article • CrystEngComm, January 2022, Royal Society of Chemistry

    Professor Alejandro J Müller

  120. Facile construction of functional poly(monothiocarbonate) copolymers under mild operating conditions

    Article • Polymer Chemistry, January 2022, Royal Society of Chemistry

    Professor Alejandro J Müller

  121. Miscibility, Morphology, and Crystallization Kinetics of Biodegradable Poly(ε-caprolactone)/Ascorbic Acid Blends

    Article • ACS Applied Polymer Materials, December 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  122. Polycaprolactone Adsorption and Nucleation onto Graphite Nanoplates for Highly Flexible, Thermally Conductive, and Thermomechanically Stiff Nanopapers

    Article • ACS Applied Materials & Interfaces, December 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  123. Ternary Poly(ethylene oxide)/Poly(l,l-lactide) PEO/PLA Blends as High-Temperature Solid Polymer Electrolytes for Lithium Batteries

    Article • ACS Applied Polymer Materials, November 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  124. Mastering Superior Performance Origins of Ionic Polyurethane/Silica Hybrids

    Article • ACS Applied Polymer Materials, November 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  125. Structure and Properties of Reactively Extruded Opaque Post-Consumer Recycled PET

    Article • Polymers, October 2021, MDPI AG

    Professor Alejandro J Müller

  126. Using Successive Self-Nucleation and Annealing to Detect the Solid–Solid Transitions in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)

    Article • Macromolecules, October 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  127. Surface Nucleation of Dispersed Polyethylene Droplets in Immiscible Blends Revealed by Polypropylene Matrix Self-Nucleation

    Article • Macromolecules, September 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  128. Crystallization and Morphology of Triple Crystalline Polyethylene-b-poly(ethylene oxide)-b-poly(ε-caprolactone) PE-b-PEO-b-PCL Triblock Terpolymers

    Article • Polymers, September 2021, MDPI AG

    Professor Alejandro J Müller

  129. Crystallization of a Self-Assembling Nucleator in Poly(l-lactide) Melt

    Article • Crystal Growth & Design, September 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  130. Quantifying Nanoparticle Ordering Induced by Polymer Crystallization

    Article • ACS Nano, August 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  131. Competition between Chain Extension and Crosslinking in Polyamide 1012 during High-Temperature Thermal Treatments as Revealed by Successive Self-Nucleation and Annealing Fractionation

    Article • Macromolecules, August 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  132. Phase Transitions in Poly(vinylidene fluoride)/Polymethylene-Based Diblock Copolymers and Blends

    Article • Polymers, July 2021, MDPI AG

    Professor Alejandro J Müller

  133. Sequential Crystallization and Multicrystalline Morphology in PE-b-PEO-b-PCL-b-PLLA Tetrablock Quarterpolymers

    Article • Macromolecules, July 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  134. Solid–Solid Crystal Transitions (δ to α) in Poly(hexamethylene carbonate) and Poly(octamethylene carbonate)

    Article • Macromolecules, July 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  135. Confined Crystallization of Polymers within Nanopores

    Article • Accounts of Chemical Research, July 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  136. Synthesis, Structure, Crystallization and Mechanical Properties of Isodimorphic PBS-ran-PCL Copolyesters

    Article • Polymers, July 2021, MDPI AG

    Professor Alejandro J Müller

  137. Polyether Single and Double Crystalline Blends and the Effect of Lithium Salt on Their Crystallinity and Ionic Conductivity

    Article • Polymers, June 2021, MDPI AG

    Professor Alejandro J Müller

  138. Continuous Cooling Curve Diagrams of Isotactic-Polypropylene/Polyethylene Blends: Mutual Nucleating Effects under Fast Cooling Conditions

    Article • Macromolecules, May 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  139. Suppression of the Self-Nucleation Effect of Semicrystalline Polymers by Confinement

    Article • Macromolecules, April 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  140. Revisiting Polymer–Particle Interaction in PEO Solutions

    Article • Langmuir, March 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  141. Direct Relationship between Dispersion and Crystallization Behavior in Poly(ethylene oxide)/Poly(ethylene glycol)-g-Silica Nanocomposites

    Article • Macromolecules, February 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  142. Access to Biorenewable and CO2-Based Polycarbonates from Exovinylene Cyclic Carbonates

    Article • ACS Sustainable Chemistry & Engineering, January 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  143. Polymer Spherulitic Growth Kinetics Mediated by Nanoparticle Assemblies

    Article • Macromolecules, January 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  144. Asymmetric Co-unit Inclusion in Statistical Copolyesters

    Article • Macromolecules, January 2021, American Chemical Society (ACS)

    Professor Alejandro J Müller

  145. Flame retardant polyphosphoester copolymers as solid polymer electrolyte for lithium batteries

    Article • Polymer Chemistry, January 2021, Royal Society of Chemistry

    Professor Alejandro J Müller

  146. Even–Odd Effect in Aliphatic Polycarbonates with Different Chain Lengths: from Poly (Hexamethylene Carbonate) to Poly (Dodecamethylene Carbonate)

    Article • Macromolecules, December 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  147. Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid

    Article • Additive Manufacturing, December 2020, Elsevier

    Professor Alejandro J Müller

  148. Thermo-rheological effects on successful 3D printing of biodegradable polyesters

    Article • Additive Manufacturing, December 2020, Elsevier

    Professor Alejandro J Müller

  149. High trans-Selectivity in Boron-Catalyzed Polymerization of Allylic Arsonium Ylide and its Contribution to Thermal Properties of C3-Polymers

    Article • Macromolecules, December 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  150. Melt Memory Effects in Poly(Butylene Succinate) Studied by Differential Fast Scanning Calorimetry

    Article • Polymers, November 2020, MDPI AG

    Professor Alejandro J Müller

  151. Polymer Crystallization under Confinement by Well-Dispersed Nanoparticles

    Article • Macromolecules, November 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  152. Origin of Transcrystallinity and Nucleation Kinetics in Polybutene-1/Fiber Composites

    Article • Macromolecules, October 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  153. The Effect of the Cooling Rate on the Morphology and Crystallization of Triple Crystalline PE-b-PEO-b-PLLA and PE-b-PCL-b-PLLA Triblock Terpolymers

    Article • ACS Applied Polymer Materials, October 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  154. Renewable and Tough Poly(l-lactic acid)/Polyurethane Blends Prepared by Dynamic Vulcanization

    Article • ACS Omega, October 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  155. Properties of scaffolds prepared by fused deposition modeling of poly(hydroxyalkanoates)

    Article • International Journal of Biological Macromolecules, October 2020, Elsevier

    Professor Alejandro J Müller

  156. Direct identification of three crystalline phases in PEO-b-PCL-b-PLLA triblock terpolymer by In situ hot-stage atomic force microscopy

    Article • Polymer, September 2020, Elsevier

    Professor Alejandro J Müller

  157. SSA fractionation of thermoplastic polyurethanes

    Article • Polymer Crystallization, August 2020, Hindawi Publishing Corporation

    Professor Alejandro J Müller, Ricardo Perez

  158. Nucleation modalities in poly(lactide), poly(butylene succinate), and poly(ε‐caprolactone) ternary blends with partial wetting morphology

    Article • Polymer Crystallization, August 2020, Hindawi Publishing Corporation

    Professor Alejandro J Müller

  159. A tailor-made Successive Self-nucleation and Annealing protocol for the characterization of recycled polyolefin blends

    Article • Polymer, August 2020, Elsevier

    Professor Alejandro J Müller

  160. Competition between nucleation and confinement in the crystallization of poly(ethylene glycol)/ large aspect ratio hectorite nanocomposites

    Article • Polymer, August 2020, Elsevier

    Professor Alejandro J Müller

  161. Editorial for the special issue “Novel aspects of polymer crystallization”

    Article • Polymer, August 2020, Elsevier

    Professor Alejandro J Müller

  162. Crystallization, Orientation, and Solid–Solid Crystal Transition of Polybutene-1 Confined within Nanoporous Alumina

    Article • Macromolecules, July 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  163. Effect of Nanoconfinement on the Isodimorphic Crystallization of Poly(butylene succinate-ran-caprolactone) Random Copolymers

    Article • Macromolecules, July 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  164. Heterogeneous Nucleation and Self-Nucleation of Isotactic Polypropylene Microdroplets in Immiscible Blends: From Nucleation to Growth-Dominated Crystallization

    Article • Macromolecules, July 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  165. Effect of the Crystallization Conditions on the Exclusion/Inclusion Balance in Biodegradable Poly(butylene succinate-ran-butylene adipate) Copolymers

    Article • Biomacromolecules, July 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  166. Mechanisms of Directional Polymer Crystallization

    Article • ACS Macro Letters, June 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  167. Chemical Structure Drives Memory Effects in the Crystallization of Homopolymers

    Article • Macromolecules, June 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  168. Partitioning of the components into two-demixed-macrophases from a solution blend emulating high impact polystyrene close to the phase inversion region

