All Stories

  1. Defect Tailoring in HfO2/Si Films upon Post Deposition Annealing and Ultraviolet Irradiation
  2. ZnO Nanoparticles by Hydrothermal Method: Synthesis and Characterization
  3. Sustainable, eco-friendly, and cost-effective energy generation based on coffee grounds for self-powered devices and alarm systems
  4. Assessment of Thermal and Physico-Mechanical Properties in Recycled LDPE Composite Reinforced with Prosopis africana Wood Powder
  5. Dynamic Simulation of Water Droplets on Plant Leaves for Sustainable Energy Harvesting in Smart Agriculture
  6. Enhancement of Mechanical Properties In Fiber-Reinforced Epoxy Composites With Luffa Aegyptiaca
  7. Fundamentals of nonlinear sliding velocity in microchannels under non-Newtonian regime
  8. Investigation of Graphene Field-Effect Transistor Behavior Using a Semiclassical Transport Model and Monte Carlo Simulations
  9. Neutral-Point Voltage Interactions on a Medium-Voltage DC-Link
  10. Recent Advances in Organic Photodetectors with Biomedical Applications
  11. Reduction in electronic components for an fNIRS system for monitoring cerebral hemodynamic activity
  12. Stability of a platform support vessel with a crawler crane on its main deck
  13. Microencapsulation of Betalains Extracted from Garambullo (Myrtillocactus geometrizans) to Produce Active Chitosan–Polyvinyl Alcohol Films with Delayed Release of Bioactive Compounds
  14. A Review of Sustainable Pavement Aggregates
  15. Design of Acetaldehyde Gas Sensor Based on Piezoelectric Multilayer Microelectromechanical System Resonator
  16. Recent advances in bioinspired walking microbots: Design, manufacturing, and challenges
  17. Inspection of Semi-Elliptical Defects in a Steel Pipe Using the Metal Magnetic Memory Method
  18. Simplified Models to Assess the Mechanical Performance Parameters of Stents
  19. Green energy harvesting to power electronic devices using portable triboelectric nanogenerator based on waste corn husk and recycled polystyrene
  20. Eco-friendly, compact, and cost-efficient triboelectric nanogenerator for renewable energy harvesting and smart motion sensing
  21. Implementation of a Wireless Sensor Network for Environmental Measurements
  22. Crack detection in metallic materials using a mobile robot
  23. Numerical Analysis and Validation of an Optimized B-Series Marine Propeller Based on NSGA-II Constrained by Cavitation
  24. Simulation and Analysis of Anodized Aluminum Oxide Membrane Degradation
  25. Technological Innovations in the Application of Constructed Wetlands: A Review
  26. Chemically Modified Nanoparticles for Enhanced Antioxidant and Antimicrobial Properties with Cinnamon Essential Oil
  27. A Functional Photoplethysmography Device Measuring Changes in the Auditory Cortex During the Application of Emotional Sound
  28. Electroosmotic Flow of Two Eyring Fluids in a Microchannel Under Non-Newtonian Hydrodynamic Slip Conditions
  29. Simulation, Fabrication and Microfiltration Using Dual Anodic Aluminum Oxide Membrane
  30. Sistema de visión artificial para evaluar cereza de café
  31. ZnO nanorods functionalized with silver nanoparticles for electrochemiluminescence sensors in glyphosate detection
  32. Silver nanoparticles passivated with aniline and their subsequent polymerization using hematin as a catalyst
  33. A Methodology to Assess the Sloshing Effect of Fluid Storage Tanks on the Global Response of FLNG Vessels
  34. Wind Vulnerability of Flexible Outdoor Single-Post Billboards
  35. Evaluation of the Antioxidant and Antimicrobial Potential of SiO2 Modified with Cinnamon Essential Oil (Cinnamomum Verum) for Its Use as a Nanofiller in Active Packaging PLA Films
  36. A Low-Cost Nanostructured Multilayer Piezoelectric Energy Harvester for IoT Devices Using Three-Beam Lead-Free Architecture: A Complete Characterization
  37. A Portable Triboelectric Nanogenerator Based on Dehydrated Nopal Powder for Powering Electronic Devices
  38. Simulations of Magnetic Field Variations Around Rectangular Defects of Ferromagnetic Materials
  39. Modeling of Conduction Mechanisms in Ultrathin Films of Al2O3 Deposited by ALD
