All Stories

  1. Effect of variation of egg-shell particulate reinforcement on ultrasonic pulse velocity, attenuation, and hardness prediction in ceramic-metal composites

    Article • Thermal Science, January 2023, National Library of Serbia

    Assoc. Prof. Dr. AHMET YÖNETKEN

  2. Investigation of Diffusion Welding Capability of WC Ceramic Based Ni Doped Composites

    Article • Politeknik Dergisi, October 2022, Gazi University - Technical Education Faculty

    Assoc. Prof. Dr. AHMET YÖNETKEN

  3. Ultrasonic and Mechanical Characterization of Borided Ceramic–Metal Composite

    Article • Russian Journal of Nondestructive Testing, September 2022, Pleiades Publishing Ltd

    Assoc. Prof. Dr. AHMET YÖNETKEN

  4. Investigation of Ultrasonic Attenuation and Hardness Relationship in Ceramic-Metal Composites

    Article • European Journal of Science and Technology, April 2022, European Journal of Science and Technology

    Assoc. Prof. Dr. AHMET YÖNETKEN

  5. Characterization of egg shell powder-doped ceramic–metal composites

    Article • Open Chemistry, January 2022, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  6. Characterization of the elastic modulus of ceramic–metal composites with physical and mechanical properties by ultrasonic technique

    Article • Open Chemistry, January 2022, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  7. Characterization of electroless Ni-coated Fe–Co composite using powder metallurgy

    Article • Open Chemistry, January 2022, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  8. RLBP Metodu ile Mamografi Görüntülerinin İncelenmesi ve Sınıflandırılması

    Article • Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi, December 2021, Kocatepe Medical Journal

    Assoc. Prof. Dr. AHMET YÖNETKEN

  9. Two-Stage Three-Phase Grid-Tied Photovoltaic System with MPPT Method

    Article • Afyon Kocatepe Üniversitesi Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Dergisi, December 2021, Kocatepe Medical Journal

    Assoc. Prof. Dr. AHMET YÖNETKEN

  10. The Effect of Mechanical Properties on the Ultrasonic Velocity Of Ceramic Based Composites Fabricated By Electroless Coating Technique

    Article • European Journal of Science and Technology, November 2021, European Journal of Science and Technology

    Assoc. Prof. Dr. AHMET YÖNETKEN

  11. Investigation of Wear Behavior of Borided Materials Produced by the Powder Metallurgy Method in Different Compositions

    Article • Protection of Metals and Physical Chemistry of Surfaces, July 2021, Pleiades Publishing Ltd

    Assoc. Prof. Dr. AHMET YÖNETKEN

  12. Algılayıcı Türlerinin Güneş Takip Sisteminde Etkinliğinin Araştırılması

    Article • European Journal of Science and Technology, June 2021, European Journal of Science and Technology

    Assoc. Prof. Dr. AHMET YÖNETKEN

  13. DETERMINING PROPERTIES OF NICKEL BASED COMPOSITE THAT REINFORCED BY ELECTROLESS NICEL PLATED BORON NITRIDE AND ASTALOY-CrM POWDERS

    Article • Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, March 2020, Anadolu Universitesi Bilim ve Teknoloji Dergisi-A: Uygulamali Bilimler ve Muhendislik

    Assoc. Prof. Dr. AHMET YÖNETKEN

  14. Sintering and Characterization of SiC Reinforced Ni Powders in Microwave Furnace

    Article • Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, January 2020, Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi

    Assoc. Prof. Dr. AHMET YÖNETKEN

  15. INCUBATION PROPERTIES OF NATIVE GEESE IN TURKEY

    Article • Eskişehir Teknik Üniversitesi Bilim ve Teknoloji Dergisi - C Yaşam Bilimleri Ve Biyoteknoloji, January 2020, Anadolu Universitesi Bilim ve Teknoloji Dergisi C : Yasam Bilimleri ve Biyoteknoloji

    Assoc. Prof. Dr. AHMET YÖNETKEN

  16. Production And Characterization Of Ti-10Cr-3,33Co-3,33Egg Shelter Composite Materials Using By Powder Metallurgy

    Article • Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi, January 2020, Uluslararasi Muhendislik Arastirma ve Gelistirme Dergisi