    Article • Polymer, June 2020, Elsevier

    Professor Alejandro J Müller

  169. Self-Nucleation Effects on Polymer Crystallization

    Article • Macromolecules, May 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  170. High Lithium Conductivity of Miscible Poly(ethylene oxide)/Methacrylic Sulfonamide Anionic Polyelectrolyte Polymer Blends

    Article • Macromolecules, May 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  171. Polymorphism and Multiple Melting Behavior of Bio-Based Poly(propylene 2,5-furandicarboxylate)

    Article • Biomacromolecules, April 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  172. Interphase Design of Cellulose Nanocrystals/Poly(hydroxybutyrate-ran-valerate) Bionanocomposites for Mechanical and Thermal Properties Tuning

    Article • Biomacromolecules, March 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  173. Nucleation of Poly(lactide) Partially Wet Droplets in Ternary Blends with Poly(butylene succinate) and Poly(ε-caprolactone)

    Article • Macromolecules, February 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  174. Synthesis, Structure, and Crystallization Behavior of Amphiphilic Heteroarm Molecular Brushes with Crystallizable Poly(ethylene oxide) and n-Alkyl Side Chains

    Article • Macromolecules, February 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  175. Fully Reversible Spherulitic Morphology in Cationically Photopolymerized DGEBA/PCL Shape-Memory Blends

    Article • Macromolecules, February 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  176. Influence of Chemical Structures on Isodimorphic Behavior of Three Different Copolycarbonate Random Copolymer Series

    Article • Macromolecules, January 2020, American Chemical Society (ACS)

    Professor Alejandro J Müller

  177. ROP and crystallization behaviour of partially renewable triblock aromatic-aliphatic copolymers derived from L-lactide

    Article • European Polymer Journal, January 2020, Elsevier

    Professor Alejandro J Müller

  178. 4-Miktoarm star architecture induces PVDF β-phase formation in (PVDF)2-b-(PEO)2 miktoarm star copolymers

    Article • Journal of Materials Chemistry C, January 2020, Royal Society of Chemistry

    Professor Alejandro J Müller

  179. Effect of Core Nanostructure on the Thermomechanical Properties of Soft Nanoparticles

    Article • Chemistry of Materials, December 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller, Bilen Emek Abali

  180. Controlling the Isothermal Crystallization of Isodimorphic PBS-ran-PCL Random Copolymers by Varying Composition and Supercooling

    Article • Polymers, December 2019, MDPI AG

    Professor Alejandro J Müller

  181. The origin of memory effects in the crystallization of polyamides: Role of hydrogen bonding

    Article • Polymer, December 2019, Elsevier

    Professor Alejandro J Müller

  182. Effects of Hairy Nanoparticles on Polymer Crystallization Kinetics

    Article • Macromolecules, November 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  183. How Confinement Affects the Nucleation, Crystallization, and Dielectric Relaxation of Poly(butylene succinate) and Poly(butylene adipate) Infiltrated within Nanoporous Alumina Templates

    Article • Langmuir, November 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  184. The Effect of Titanium Dioxide Surface Modification on the Dispersion, Morphology, and Mechanical Properties of Recycled PP/PET/TiO2 PBNANOs

    Article • Polymers, October 2019, MDPI AG

    Professor Alejandro J Müller

  185. Nucleation and Crystallization of PA6 Composites Prepared by T-RTM: Effects of Carbon and Glass Fiber Loading

    Article • Polymers, October 2019, MDPI AG

    Professor Alejandro J Müller

  186. Tailoring the isothermal crystallization kinetics of isodimorphic poly (butylene succinate-ran-butylene azelate) random copolymers by changing composition

    Article • Polymer, October 2019, Elsevier

    Professor Alejandro J Müller

  187. Effect of shear rate and pressure on the crystallization of PP nanocomposites and PP/PET polymer blend nanocomposites

    Article • Polymer, October 2019, Elsevier

    Professor Alejandro J Müller

  188. Effects and limits of highly efficient nucleating agents in thermoplastic polyurethane

    Article • Polymer, October 2019, Elsevier

    Professor Alejandro J Müller

  189. Generating Triple Crystalline Superstructures in Melt Miscible PEO‐ b ‐PCL‐ b ‐PLLA Triblock Terpolymers by Controlling Thermal History and Sequential Crystallization

    Article • Macromolecular Chemistry and Physics, September 2019, Wiley

    Professor Alejandro J Müller

  190. Segmental Dynamics Govern the Cold Crystallization of Poly(lactic acid) in Nanoporous Alumina

    Article • Macromolecules, September 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  191. Organocatalyzed Polymerization of PET-mb-poly(oxyhexane) Copolymers and Their Self-Assembly into Double Crystalline Superstructures

    Article • Macromolecules, August 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  192. Crystallization Kinetics of Poly(ethylene oxide) under Confinement in Nanoporous Alumina Studied by in Situ X-ray Scattering and Simulation

    Article • Langmuir, August 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  193. Nucleation of Poly(lactide) on the Surface of Different Fibers

    Article • Macromolecules, August 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  194. Crystallization kinetics as a sensitive tool to detect degradation in poly(lactide)/poly(ε-caprolactone)/ PCL-co-PC copolymers blends

    Article • Polymer Degradation and Stability, August 2019, Elsevier

    Professor Alejandro J Müller

  195. The effect of composition on the rheological behavior of commercial chocolates

    Article • LWT, August 2019, Elsevier

    Professor Alejandro J Müller

  196. Elaboration and Characterization of Conductive Polymer Nanocomposites with Potential Use as Electrically Driven Membranes

    Article • Polymers, July 2019, MDPI AG

    Professor Alejandro J Müller

  197. Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends

    Article • Thermochimica Acta, July 2019, Elsevier

    Professor Alejandro J Müller

  198. Isomorphic Polyoxyalkylene Copolyethers Obtained by Copolymerization of Aliphatic Diols

    Article • Macromolecules, May 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  199. PET-ran-PLA Partially Degradable Random Copolymers Prepared by Organocatalysis: Effect of Poly(l-lactic acid) Incorporation on Crystallization and Morphology

    Article • ACS Sustainable Chemistry & Engineering, April 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  200. Isothermal Crystallization Kinetics and Morphology of Double Crystalline PCL/PBS Blends Mixed with a Polycarbonate/MWCNTs Masterbatch

    Article • Polymers, April 2019, MDPI AG

    Professor Alejandro J Müller

  201. Nanostructured hybrid fluids of amphiphilic diblock copolymers and surfactant worm-like micelles complexes

    Article • European Polymer Journal, April 2019, Elsevier

    Professor Alejandro J Müller

  202. Effect of Chemical Structure and Salt Concentration on the Crystallization and Ionic Conductivity of Aliphatic Polyethers

    Article • Polymers, March 2019, MDPI AG

    Professor Alejandro J Müller, Leire Meabe

  203. Influence of Chain Primary Structure and Topology (Branching) on Crystallization and Thermal Properties: The Case of Polysulfides

    Article • Macromolecules, February 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  204. Synthesis of Aromatic–Aliphatic Polyesters by Enzymatic Ring Opening Polymerization of Cyclic Oligoesters and their Cyclodepolymerization for a Circular Economy

    Article • February 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  205. Polyether Synthesis by Bulk Self-Condensation of Diols Catalyzed by Non-Eutectic Acid–Base Organocatalysts

    Article • ACS Sustainable Chemistry & Engineering, February 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  206. Correlation between Grafting Density and Confined Crystallization Behavior of Poly(ethylene glycol) Grafted to Silica

    Article • Macromolecules, February 2019, American Chemical Society (ACS)

    Professor Alejandro J Müller

  207. How cyclic chain topology can reduce the crystallization rate of poly(3-hexylthiophene) and promote the formation of liquid crystalline phases in comparison with linear analogue chains

    Article • Journal of Materials Chemistry C, January 2019, Royal Society of Chemistry

    Professor Alejandro J Müller

  208. Effect of hydrogen bonding on the physicochemical and rheological features of chemically modified phenoxy

    Article • Polymer, December 2018, Elsevier

    Professor Alejandro J Müller

  209. Tuning the Thermal Properties and Morphology of Isodimorphic Poly[(butylene succinate)-ran-(ε-caprolactone)] Copolyesters by Changing Composition, Molecular Weight, and Thermal History

    Article • Macromolecules, November 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  210. Uniaxial and Mixed Orientations of Poly(ethylene oxide) in Nanoporous Alumina Studied by X-ray Pole Figure Analysis

    Article • Macromolecules, November 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  211. Influence of soft block crystallization on microstructural variation of double crystalline poly(ether-mb -amide) multiblock copolymers

    Article • Polymer Crystallization, October 2018, Wiley

    Prof. Xia Dong, Professor Alejandro J Müller

  212. Novel Biobased Polyamide 410/Polyamide 6/CNT Nanocomposites

    Article • Polymers, September 2018, MDPI AG

    Professor Alejandro J Müller

  213. Polyethylene terephthalate/low density polyethylene/titanium dioxide blend nanocomposites: Morphology, crystallinity, rheology, and transport properties