  40. Simulation and Detection of Rectangular Magnetic Cracks in Metallic Plates
  41. Solution-processed ZnO energy harvester devices based on flexible substrates
  42. Introducción al análisis y diseño de MEMS
  43. Methodology for the structural analysis of a main deck of FPSO vessel supporting an offshore crane
  44. Triboelectric and Piezoelectric Nanogenerators for Self-Powered Healthcare Monitoring Devices: Operating Principles, Challenges, and Perspectives
  45. The Enhanced Fixed Point Method: An Extremely Simple Procedure to Accelerate the Convergence of the Fixed Point Method to Solve Nonlinear Algebraic Equations
  46. Green Route to Produce Silver Nanoparticles Using the Bioactive Flavonoid Quercetin as a Reducing Agent and Food Anti-Caking Agents as Stabilizers
  47. Recent Progress of Nanogenerators for Green Energy Harvesting: Performance, Applications, and Challenges
  48. Numerical Simulation, Analysis, and Fabrication of MEMS-Based Solid Ag and Cu Microneedles for Biomedical Applications
  49. Structure, morphology, and local photoelectrical characterization of PbS films grown by SILAR
  50. Modified Integral Homotopy Expansive Method to Find Power Series Solutions of Linear Ordinary Differential Equations about Ordinary Points
  51. Análisis estructural de la cubierta principal de un buque de apoyo a plataformas con una grúa sobre orugas
  52. A Self-Powered UHF Passive Tag for Biomedical Temperature Monitoring
  53. Automated Instrument for the Deposition of Thin Films Using Successive Ionic Layer Adsorption and Reaction
  54. Estimation of the Young’s Modulus of Nanometer-Thick Films Using Residual Stress-Driven Bilayer Cantilevers
  55. A Novel CMOS reconfigurable rectifier for wearable piezoelectric energy harvesters
  56. Mobile robot with failure inspection system for ferromagnetic structures using magnetic memory method
  57. EG-ISFET Interface with ADC Conversion and Programmable Calibration
  58. High PSRR Folded Cascode OTA for Neural Signal Applications
  59. An analytical method to model the IDS of the MOSFET transistor using a graphene channel
  60. Numerical analysis from table of offsets in hydrostatic calculations
  61. Triboelectric Energy Harvester Based on Stainless Steel/MoS2 and PET/ITO/PDMS for Potential Smart Healthcare Devices
  62. Numerical and Experimental Analysis of the Effect of a Swirler with a High Swirl Number in a Biogas Combustor
  63. Análisis aerodinámico de un vehículo aéreo no tripulado con forma de halcón para monitoreo de fugas de hidrocarburos
  64. Measurements of the Magnetic Field Variations Related with the Size of V-Shaped Notches in Steel Pipes
  65. Design and modelling of a MEMS for detection of volatile organic compound
  66. Structural Analysis of a Barge Midship Section Considering the Still Water and Wave Load Effects
  67. Sustainable Development of Concrete through Aggregates and Innovative Materials: A Review
  68. Reliability Analysis of Prestressed Concrete Bridges in Mexico: Assessment and Live Load Factors Proposal
  69. Analytical Modeling of the Mechanical Behavior of MEMS/NEMS-Multilayered Resonators with Variable Cross-Sections for Sensors and Energy Harvesters
  70. Synthesis of ZnO Nanorod Film Deposited by Spraying with Application for Flexible Piezoelectric Energy Harvesting Microdevices
  71. Algorithm for automatic detection and measurement of Vickers indentation hardness using image processing
  72. Detection of volatile organic compounds using a commercial gas sensor embedded in a mobile robot
  73. Implicit FEM set up for evaluating FDA mechanical performance parameters on Balloon Expandable Stent
  74. Design of an RLC oscillator based on CMOS technology for gas sensor applications
  75. Analytical modeling of mechanical behavior for MEMS/NEMS-based single-clamped multilayer resonators with symmetrical complex shapes
  76. Electromechanical Modeling of Vibration-Based Piezoelectric Nanogenerator with Multilayered Cross-Section for Low-Power Consumption Devices
  77. Deposition of Multilayer Films of ZnO by Sol-gel Process on Stainless Steel Substrates for Energy Harvesting Devices