    Assoc. Prof. Dr. AHMET YÖNETKEN

  17. How Improved to WC Based Hard Materials

    Article • Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, December 2019, Erzincan Universitesi Fen Bilimleri Ensitusu Dergisi

    Assoc. Prof. Dr. AHMET YÖNETKEN

  18. Design and Implementation of P&O Maximum Power Point Tracker Algorithm Based Solar Charge Controller

    Article • International Journal of Applied Mathematics Electronics and Computers, June 2019, International Journal of Applied Mathematics, Electronics and Computers

    Assoc. Prof. Dr. AHMET YÖNETKEN

  19. Comparison of experimentally obtained I-V curves of different PV modules

    Article • March 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Assoc. Prof. Dr. AHMET YÖNETKEN

  20. Investigation Efficiency and Microcontroller-Based Energy Flow Control for Wind-Solar-Fuel Cell Hybrid Energy Generation System with Battery Storage

    Article • Measurement and Control, August 2017, SAGE Publications

    Assoc. Prof. Dr. AHMET YÖNETKEN

  21. Kondansatör Deşarjli Saplama Kaynağı Kaynak Voltunun Aa6082 Alüminyum Alaşımında Birleşmeye Etkisi

    Article • Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, August 2016, Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi

    Assoc. Prof. Dr. AHMET YÖNETKEN

  22. Fabrication of Electroless Ni Plated Fe–Al2O3 Ceramic–Metal Matrix Composites

    Article • Transactions of the Indian Institute of Metals, January 2015, Springer Science + Business Media

    Assoc. Prof. Dr. AHMET YÖNETKEN

  23. Production and wear property of electroless Ni-plated B4C-AstaloyCr-M composites

    Article • Science and Engineering of Composite Materials, January 2015, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  24. Production of Ni-Cr-Ti-natural fibres composite and investigation of mechanical properties

    Article • January 2015, American Institute of Physics

    Assoc. Prof. Dr. AHMET YÖNETKEN

  25. Production of Co–Cr–Ti Composite and Investigation of Mechanical Properties

    Article • Transactions of the Indian Institute of Metals, January 2014, Springer Science + Business Media

    Assoc. Prof. Dr. AHMET YÖNETKEN

  26. Influence of mean grain size with ultrasonic velocity on microhardness of B4C–Fe–Ni composite

    Article • Journal of Alloys and Compounds, October 2013, Elsevier

    Assoc. Prof. Dr. AHMET YÖNETKEN

  27. Characterization and brazing of sintered Ni-Al-Co powder mixtures containing intermetallics

    Article • Science and Engineering of Composite Materials, August 2013, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  28. Mean Grain Size and Pore Effects οn Ultrasonic Properties οf WC-Fe-Ni and SiC-Fe-Ni Composites

    Article • Acta Physica Polonica A, April 2013, Institute of Physics, Polish Academy of Sciences

    Assoc. Prof. Dr. AHMET YÖNETKEN

  29. How composite formation can improve NiAl intermetallics

    Article • Metal Powder Report, September 2011, Elsevier

    Assoc. Prof. Dr. AHMET YÖNETKEN

  30. Diffusion bonding of electroless Ni plated WC composite to Cu and AISI 316 stainless steel

    Article • Materials Science-Poland, March 2011, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  31. Fabrication of electroless Ni plated Fe-TiC metal matrix composites

    Article • Science and Engineering of Composite Materials, January 2011, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  32. Manufacturing microwaved hardmetal composites

    Article • Metal Powder Report, September 2010, Elsevier

    Assoc. Prof. Dr. AHMET YÖNETKEN

  33. The Effect of Microwave Sintering on the Properties of Electroless Ni Plated WC-Fe-Ni Composites

    Article • Science and Engineering of Composite Materials, September 2010, De Gruyter

    Assoc. Prof. Dr. AHMET YÖNETKEN

  34. MW sintering ‘the economic way’ to ceramic reinforced nickel aluminide composites

    Article • Metal Powder Report, February 2009, Elsevier

    Assoc. Prof. Dr. AHMET YÖNETKEN