    Article • Journal of Applied Polymer Science, August 2018, Wiley

    Professor Alejandro J Müller

  214. Promotion of Self-Nucleation with Latent Form I Nuclei in Polybutene-1 and Its Copolymer

    Article • Macromolecules, August 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  215. Special issue on Polymer Crystallization

    Article • European Polymer Journal, August 2018, Elsevier

    Professor Alejandro J Müller

  216. CO2 Selective PolyActive Membrane: Thermal Transitions and Gas Permeance as a Function of Thickness

    Article • ACS Applied Materials & Interfaces, July 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  217. Thermal degradation of high-impact polystyrene with pro-oxidant additives

    Article • Polymer Bulletin, July 2018, Springer Science + Business Media

    Professor Alejandro J Müller

  218. Unexpected Synthesis of Segmented Poly(hydroxyurea–urethane)s from Dicyclic Carbonates and Diamines by Organocatalysis

    Article • Macromolecules, July 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  219. Screening of different organocatalysts for the sustainable synthesis of PET

    Article • European Polymer Journal, July 2018, Elsevier

    Professor Alejandro J Müller

  220. Polymer crystallinity and crystallization kinetics via benchtop 1H NMR relaxometry: Revisited method, data analysis, and experiments on common polymers

    Article • Polymer, June 2018, Elsevier

    Professor Alejandro J Müller

  221. Differences between Isotropic and Self-Nucleated PCL Melts Detected by Dielectric Experiments

    Article • Macromolecules, May 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  222. Differential scanning calorimetry study of cross-nucleation between polymorphs in isotactic poly(1-butene)

    Article • Polymer International, May 2018, Wiley

    Professor Alejandro J Müller

  223. Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(Butylene Succinate) Mixed with a Polycarbonate/MWCNT Masterbatch

    Article • Polymers, April 2018, MDPI AG

    Professor Alejandro J Müller

  224. Crystallization of isodimorphic aliphatic random copolyesters: Pseudo-eutectic behavior and double-crystalline materials

    Article • European Polymer Journal, April 2018, Elsevier

    Professor Alejandro J Müller

  225. Influence of Chain Topology (Cyclic versus Linear) on the Nucleation and Isothermal Crystallization of Poly(l-lactide) and Poly(d-lactide)

    Article • Macromolecules, February 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  226. Interfacial nucleation in iPP/PB-1 blends promotes the formation of polybutene-1 trigonal crystals

    Article • Polymer, February 2018, Elsevier

    Professor Alejandro J Müller

  227. Crystallization kinetics of polylactide: Reactive plasticization and reprocessing effects

    Article • Polymer Degradation and Stability, February 2018, Elsevier

    Professor Alejandro J Müller

  228. Rheology of self-nucleated poly(ɛ-caprolactone) melts

    Article • European Polymer Journal, February 2018, Elsevier

    Professor Alejandro J Müller

  229. Reversible Lamellar Periodic Structures Induced by Sequential Crystallization/Melting in PBS-co-PCL Multiblock Copolymer

    Article • Macromolecules, January 2018, American Chemical Society (ACS)

    Professor Alejandro J Müller

  230. Synthesis and characterization of isocyanate-free polyureas

    Article • Green Chemistry, January 2018, Royal Society of Chemistry

    Professor Alejandro J Müller

  231. Organocatalysed depolymerisation of PET in a fully sustainable cycle using thermally stable protic ionic salt

    Article • Green Chemistry, January 2018, Royal Society of Chemistry

    Professor Alejandro J Müller

  232. Ion-macromolecule interactions studied with model polyurethanes

    Article • Journal of Colloid and Interface Science, January 2018, Elsevier

    Professor Alejandro J Müller

  233. Review on PCL, PBS, and PCL/PBS blends containing carbon nanotubes

    Article • eXPRESS Polymer Letters, January 2018, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Alejandro J Müller

  234. Crystallization and Stereocomplexation of PLA-mb-PBS Multi-Block Copolymers

    Article • Polymers, December 2017, MDPI AG

    Professor Alejandro J Müller

  235. Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(ε-caprolactone) Mixed with a Polycarbonate/MWCNTs Masterbatch

    Article • Polymers, December 2017, MDPI AG

    Professor Alejandro J Müller

  236. Thermal and UV degradation of polypropylene with pro-oxidant. Abiotic characterization

    Article • Journal of Applied Polymer Science, December 2017, Wiley

    Professor Alejandro J Müller

  237. How the Complex Interplay between Different Blocks Determines the Isothermal Crystallization Kinetics of Triple-Crystalline PEO-b-PCL-b-PLLA Triblock Terpolymers

    Article • Macromolecules, December 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  238. Crystallization behavior of precision polymers containing azobenzene defects

    Article • European Polymer Journal, December 2017, Elsevier

    Professor Alejandro J Müller

  239. Supernucleation and Orientation of Poly(butylene terephthalate) Crystals in Nanocomposites Containing Highly Reduced Graphene Oxide

    Article • Macromolecules, November 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  240. Reexamining the Crystallization of Poly(ε-caprolactone) and Isotactic Polypropylene under Hard Confinement: Nucleation and Orientation

    Article • Macromolecules, November 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  241. Crystallization kinetics of ethylene- co -propylene rubber/isotactic polypropylene blend investigated via chip-calorimeter measurement

    Article • European Polymer Journal, November 2017, Elsevier

    Professor Alejandro J Müller

  242. Poly(butylene succinate-ran-ε-caprolactone) copolyesters: Enzymatic synthesis and crystalline isodimorphic character

    Article • European Polymer Journal, October 2017, Elsevier

    Professor Alejandro J Müller

  243. Special Issue in: Organocatalyzed polymerizations

    Article • European Polymer Journal, October 2017, Elsevier

    Professor Alejandro J Müller

  244. Clarifying the Origin of Multiple Melting of Segmented Thermoplastic Polyurethanes by Fast Scanning Calorimetry

    Article • Macromolecules, September 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  245. Trilayered Morphology of an ABC Triple Crystalline Triblock Terpolymer

    Article • Macromolecules, September 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  246. Direct Relationship Between Interfacial Microstructure and Confined Crystallization in Poly(Ethylene Oxide)/Silica Composites: The Study of Polymer Molecular Weight Effects

    Article • Journal of Polymer Science Part B Polymer Physics, August 2017, Wiley

    Professor Alejandro J Müller

  247. Nucleating efficiency and thermal stability of industrial non-purified lignins and ultrafine talc in poly(lactic acid) (PLA)

    Article • Polymer Degradation and Stability, August 2017, Elsevier

    Professor Alejandro J Müller

  248. Competition between supernucleation and plasticization in the crystallization and rheological behavior of PCL/CNT-based nanocomposites and nanohybrids

    Article • Journal of Polymer Science Part B Polymer Physics, June 2017, Wiley

    Professor Alejandro J Müller, Maria Luisa Arnal

  249. Self-Associated Polyamide Alloys with Tailored Polymorphism Transition and Lamellar Thickening for Advanced Mechanical Application

    Article • ACS Applied Materials & Interfaces, May 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  250. Polycondensation as a Versatile Synthetic Route to Aliphatic Polycarbonates for Solid Polymer Electrolytes

    Article • Electrochimica Acta, May 2017, Elsevier

    Leire Meabe, Professor Alejandro J Müller

  251. The effect of microstructural evolution during deformation on the post-yielding behavior of self-associated polyamide blends

    Article • Polymer, May 2017, Elsevier

    Professor Alejandro J Müller

  252. The effect of the solvent employed in the synthesis of hydrogels of poly (acrylamide-co-methyl methacrylate) on their structure, properties and possible biomedical applications

    Article • European Polymer Journal, March 2017, Elsevier

    Professor Alejandro J Müller

  253. The Complex Amorphous Phase in Poly(butylene succinate-ran-butylene azelate) Isodimorphic Copolyesters

    Article • Macromolecules, February 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  254. Tailoring the Structure, Morphology, and Crystallization of Isodimorphic Poly(butylene succinate-ran-butylene adipate) Random Copolymers by Changing Composition and Thermal History

    Article • Macromolecules, January 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  255. Thermorheologically Complex Self-Seeded Melts of Propylene–Ethylene Copolymers

    Article • Macromolecules, January 2017, American Chemical Society (ACS)

    Professor Alejandro J Müller

  256. Probing into the epitaxial crystallization of β form isotactic polypropylene: From experimental observations to molecular mechanics computation

    Article • Journal of Polymer Science Part B Polymer Physics, January 2017, Wiley

    Prof. Xia Dong, Professor Guoming Liu, Professor Alejandro J Müller

  257. Can poly(ε-caprolactone) crystals nucleate glassy polylactide?

    Article • CrystEngComm, January 2017, Royal Society of Chemistry

    Professor Alejandro J Müller

  258. Influence of composition on the isothermal crystallisation of segmented thermoplastic polyurethanes

    Article • CrystEngComm, January 2017, Royal Society of Chemistry

    Professor Alejandro J Müller

  259. Tailoring the properties of PP/PA6 nanostructured blends by the addition of nanosilica and compatibilizer agents

    Article • European Polymer Journal, December 2016, Elsevier

    Professor Alejandro J Müller

  260. Dielectric, mechanical and transport properties of bisphenol A polycarbonate/graphene nanocomposites prepared by melt blending