  78. Synthesis and Characterization of Thin TiO2 Films Using the Sol-gel dip Coating Method
  79. Analytical Drain Current Model for a-SiGe:H Thin Film Transistors Considering Density of States
  80. FPGA Implementation of Homotopic Path Planning Method with Automatic Assignment of Repulsion Parameter
  81. Optimized Design of a Swirler for a Combustion Chamber of Non-Premixed Flame Using Genetic Algorithms
  82. Surface Evaluation of Photoactivated TiO2 Films
  83. Análisis de la variación del flujo magnético alrededor de defectos rectangulares y triangulares en placas ferromagnéticas
  84. Aerodynamic analysis of an unmanned aerial vehicle with infrared camera for monitoring oil leakage in pipeline networks
  85. Electromechanical Modeling of MEMS-Based Piezoelectric Energy Harvesting Devices for Applications in Domestic Washing Machines
  86. Numerical Predictions of a Swirl Combustor Using Complex Chemistry Fueled with Ammonia/Hydrogen Blends
  87. Recent Progress in Nanomaterials for Modern Concrete Infrastructure: Advantages and Challenges
  88. Biocompatibility and surface properties of hydrogenated amorphous silicon-germanium thin films prepared by LF-PECVD
  89. A Portable and Wireless System for Monitoring Hand Tremors in Parkinson's Disease Patients
  90. Design and Modeling of a Microfluidic Device with Potential Application for Isolation of Circulating Tumor Cells
  91. Development of a Monitoring System for CO/CO2 with Android
  92. Matrix array of CMOS photodetectors for brain transillumination
  93. A handy, accurate, invertible and integrable expression for Dawson’s function
  94. An easy and computable approximation for Troesch’s problem by using the Laplace Transform-Homotopy Perturbation Method
  95. Measurement System of Metal Magnetic Memory Method Signals around Rectangular Defects of a Ferromagnetic Pipe
  96. Design and fabrication of a microelectromechanical system resonator based on two orthogonal silicon beams with integrated mirror for monitoring in-plane magnetic field
  97. Design of a MEMS-Based Piezoelectric Vibration Energy Harvesting Device for Automotive Applications
  98. An Analytical Approximate Solution for the Quasi-Steady State Michaelis-Menten Problem
  99. Electromechanical Modeling of a Piezoelectric Vibration Energy Harvesting Microdevice Based on Multilayer Resonator for Air Conditioning Vents at Office Buildings
  100. PSEM Approximations for Both Branches of Lambert W Function with Applications
  101. Antennas Design for UHF Passive RFID Tags
  102. Design and Modeling of a MEMS Dual-Backplate Capacitive Microphone with Spring-Supported Diaphragm for Mobile Device Applications
  103. Optimized Direct Padé and HPM for Solving Equation of Oxygen Diffusion in a Spherical Cell
  104. Approximation of Fresnel Integrals with Applications to Diffraction Problems
  105. Design of a Novel MEMS Microgripper with Rotatory Electrostatic Comb-Drive Actuators for Biomedical Applications
  106. The study of heat transfer phenomena by using modified homotopy perturbation method coupled by Laplace transform
  107. Design and Modeling of Polysilicon Electrothermal Actuators for a MEMS Mirror with Low Power Consumption
  108. Fabrication of micro-optical magnetic sensor
  109. Mechanical design of a novel MEMS resonant sensor for monitoring in-plane magnetic fields
  110. MEMS Lorentz Force Magnetometers
  111. Recent Advances of MEMS Resonators for Lorentz Force Based Magnetic Field Sensors: Design, Applications and Challenges
  112. Cytotoxicity Evaluation of Anatase and Rutile TiO2 Thin Films on CHO-K1 Cells in Vitro
  113. On a Practical Methodology for Solving BVP Problems by Using a Modified Version of Picard Method
  114. Design and implementation of a system access control by RFID
  115. Analysis of the development of smart sensors based on MEMS devices and smart sensor platform proposal
  116. Portable signal conditioning system of a MEMS magnetic field sensor for industrial applications
  117. RESPUESTA ESTRUCTURAL DE CARTILAGO VISCOELASTICO DE RODILLA EN UN CICLO DE CAMINATA