    Article • Journal of Applied Polymer Science, November 2016, Wiley

    Professor Alejandro J Müller

  261. Structural Transitions in Solution-Cast Films of a New AABB Type Thiophene Copolymer

    Article • Macromolecules, November 2016, American Chemical Society (ACS)

    Professor Alejandro J Müller

  262. Tailoring the Morphology and Melting Points of Segmented Thermoplastic Polyurethanes by Self-Nucleation

    Article • Macromolecules, October 2016, American Chemical Society (ACS)

    Professor Alejandro J Müller

  263. Linear and non-linear rheological behavior of polypropylene/polyamide blends modified with a compatibilizer agent and nanosilica and its relationship with the morphology

    Article • European Polymer Journal, October 2016, Elsevier

    Professor Alejandro J Müller

  264. Oil-based self-degradable gels as diverting agents for oil well operations

    Article • Journal of Petroleum Science and Engineering, October 2016, Elsevier

    Professor Alejandro J Müller

  265. The influence of paraffin wax addition on the isothermal crystallization of LLDPE

    Article • Journal of Applied Polymer Science, September 2016, Wiley

    Professor Alejandro J Müller

  266. Synthesis and Characterization of Double Crystalline Cyclic Diblock Copolymers of Poly(ε-caprolactone) and Poly(l(d)-lactide) (c(PCL-b- PL(D)LA))

    Article • Macromolecular Rapid Communications, August 2016, Wiley

    Professor Alejandro J Müller

  267. Application of SSA thermal fractionation and X-ray diffraction to elucidate comonomer inclusion or exclusion from the crystalline phases in poly(butylene succinate-ran-butylene azelate) random copolymers

    Article • Journal of Polymer Science Part B Polymer Physics, August 2016, Wiley

    Professor Alejandro J Müller

  268. Effect of sugar addition on glass transition temperatures of cassava starch with low to intermediate moisture contents

    Article • Carbohydrate Polymers, August 2016, Elsevier

    Professor Alejandro J Müller

  269. Introduction to the special issue on “Applications of synchrotron radiation in polymers science”

    Article • European Polymer Journal, August 2016, Elsevier

    Professor Alejandro J Müller

  270. New Double-Infiltration Methodology to Prepare PCL–PS Core–Shell Nanocylinders Inside Anodic Aluminum Oxide Templates

    Article • Langmuir, July 2016, American Chemical Society (ACS)

    Professor Alejandro J Müller

  271. Probing the early stages of thermal fractionation by successive self-nucleation and annealing performed with fast scanning chip-calorimetry

    Article • Journal of Polymer Science Part B Polymer Physics, July 2016, Wiley

    Professor Alejandro J Müller

  272. New habits in branched polyethylene single crystals

    Article • European Polymer Journal, July 2016, Elsevier

    Professor Alejandro J Müller

  273. Non-monotonic molecular weight dependence of crystallization rates of linear and cyclic poly(epsilon-caprolactone)s in a wide temperature range

    Article • Polymer International, June 2016, Wiley

    Professor Alejandro J Müller

  274. Hydrolytic degradation of nanocomposites based on poly(l-lactic acid) and layered double hydroxides modified with a model drug

    Article • Journal of Applied Polymer Science, April 2016, Wiley

    Professor Alejandro J Müller

  275. Hierarchically Diminishing Chirality Effects on Lamellar Assembly in Spherulites Comprising Chiral Polymers

    Article • Macromolecules, March 2016, American Chemical Society (ACS)

    Professor Alejandro J Müller

  276. Plasticization and cocrystallization in L LDPE /wax blends

    Article • Journal of Polymer Science Part B Polymer Physics, March 2016, Wiley

    Professor Alejandro J Müller

  277. Confined crystallization of polymeric materials

    Article • Progress in Polymer Science, March 2016, Elsevier

    Professor Alejandro J Müller

  278. Introduction to the “The effects of confinement on polymeric thermal transitions and nanostructuring” Special Volume

    Article • Progress in Polymer Science, March 2016, Elsevier

    Professor Alejandro J Müller

  279. The influence of concentration and pH on the structure and rheology of cationic surfactant/hydrotrope structured fluids

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, January 2016, Elsevier

    Professor Alejandro J Müller

  280. Interplay between poly(ethylene oxide) and poly(l-lactide) blocks during diblock copolymer crystallization

    Article • CrystEngComm, January 2016, Royal Society of Chemistry

    Professor Franck Meyer, Professor Alejandro J Müller

  281. Sequential crystallization and morphology of triple crystalline biodegradable PEO-b-PCL-b-PLLA triblock terpolymers

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Professor Alejandro J Müller

  282. The influence of small amounts of linear polycaprolactone chains on the crystallization of cyclic analogue molecules

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Professor Alejandro J Müller

  283. Plasticization and anti-plasticization effects caused by poly(lactide-ran-caprolactone) addition to double crystalline poly(l-lactide)/poly(ε-caprolactone) blends

    Article • CrystEngComm, January 2016, Royal Society of Chemistry

    Professor Alejandro J Müller

  284. The role of PLLA-g-montmorillonite nanohybrids in the acceleration of the crystallization rate of a commercial PLA

    Article • CrystEngComm, January 2016, Royal Society of Chemistry

    Professor Alejandro J Müller

  285. A complete TSDC description of molecular mobilities in polylactide/starch blends from local to normal modes: Effect of composition, moisture, and crystallinity

    Article • Journal of Polymer Science Part B Polymer Physics, November 2015, Wiley

    Professor Alejandro J Müller

  286. Thermal and tensile properties of corn semolina-protein blends in the glassy state

    Article • Journal of Food Engineering, November 2015, Elsevier

    Professor Alejandro J Müller

  287. The influence of short-chain branching on the morphology and structure of polyethylene single crystals

    Article • Journal of Polymer Science Part B Polymer Physics, October 2015, Wiley

    Professor Guoming Liu, Professor Alejandro J Müller

  288. Dynamic rheology and relaxation time spectra of oil-based self-degradable gels

    Article • Journal of Polymer Science Part B Polymer Physics, October 2015, Wiley

    Professor Alejandro J Müller

  289. Nucleation, Crystallization, and Thermal Fractionation of Poly (ε-Caprolactone)-Grafted-Lignin: Effects of Grafted Chains Length and Lignin Content

    Article • Journal of Polymer Science Part B Polymer Physics, September 2015, Wiley

    Professor Alejandro J Müller

  290. The outstanding ability of nanosilica to stabilize dispersions of Nylon 6 droplets in a polypropylene matrix

    Article • Journal of Polymer Science Part B Polymer Physics, July 2015, Wiley

    Professor Alejandro J Müller

  291. Evolution of Crystal Orientation in One-Dimensionally Confined Space Templated by Lamellae-Forming Block Copolymers

    Article • Macromolecules, July 2015, American Chemical Society (ACS)

    Professor Alejandro J Müller

  292. Self-assembly of semicrystalline PE-b-PS diblock copolymers within AAO nanoporous templates

    Article • Polymer, July 2015, Elsevier

    Professor Alejandro J Müller

  293. Enhanced Crystallization from the Glassy State of Poly( l -lactic acid) Confined in Anodic Alumina Oxide Nanopores

    Article • Macromolecules, April 2015, American Chemical Society (ACS)

    Professor Guoming Liu, Professor Alejandro J Müller

  294. Successive Self-nucleation and Annealing (SSA): Correct design of thermal protocol and applications

    Article • European Polymer Journal, April 2015, Elsevier

    Professor Alejandro J Müller

  295. Comparing crystallization rates between linear and cyclic poly(epsilon-caprolactones) via fast-scan chip-calorimeter measurements

    Article • Polymer, April 2015, Elsevier

    Professor Alejandro J Müller

  296. Fifty years of polymer science

    Article • European Polymer Journal, April 2015, Elsevier

    Professor Alejandro J Müller

  297. How Composition Determines the Properties of Isodimorphic Poly(butylene succinate- ran -butylene azelate) Random Biobased Copolymers: From Single to Double Crystalline Random Copolymers

    Article • Macromolecules, January 2015, American Chemical Society (ACS)

    Professor Alejandro J Müller, Professor Guoming Liu

  298. Degradation of styrene butadiene rubber (SBR) in anaerobic conditions

    Article • Polymer Degradation and Stability, January 2015, Elsevier

    Professor Alejandro J Müller

  299. Crystallization of Cyclic Polymers

    Article • January 2015, Springer Science + Business Media

    Professor Alejandro J Müller

  300. Self-Nucleation of Crystalline Phases Within Homopolymers, Polymer Blends, Copolymers, and Nanocomposites

    Article • January 2015, Springer Science + Business Media

    Professor Alejandro J Müller

  301. Influence of Chain Branching and Molecular Weight on Melt Rheology and Crystallization of Polyethylene/Carbon Nanotube Nanocomposites

    Article • Macromolecules, August 2014, American Chemical Society (ACS)

    Professor Alejandro J Müller

  302. Confined crystallization of polymers within anodic aluminum oxide templates

    Article • Journal of Polymer Science Part B Polymer Physics, July 2014, Wiley

    Professor Alejandro J Müller

  303. Nucleation, crystallization, self-nucleation and thermal fractionation of cyclic and linear poly(ε-caprolactone)s

    Article • Reactive and Functional Polymers, July 2014, Elsevier

    Professor Alejandro J Müller

  304. Computer simulations of the early stages of crystal nucleation of linear and short chain branched polyethylene on carbon nanotubes

    Article • European Polymer Journal, July 2014, Elsevier

    Professor Alejandro J Müller

  305. Nucleation and Antinucleation Effects of Functionalized Carbon Nanotubes on Cyclic and Linear Poly(ε-caprolactones)

    Article • Macromolecules, June 2014, American Chemical Society (ACS)

    Professor Alejandro J Müller

  306. Glass transitions and physical aging of cassava starch – Corn oil blends

    Article • Carbohydrate Polymers, May 2014, Elsevier

    Professor Alejandro J Müller

  307. Crystallization behavior of polyethylene/polystyrene AmBnmiktoarm star copolymers

    Article • Polymers for Advanced Technologies, April 2014, Wiley

    Professor Alejandro J Müller

  308. Relaxation time spectra from short frequency range small-angle dynamic rheometry

    Article • Rheologica Acta, April 2014, Springer Science + Business Media

    Professor Alejandro J Müller

  309. Confinement Induced First Order Crystallization Kinetics for the Poly(ethylene oxide) Block within A PEO-b -PB Diblock Copolymer Infiltrated within Alumina Nano-Porous Template

    Article • Macromolecular Symposia, March 2014, Wiley

    Professor Alejandro J Müller

  310. Kinetics of Cross-Nucleation in Isotactic Poly(1-butene)

    Article • Macromolecules, January 2014, American Chemical Society (ACS)

    Professor Alejandro J Müller

  311. Self-nucleation of isotactic poly(1-butene) in the trigonal modification

    Article • Polymer, January 2014, Elsevier

    Professor Alejandro J Müller

  312. Stereocomplexation of Polylactide Enhanced by Poly(methyl methacrylate): Improved Processability and Thermomechanical Properties of Stereocomplexable Polylactide-Based Materials

    Article • ACS Applied Materials & Interfaces, November 2013, American Chemical Society (ACS)

    Professor Alejandro J Müller

  313. Anti-plasticization of cassava starch by complexing fatty acids

    Article • Carbohydrate Polymers, October 2013, Elsevier

    Professor Alejandro J Müller

  314. Monitoring abiotic degradation of branched polyethylenes formulated with pro-oxidants through different mechanical tests

    Article • Polymer Degradation and Stability, September 2013, Elsevier

    Professor Alejandro J Müller

  315. On cross- and self-nucleation in seeded crystallization of isotactic poly(1-butene)

    Article • Polymer, August 2013, Elsevier

    Professor Alejandro J Müller

  316. The influence of nanosilica on the nucleation, crystallization and tensile properties of PP–PC and PP–PA blends

    Article • Polymer, July 2013, Elsevier

    Professor Alejandro J Müller

  317. Confinement effects on polymer crystallization: From droplets to alumina nanopores

    Article • Polymer, July 2013, Elsevier

    Professor Alejandro J Müller

  318. Thermal, structural and rheological characteristics of dark chocolate with different compositions

    Article • Journal of Food Engineering, May 2013, Elsevier

    Professor Alejandro J Müller

  319. Abiotic degradation of LDPE and LLDPE formulated with a pro-oxidant additive

    Article • Polymer Degradation and Stability, February 2013, Elsevier

    Professor Alejandro J Müller

  320. Instability of styrene/polystyrene/polybutadiene/polystyrene-b -polybutadiene emulsions that emulate styrene polymerization in the presence of polybutadiene

    Article • Polymer Engineering & Science, January 2013, Wiley

    Professor Alejandro J Müller

  321. New insights on the crystallization and melting of cyclic PCL chains on the basis of a modified Thomson–Gibbs equation

    Article • Polymer, January 2013, Elsevier

    Professor Alejandro J Müller

  322. Novel poly(ester-urethane)s based on polylactide: From reactive extrusion to crystallization and thermal properties

    Article • Polymer, November 2012, Elsevier

    Professor Alejandro J Müller

  323. Effect of two different lipid sources on glass transition temperatures and tensile properties of corn semolina

    Article • Journal of Food Engineering, November 2012, Elsevier

    Professor Alejandro J Müller

  324. The Crystallization of Confined Polymers and Block Copolymers Infiltrated Within Alumina Nanotube Templates

    Article • Macromolecules, February 2012, American Chemical Society (ACS)

    Professor Alejandro J Müller

  325. Supernucleation and crystallization regime change provoked by MWNT addition to poly(ε-caprolactone)

    Article • Polymer, February 2012, Elsevier

    Professor Alejandro J Müller

  326. Glass transition temperatures of cassava starch–whey protein concentrate systems at low and intermediate water content

    Article • Carbohydrate Polymers, January 2012, Elsevier

    Professor Alejandro J Müller

  327. Isothermal Cold-Crystallization of PLA/PBAT Blends With and Without the Addition of Acetyl Tributyl Citrate

    Article • Macromolecular Chemistry and Physics, December 2011, Wiley

    Professor Alejandro J Müller

  328. Single crystals morphology of biodegradable double crystalline PLLA-b-PCL diblock copolymers

    Article • Polymer, October 2011, Elsevier

    Professor Alejandro J Müller

  329. Orthogonal Crystal Orientation in Double-Crystalline Block Copolymer

    Article • Macromolecules, September 2011, American Chemical Society (ACS)

    Professor Alejandro J Müller

  330. Crystallization and stereocomplexation behavior of poly(D - and L -lactide)-b -poly(N ,N -dimethylamino-2-ethyl methacrylate) block copolymers

    Article • Journal of Polymer Science Part B Polymer Physics, August 2011, Wiley

    Professor Alejandro J Müller

  331. SAXS/DSC Analysis of the Lamellar Thickness Distribution on a SSA Thermally Fractionated Model Polyethylene

    Article • Macromolecular Chemistry and Physics, July 2011, Wiley

    Professor Alejandro J Müller

  332. Shear-thickening behavior of high molecular weight poly(ethylene oxide) solutions

    Article • Rheologica Acta, July 2011, Springer Science + Business Media

    Professor Alejandro J Müller

  333. Effects of corn oil on glass transition temperatures of cassava starch

    Article • Carbohydrate Polymers, July 2011, Elsevier

    Professor Alejandro J Müller

  334. Evaluation of the potential of novel PCL-PPDX biodegradable scaffolds as support materials for cartilage tissue engineering

    Article • Journal of Tissue Engineering and Regenerative Medicine, May 2011, Wiley

    Professor Alejandro J Müller

  335. New dendronized polymers from acrylate Behera amine and their ability to produce visco-elastic structured fluids when mixed with CTAT worm-like micelles

    Article • Journal of Colloid and Interface Science, May 2011, Elsevier

    Professor Alejandro J Müller

  336. Universality and Percolation in Biodegradable Poly(ε-caprolactone)/Multiwalled Carbon Nanotube Nanocomposites from Broad Band Alternating and Direct Current Conductivity at Various Temperatures

    Article • Macromolecules, April 2011, American Chemical Society (ACS)

    Professor Alejandro J Müller

  337. The Influence of Blend Morphology (Co-Continuous or Sub-Micrometer Droplets Dispersions) on the Nucleation and Crystallization Kinetics of Double Crystalline Polyethylene/Polyamide Blends Prepared by Reactive Extrusion

    Article • Macromolecular Chemistry and Physics, April 2011, Wiley

    Professor Alejandro J Müller

  338. A Comparative Study on the Crystallization Behavior of Analogous Linear and Cyclic Poly(ε-caprolactones)

    Article • Macromolecules, April 2011, American Chemical Society (ACS)

    Professor Alejandro J Müller

  339. Determination of Moisture Sorption Characteristics of Oat Flour by Static and Dynamic Techniques with and Without Thymol as an Antimicrobial Agent

    Article • Food Biophysics, April 2011, Springer Science + Business Media

    Professor Alejandro J Müller

  340. Super-nucleation in nanocomposites and confinement effects on the crystallizable components within block copolymers, miktoarm star copolymers and nanocomposites

    Article • European Polymer Journal, April 2011, Elsevier

    Professor Alejandro J Müller

  341. Critical Analysis of the Crystal Orientation Behavior in Polyethylene-Based Crystalline−Amorphous Diblock Copolymer

    Article • The Journal of Physical Chemistry B, March 2011, American Chemical Society (ACS)