  118. Mechanical characterization and modelling of Lorentz force based MEMS magnetic field sensors
  119. Reliability analysis sensors based on embedded system
  120. A MEMS-based magnetic field sensor with simple resonant structure and linear electrical response
  121. Fabrication process of a microstructures based on hydrogenated amorphous SiGe films for applications in MEMS devices
  122. Improved Detection of Magnetic Signals by a MEMS Sensor Using Stochastic Resonance
  123. Modified nonlinearities distribution Homotopy Perturbation method as a tool to find power series solutions to ordinary differential equations
  124. Biocompatibility and Surface Properties of TiO2 Thin Films Deposited by DC Magnetron Sputtering
  125. Compliant MEMS mechanism to extend resolution in Fourier transform spectroscopy
  126. A handy approximate solution for a squeezing flow between two infinite plates by using of Laplace transform-homotopy perturbation method
  127. A handy approximation for a mediated bioelectrocatalysis process, related to Michaelis-Menten equation
  128. Modified Taylor series method for solving nonlinear differential equations with mixed boundary conditions defined on finite intervals
  129. Digital Signal Processing by Virtual Instrumentation of a MEMS Magnetic Field Sensor for Biomedical Applications
  130. Experimental performance analysis of a CMOS amplifier considering different layout techniques
  131. Voltage Regulation System for UHF RFID Tags
  132. Laplace transform-homotopy perturbation method as a powerful tool to solve nonlinear problems with boundary conditions defined on finite intervals
  133. Design and modeling of a single-mass biaxial capacitive accelerometer based on the SUMMiT V process
  134. Design and modeling of a novel microsensor to detect magnetic fields in two orthogonal directions
  135. Theoretical Design and Simulation of a Novel 2D Magnetic Field Sensor with Linear Response and Low Power Consumption
  136. Approximations for Large Deflection of a Cantilever Beam under a Terminal Follower Force and Nonlinear Pendulum
  137. Homotopy-continuation Picard method
  138. Respiratory Magnetogram Detected with a MEMS Device
  139. Symbolic analysis and reordering of nonlinear circuit's equations in order to accelerate homotopy simulation
  140. Using perturbation methods and Laplace-Padé approximation to solve nonlinear problems
  141. Signal Conditioning System With a 4–20 mA Output for a Resonant Magnetic Field Sensor Based on MEMS Technology
  142. A General Solution for Troesch's Problem
  143. Alternative Post-Processing on a CMOS Chip to Fabricate a Planar Microelectrode Array
  144. Analytical Modeling for the Bending Resonant Frequency of Multilayered Microresonators with Variable Cross-Section
  145. Analytical Modeling for the Bending Resonant Frequency of Sensors Based on Micro and Nanoresonators With Complex Structural Geometry
  146. Mechanical design and characterization of a resonant magnetic field microsensor with linear response and high resolution
  147. Design, Fabrication, and Characterization of a Resonant Magnetic Field Sensor Based on MEMS Technology
  148. Sensing magnetic flux density of artificial neurons with a MEMS device
  149. Modeling of the intrinsic stress effect on the resonant frequency of NEMS resonators integrated by beams with variable cross-section
  150. Estudio acústico-estructural de la cabina de un vehículo automotriz
  151. Performance optimization and mechanical modeling of uniaxial piezoresistive microaccelerometers
  152. Resonant Magnetic Field Sensors Based On MEMS Technology
  153. A resonant magnetic field microsensor with high quality factor at atmospheric pressure
  154. Los Microacelerómetros en la Actualidad
  155. Mechanical behavior of a novel resonant microstructure for magnetic applications considering the squeeze-film damping
  156. Relationship Between Crystalline Structure and Hardness of Ti-Si-N-O Coatings Fabricated by dc Sputtering
  157. Structure and mechanical properties of TiBN coatings fabricated by dc reactive sputtering technique