    Professor Alejandro J Müller

  342. Lower Critical Ordering Transition of Poly(ethylene oxide)- block -poly(2-vinylpyridine)

    Article • Macromolecules, February 2011, American Chemical Society (ACS)

    Professor Alejandro J Müller

  343. Shear rheology of anionic and zwitterionic modified polyacrylamides

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, January 2011, Elsevier

    Professor Alejandro J Müller

  344. Use of the successive self-nucleation and annealing technique to characterize 60Co gamma irradiated HDPEs

    Article • Journal of Thermal Analysis and Calorimetry, November 2010, Springer Science + Business Media

    Professor Alejandro J Müller

  345. The effect of hydrophobic modifications on the adsorption isotherms of cassava starch

    Article • Carbohydrate Polymers, July 2010, Elsevier

    Professor Alejandro J Müller

  346. Effect of sequence distribution on the isothermal crystallization kinetics and successive self-nucleation and annealing (SSA) behavior of poly(ε-caprolactone-co-ε-caprolactam) copolymers

    Article • European Polymer Journal, June 2010, Elsevier

    Professor Alejandro J Müller

  347. Crystallization Kinetics and Morphology of Biodegradable Double Crystalline PLLA-b-PCL Diblock Copolymers

    Article • Macromolecules, May 2010, American Chemical Society (ACS)

    Professor Alejandro J Müller

  348. Effect of ionic environment on the rheology of wormlike micelle solutions of mixtures of surfactants with opposite charge

    Article • Journal of Colloid and Interface Science, February 2010, Elsevier

    Professor Alejandro J Müller

  349. Crystallization studies on linear aliphatic n -polyurethanes

    Article • Journal of Polymer Science Part B Polymer Physics, January 2010, Wiley

    Professor Alejandro J Müller

  350. Crystallization and Physical Ageing of Poly (2-vinyl pyridine)-b -poly(ethylene oxide) Diblock Copolymers

    Article • Macromolecular Symposia, January 2010, Wiley

    Professor Hermis Iatrou, Professor Alejandro J Müller

  351. Gelation kinetics of an imitation-mortadella emulsion during heat treatment determined by oscillatory rheometry

    Article • Journal of Food Engineering, December 2009, Elsevier

    Professor Alejandro J Müller

  352. Influence of Macromolecular Architecture on the Crystallization of (PCL 2 )- b -(PS 2 ) 4-Miktoarm Star Block Copolymers in Comparison to Linear PCL- b -PS Diblock Copolymer Analogues

    Article • Macromolecules, November 2009, American Chemical Society (ACS)

    Professor Alejandro J Müller

  353. Effect of Sequence Distribution on the Morphology, Crystallization, Melting, and Biodegradation of Poly(ε-caprolactone- co -ε-caprolactam) Copolymers

    Article • Macromolecules, September 2009, American Chemical Society (ACS)

    Professor Alejandro J Müller

  354. Surface modification of multiwalled carbon nanotubes with biocompatible polymers via ring opening and living anionic surface initiated polymerization. Kinetics and crystallization behavior

    Article • Journal of Polymer Science Part A Polymer Chemistry, September 2009, Wiley

    Dr Dimitrios Priftis, Professor Alejandro J Müller

  355. Thermal Characterization and Phase Behavior of a Ready-to-Eat Breakfast Cereal Formulation and its Starchy Components

    Article • Food Biophysics, August 2009, Springer Science + Business Media

    Professor Alejandro J Müller

  356. Synthesis of amphiphilic dendrons and their interactions in aqueous solutions with cetyltrimethylammonium p-toluenesulfonate (CTAT)

    Article • Journal of Colloid and Interface Science, August 2009, Elsevier

    Professor Alejandro J Müller

  357. Molecular Mobilities in Biodegradable Poly( dl -lactide)/Poly(ε-caprolactone) Blends

    Article • Macromolecules, July 2009, American Chemical Society (ACS)

    Professor Alejandro J Müller

  358. Crystallization studies on linear aliphaticn-polyurethanes

    Article • Journal of Polymer Science Part B Polymer Physics, July 2009, Wiley

    Professor Alejandro J Müller

  359. Rheology, Processing, Tensile Properties, and Crystallization of Polyethylene/Carbon Nanotube Nanocomposites

    Article • Macromolecules, July 2009, American Chemical Society (ACS)

    Professor Alejandro J Müller

  360. Rheological Behavior of Bigrafted Hydrophobically Modified Polyelectrolyte

    Article • Macromolecules, July 2009, American Chemical Society (ACS)

    Professor Alejandro J Müller

  361. Crystallization and morphology of biodegradable or biostable single and double crystalline block copolymers

    Article • Progress in Polymer Science, June 2009, Elsevier

    Professor Alejandro J Müller

  362. Moisture Sorption Characteristics of Starchy Products: Oat Flour and Rice Flour

    Article • Food Biophysics, May 2009, Springer Science + Business Media

    Professor Alejandro J Müller

  363. Synthesis and rheological properties of hydrophobically modified polyacrylamides with lateral chains of poly(propylene oxide) oligomers

    Article • Journal of Colloid and Interface Science, May 2009, Elsevier

    Professor Alejandro J Müller

  364. Primary and secondary dielectric relaxations in semi-crystalline and amorphous starch

    Article • European Polymer Journal, May 2009, Elsevier

    Professor Alejandro J Müller

  365. Glass transition temperatures of a ready to eat breakfast cereal formulation and its main components determined by DSC and DMTA

    Article • Carbohydrate Polymers, May 2009, Elsevier

    Professor Alejandro J Müller

  366. Piezoresistive behavior of epoxy matrix-carbon fiber composites with different reinforcement arrangements

    Article • Journal of Applied Polymer Science, March 2009, Wiley

    Professor Alejandro J Müller

  367. Glass transition temperatures and water sorption isotherms of cassava starch

    Article • Carbohydrate Polymers, March 2009, Elsevier

    Professor Alejandro J Müller

  368. Recent Advances and Applications of “Successive Self-Nucleation and Annealing” (SSA) High Speed Thermal Fractionation

    Article • Macromolecular Symposia, February 2009, Wiley

    Professor Alejandro J Müller

  369. Microwave-assisted modification of starch for compatibilizing LLDPE/starch blends

    Article • Carbohydrate Polymers, January 2009, Elsevier

    Professor Alejandro J Müller

  370. Changes in crystalline morphology, thermal, and mechanical properties with hydrolytic degradation of immiscible biodegradable PPDX/PCL blends

    Article • Journal of Applied Polymer Science, December 2008, Wiley

    Professor Alejandro J Müller

  371. Solutions of xanthan gum/guar gum mixtures: shear rheology, porous media flow, and solids transport in annular flow

    Article • Rheologica Acta, December 2008, Springer Science + Business Media

    Professor Alejandro J Müller

  372. Time effects on the rheological behavior of hydrophobically modified polyacrylamide aqueous solutions mixed with sodium dodecyl sulfate (SDS)

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, December 2008, Elsevier

    Professor Alejandro J Müller

  373. Evaluation of cell affinity on poly(L-lactide) and poly(ε-caprolactone) blends and on PLLA-b-PCL diblock copolymer surfaces

    Article • Journal of Biomedical Materials Research Part A, November 2008, Wiley

    Professor Alejandro J Müller

  374. The effect of NaCl addition on the rheological behavior of cetyltrimethylammonium p-toluenesulfonate (CTAT) aqueous solutions and their mixtures with hydrophobically modified polyacrylamide aqueous solutions

    Article • Rheologica Acta, October 2008, Springer Science + Business Media

    Professor Alejandro J Müller

  375. Shear rheology and porous media flow of wormlike micelle solutions formed by mixtures of surfactants of opposite charge

    Article • Journal of Colloid and Interface Science, October 2008, Elsevier

    Professor Alejandro J Müller

  376. Shear and extensional rheology of solutions of mixtures of poly(ethylene oxide) and anionic surfactants in ionic environments

    Article • Journal of Colloid and Interface Science, October 2008, Elsevier

    Professor Alejandro J Müller

  377. Use of modified poly(ϵ‐caprolactone) in the compatibilization of poly(ϵ‐caprolactone)/maize starch blends

    Article • Journal of Applied Polymer Science, September 2008, Wiley

    Professor Alejandro J Müller

  378. Confined Crystallization and Morphology of Melt Segregated PLLA- b -PE and PLDA- b -PE Diblock Copolymers

    Article • Macromolecules, August 2008, American Chemical Society (ACS)

    Professor Alejandro J Müller

  379. The effect of the ionic strength on the rheological behavior of hydrophobically modified polyacrylamide aqueous solutions mixed with sodium dodecyl sulfate (SDS) or cetyltrimethylammonium p-toluenesulfonate (CTAT)

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, June 2008, Elsevier

    Professor Alejandro J Müller

  380. Synergistic effects in flows of mixtures of wormlike micelles and hydroxyethyl celluloses with or without hydrophobic modifications

    Article • Journal of Colloid and Interface Science, June 2008, Elsevier

    Professor Alejandro J Müller

  381. Crystallization Kinetics of PEO and PE in Different Triblock Terpolymers: Effect of Microdomain Geometry and Confinement

    Article • Macromolecular Chemistry and Physics, March 2008, Wiley

    Professor Alejandro J Müller

  382. Thermal Fractionation and Isothermal Crystallization of Polyethylene Nanocomposites Prepared by in Situ Polymerization

    Article • Macromolecules, March 2008, American Chemical Society (ACS)

    Professor Alejandro J Müller

  383. Fractionated Crystallization and Fractionated Melting of Confined PEO Microdomains in PB- b -PEO and PE- b -PEO Diblock Copolymers

    Article • Macromolecules, February 2008, American Chemical Society (ACS)

    Professor Alejandro J Müller

  384. Estimation of the nucleation and crystal growth contributions to the overall crystallization energy barrier

    Article • Journal of Polymer Science Part B Polymer Physics, January 2008, Wiley

    Professor Alejandro J Müller

  385. Rheological Study of the Shape Transition of Block Copolymer−Nonionic Surfactant Mixed Micelles

    Article • Langmuir, October 2007, American Chemical Society (ACS)

    Professor Alejandro J Müller

  386. Thermal and Morphological Characterization of Nanocomposites Prepared by in-Situ Polymerization of High-Density Polyethylene on Carbon Nanotubes

    Article • Macromolecules, August 2007, American Chemical Society (ACS)

    Professor Alejandro J Müller

  387. Study of Failure Factors for the Collapse of PVDF Pipelines

    Article • Microscopy and Microanalysis, August 2007, Cambridge University Press

    Professor Alejandro J Müller

  388. Nucleation and Isothermal Crystallization of the Polyethylene Block within Diblock Copolymers Containing Polystyrene and Poly(ethylene- alt -propylene)

    Article • Macromolecules, July 2007, American Chemical Society (ACS)

    Professor Alejandro J Müller

  389. Miscibility in poly(L-lactide)- b -poly( $ \upvarepsilon$ -caprolactone) double crystalline diblock copolymers

    Article • The European Physical Journal E, July 2007, Springer Science + Business Media

    Professor Alejandro J Müller

  390. Crystallization, Morphology, and Enzymatic Degradation of Polyhydroxybutyrate/Polycaprolactone (PHB/PCL) Blends

    Article • Macromolecular Chemistry and Physics, May 2007, Wiley

    Professor Alejandro J Müller

  391. DSC isothermal polymer crystallization kinetics measurements and the use of the Avrami equation to fit the data: Guidelines to avoid common problems

    Article • Polymer Testing, April 2007, Elsevier

    Professor Alejandro J Müller

  392. Rheology of aqueous solutions of hydrophobically modified polyacrylamides and surfactants

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, March 2007, Elsevier

    Professor Alejandro J Müller

  393. Effect of ionic strength on the rheological behavior of aqueous cetyltrimethylammonium p-toluene sulfonate solutions

    Article • Journal of Colloid and Interface Science, March 2007, Elsevier

    Professor Alejandro J Müller

  394. Synthesis and Characterization of Novel Linear PB- b -PS- b -PEO and PE- b -PS- b -PEO Triblock Terpolymers

    Article • Macromolecules, February 2007, American Chemical Society (ACS)

    Professor Alejandro J Müller

  395. Effect of temperature, moisture and lipid content on the rheological properties of rice flour

    Article • Journal of Food Engineering, February 2007, Elsevier

    Professor Alejandro J Müller

  396. Synthesis and morphological characterization of miktoarm star copolymers (PCL)2(PS)2 of poly(ɛ-caprolactone) and polystyrene

    Article • Journal of Polymer Science Part A Polymer Chemistry, January 2007, Wiley

    Dr Dimitrios Priftis, Professor Alejandro J Müller

  397. Desarrollo de prótesis de núcleo pulposo — Modelo de elementos finitos de una unidad funcional de la columna vertebral y caracterización de materiales

    Article • January 2007, Springer Science + Business Media

    Professor Alejandro J Müller

  398. Crystallization Kinetics of Homogeneous and Melt Segregated PE Containing Diblock Copolymers

    Article • Macromolecular Symposia, December 2006, Wiley

    Professor Alejandro J Müller

  399. Nucleation and Crystallization of PLDA-b-PE and PLLA-b-PE Diblock Copolymers

    Article • Macromolecular Symposia, October 2006, Wiley

    Professor Alejandro J Müller

  400. Self-Nucleation Behavior of the Polyethylene Block as Function of the Confinement Degree in Polyethylene-Block-Polystyrene Diblock Copolymers

    Article • Macromolecular Symposia, July 2006, Wiley

    Professor Alejandro J Müller

  401. Melt Structure and its Transformation by Sequential Crystallization of the Two Blocks within Poly(L-lactide)-block-Poly(ɛ-caprolactone) Double Crystalline Diblock Copolymers

    Article • Macromolecular Chemistry and Physics, June 2006, Wiley

    Professor Alejandro J Müller

  402. Synthesis and Characterization of Triblock Terpolymers with three Potentially Crystallisable Blocks: Polyethylene-b-poly(ethylene oxide)-b-poly(ɛ-caprolactone)

    Article • Macromolecular Symposia, June 2006, Wiley

    Professor Alejandro J Müller

  403. Confinement effects on the crystallization and SSA thermal fractionation of the PE block within PE-b-PS diblock copolymers

    Article • European Polymer Journal, March 2006, Elsevier

    Professor Alejandro J Müller

  404. High Speed SSA Thermal Fractionation and Limitations to the Determination of Lamellar Sizes and Their Distributions

    Article • Macromolecular Chemistry and Physics, January 2006, Wiley

    Professor Alejandro J Müller

  405. Effect of annealing time on the self-nucleation behavior of semicrystalline polymers

    Article • Journal of Polymer Science Part B Polymer Physics, January 2006, Wiley

    Professor Alejandro J Müller

  406. Effect of isothermal crystallization on the amorphous phase mobility of polycarbonate/poly(ε-caprolactone) blends

    Article • Polymer, August 2005, Elsevier

    Professor Alejandro J Müller

  407. Miscibility and Crystallization in Polycarbonate/Poly(ε-caprolactone) Blends:  Application of the Self-Concentration Model

    Article • Macromolecules, June 2005, American Chemical Society (ACS)

    Professor Alejandro J Müller

  408. Hydrolytic Degradation of Double Crystalline PPDX-b-PCL Diblock Copolymers

    Article • Macromolecular Chemistry and Physics, May 2005, Wiley

    Professor Alejandro J Müller

  409. Thermal fractionation of polymers

    Article • Progress in Polymer Science, May 2005, Elsevier

    Professor Alejandro J Müller

  410. Self-nucleation and crystallization kinetics of double crystalline poly(p-dioxanone)-b-poly(ε-caprolactone) diblock copolymers

    Article • Faraday Discussions, January 2005, Royal Society of Chemistry

    Professor Alejandro J Müller

  411. Optimization of the coordination-insertion ring-opening polymerization of poly(p-dioxanone) by programmed decreasing reaction temperatures

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Professor Alejandro J Müller

  412. Crystallization in Poly( l -lactide)- b -poly(ε-caprolactone) Double Crystalline Diblock Copolymers:  A Study Using X-ray Scattering, Differential Scanning Calorimetry, and Polarized Optical Microscopy

    Article • Macromolecules, January 2005, American Chemical Society (ACS)

    Professor Alejandro J Müller

  413. The role of shear and elongation in the flow of solutions of semi-flexible polymers through porous media

    Article • Rheologica Acta, December 2004, Springer Science + Business Media

    Professor Alejandro J Müller

  414. Non-Newtonian annular vertical flow of sand suspensions in aqueous solutions of guar gum

    Article • Journal of Petroleum Science and Engineering, November 2004, Elsevier

    Professor Alejandro J Müller

  415. Confinement Effects on the Crystallization Kinetics and Self-Nucleation of Double Crystalline Poly(p-dioxanone)-b-poly(ε-caprolactone) Diblock Copolymers

    Article • Macromolecular Symposia, August 2004, Wiley

    Professor Alejandro J Müller

  416. Coincident or sequential crystallization of PCL and PEO blocks within polystyrene-b-poly(ethylene oxide)-b-poly(ε-caprolactone) linear triblock copolymers

    Article • European Polymer Journal, July 2004, Elsevier

    Professor Alejandro J Müller

  417. Effect of the polyethylene confinement and topology on its crystallisation within semicrystalline ABC triblock copolymers

    Article • European Polymer Journal, June 2004, Elsevier

    Professor Alejandro J Müller

  418. Effect of the Flow Field on the Rheological Behavior of Aqueous Cetyltrimethylammonium p -Toluenesulfonate Solutions

    Article • Langmuir, May 2004, American Chemical Society (ACS)

    Professor Alejandro J Müller

  419. Influence of in Vitro Hydrolytic Degradation on the Morphology and Crystallization Behavior of Poly( p -dioxanone)

    Article • Biomacromolecules, March 2004, American Chemical Society (ACS)

    Professor Josee Brisson, Professor Alejandro J Müller

  420. Use of rheological compatibility criteria to study SBS modified asphalts

    Article • Journal of Applied Polymer Science, September 2003, Wiley

    Professor Alejandro J Müller

  421. New comb-like poly(n-alkyl itaconate)s with crystalizable side chains

    Article • Polymer, August 2003, Elsevier

    Professor Alejandro J Müller

  422. Morphology and Crystallization Kinetics of Melt Miscible Polyolefin Blends

    Article • Macromolecular Chemistry and Physics, August 2003, Wiley

    Professor Alejandro J Müller

  423. Nucleation and Crystallization in Double Crystalline Poly( p -dioxanone)- b -poly(ε-caprolactone) Diblock Copolymers

    Article • Macromolecules, March 2003, American Chemical Society (ACS)

    Professor Alejandro J Müller

  424. Dielectric Relaxations in Structurally Disordered Materials

    Article • Radiation Effects and Defects in Solids, January 2003, Taylor & Francis

    Professor Alejandro J Müller

  425. Crystallization in ABC Triblock Copolymers with Two Different Crystalline End Blocks: Influence of Confinement on Self-Nucleation Behavior

    Article • Macromolecular Chemistry and Physics, January 2003, Wiley

    Professor Alejandro J Müller

  426. Synthesis and Characterization of ABC Triblock Copolymers with Two Different Crystalline End Blocks:  Influence of Confinement on Crystallization Behavior and Morphology

    Article • Macromolecules, December 2002, American Chemical Society (ACS)

    Professor Alejandro J Müller

  427. Shear and extensional rheology of solutions of modified hydroxyethyl celluloses and sodium dodecyl sulfate

    Article • Polymer, November 2002, Elsevier

    Professor Alejandro J Müller

  428. Thermal and morphological evaluation of very low density polyethylene/high density polyethylene blends

    Article • Polymer Engineering & Science, October 2002, Wiley

    Professor Alejandro J Müller

  429. From Miscible to Immiscible Polycarbonate/Poly(ε-caprolactone) Blends

    Article • Macromolecules, September 2002, American Chemical Society (ACS)

    Professor Alejandro J Müller

  430. Thermal and self-nucleation behavior of molecular complexes formed by p-nitrophenol and the poly(ethylene oxide) end block within an ABC triblock copolymer

    Article • Macromolecular Symposia, July 2002, Wiley

    Professor Alejandro J Müller

  431. Nucleation and crystallization of PS-b-PEO-b-PCL triblock copolymers

    Article • Macromolecular Symposia, July 2002, Wiley

    Professor Alejandro J Müller

  432. Elongational Flow of Solutions of Poly(ethylene oxide) and Sulfonated Surfactants

    Article • Journal of Colloid and Interface Science, July 2002, Elsevier

    Professor Alejandro J Müller

  433. The effect of hydrolytic degradation on the tensile properties of neat and reinforced Poly(p-dioxanone)

    Article • Polymer Bulletin, May 2002, Springer Science + Business Media

    Professor Alejandro J Müller

  434. Homogeneous Nucleation and Fractionated Crystallization in Block Copolymers †

    Article • Macromolecules, April 2002, American Chemical Society (ACS)

    Professor Alejandro J Müller

  435. Local and segmental dynamics in homopolymer and triblock copolymers with one semicrystalline block

    Article • January 2002, American Physical Society (APS)

    Professor Alejandro J Müller

  436. Effect of ethanol addition on the elongational flow behavior of aqueous solutions of poly(ethylene oxide)

    Article • Polymer Bulletin, January 2002, Springer Science + Business Media

    Professor Alejandro J Müller

  437. Elongational Flow of Solutions Containing Poly(ethylene oxide)/Sodium Dodecyl Sulfate Complexes in the Presence of n-Alkanols

    Article • Journal of Colloid and Interface Science, December 2001, Elsevier

    Professor Alejandro J Müller

  438. Synthesis and Characterization of Polystyrene- b -poly(ethylene oxide)- b -poly(ε-caprolactone) Block Copolymers

    Article • Macromolecules, November 2001, American Chemical Society (ACS)

    Professor Alejandro J Müller

  439. Miscibility of linear and branched polyethylene blends by thermal fractionation: use of the successive self-nucleation and annealing (SSA) technique

    Article • Polymer, July 2001, Elsevier

    Professor Alejandro J Müller

  440. Compatibility Studies in Binary Blends of PA6 and ULDPE-graft-DEM

    Article • Macromolecular Chemistry and Physics, July 2001, Wiley

    Professor Alejandro J Müller

  441. Application of the SSA Calorimetric Technique to Characterise an XLPE Insulator Aged under Multiple Stresses

    Article • Macromolecular Chemistry and Physics, June 2001, Wiley

    Professor Alejandro J Müller

  442. Interactions between Poly(ethylene Oxide) and Sodium Dodecyl Sulfate in Elongational Flows

    Article • Journal of Colloid and Interface Science, April 2001, Elsevier

    Professor Alejandro J Müller

  443. Thermal characterization of polycarbonate/polycaprolactone blends

    Article • Journal of Polymer Science Part B Polymer Physics, January 2001, Wiley

    Professor Alejandro J Müller

  444. Crystallisation and morphology of neat and degraded poly(p-dioxanone)

    Article • Polymer Degradation and Stability, January 2001, Elsevier

    Professor Alejandro J Müller

  445. Flow of mixtures of poly(ethylene oxide) and hydrolyzed polyacrylamide solutions through opposed jets

    Article • Journal of Applied Polymer Science, June 2000, Wiley

    Professor Alejandro J Müller

  446. Influence of the hydrocarbon chain length in the phase transition from solid to liquid-crystal in n-alkylammonium chlorides

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, April 2000, Elsevier

    Professor Alejandro J Müller

  447. Article • Journal of Materials Science, January 2000, Springer Science + Business Media

    Professor Alejandro J Müller

  448. The evaluation of the state of dispersion in immiscible blends where the minor phase exhibits fractionated crystallization

    Article • Polymer Bulletin, September 1995, Springer Science + Business Media

    Professor Alejandro J Müller

  449. Extensional behavior of hydroxypropyl guar solutions: Optical rheometry in opposed jets and flow through porous media

    Article • Journal of Rheology, September 1995, Society of Rheology

    Professor Alejandro J Müller

  450. Turbulence suppression by polymer solutions in opposed jets flow

    Article • AIChE Journal, May 1995, Wiley

    Professor Alejandro J Müller

  451. Calorimetric study of blends of low density polyethylene (LDPE) and linear low density polyethylene (LLDPE) temperature rising elution fractionation (TREF) fractions

    Article • Macromolecular Chemistry and Physics, January 1995, Wiley

    Professor Alejandro J Müller

  452. Flow of solutions of hydroxypropyl guar-poly(ethylene oxide) mixtures through a porous medium

    Article • Polymer Bulletin, November 1994, Springer Science + Business Media

    Professor Alejandro J Müller

  453. Flow of monodisperse polystyrene solutions through porous media

    Article • Colloid & Polymer Science, October 1994, Springer Science + Business Media

    Professor Alejandro J Müller

  454. Homogeneous nucleation of the dispersed crystallisable component of immiscible polymer blends

    Article • Polymer Bulletin, April 1994, Springer Science + Business Media

    Professor Alejandro J Müller

  455. Flow of polymer solutions through porous media

    Article • Journal of Non-Newtonian Fluid Mechanics, September 1993, Elsevier

    Professor Alejandro J Müller

  456. Thermomechanical degradation of macromolecules

    Article • Colloid & Polymer Science, April 1992, Springer Science + Business Media

    Professor Alejandro J Müller

  457. Degradation of semidilute polymer solutions in elongational flows

    Article • Polymer, January 1992, Elsevier

    Professor Alejandro J Müller

  458. Stagnation-point extensional flow behaviour of M1

    Article • Journal of Non-Newtonian Fluid Mechanics, January 1990, Elsevier

    Professor Alejandro J Müller

  459. Non-Newtonian behaviour of hydrolysed polyacrylamide in strong elongational flows: a transient network approach

    Article • Polymer, July 1988, Elsevier

    Professor Alejandro J Müller

  460. Elongational flow and rheology of monodisperse polymers in solution

    Article • Journal of Non-Newtonian Fluid Mechanics, January 1988, Elsevier

    Professor Alejandro J Müller

  461. Entanglements in semi-dilute solutions as revealed by elongational flow studies

    Article • December 1987, Springer Science + Business Media

    Professor Alejandro J Müller

  462. Structure, Properties and Applications of ABA and ABC Triblock Copolymers with Hydrogenated Polybutadiene Blocks

    Article • Wiley

    Professor Alejandro J Müller

  463. Crystallization in Block Copolymers with More than One Crystallizable Block

    Article • Springer Science + Business Media

    Professor Alejandro J Müller

  464. Nucleation and Crystallization in Diblock and Triblock Copolymers

    Article • Springer Science + Business Media

    Professor Alejandro J Müller