All Stories

  1. Analysis of operation of blast furnaces’ air tuyere with heat insulation insert in the blow channel

    Article • Metallurgist, September 2025, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  2. Effect of flange design on the performance of a blast furnace air tuyere with heat-insulating insert

    Article • Metallurgist, July 2025, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  3. Methods of reducing the thermal stresses in the heat-insulation lining of blast-furnace tuyere with natural gas supplied through flange holes

    Article • Metallurgist, June 2025, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  4. Study of efficiency of thermal insulation of the outer surface of the blast furnace tuyere

    Article • Chernye Metally, April 2025, Ore and Metals Publishing House

    АЛЕКСАНДР РАДЮК

  5. Temperature and composition of the gas medium at the outlet of the blast furnace tuyere

    Article • Izvestiya Ferrous Metallurgy, November 2022, National University of Science and Technology MISiS

    АЛЕКСАНДР РАДЮК

  6. Effect of Natural Gas Flow Rate and Temperature on the Processes Occurring in a Blast Furnace Air Tuyere with a Heat-Insulating Insert in the Blast Channel

    Article • Steel in Translation, November 2022, Allerton Press

    АЛЕКСАНДР РАДЮК

  7. Improvement of Natural Gas Combustion in the Air Tuyere of a Blast Furnace

    Article • Metallurgist, July 2022, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  8. Investigation of the influence of design parameters on thermal processes in a blast furnace tuyere using ANSYS software

    Article • Izvestiya Ferrous Metallurgy, January 2022, National University of Science and Technology MISiS

    АЛЕКСАНДР РАДЮК

  9. Evaluation of the efficiency of structures of a heat-insulating insert in the blowing channel of the blast furnace air tuyere

    Article • Chernye Metally, December 2021, Ore and Metals Publishing House

    АЛЕКСАНДР РАДЮК

  10. Study of the Effect of Design Parameters on the Thermal Processes in a Blast Furnace Tuyere Using the ANSYS Software

    Article • Steel in Translation, December 2021, Allerton Press

    АЛЕКСАНДР РАДЮК

  11. Increasing the Operational Efficiency of Insulation Liners in the Air Passage of Blast-Furnace Tuyeres

    Article • Metallurgist, July 2021, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  12. Increasing the Resistance of the Heat-Insulating Insert in the Air Tuyere of a Blast Furnace

    Article • Russian Metallurgy (Metally), December 2020, Pleiades Publishing Ltd

    АЛЕКСАНДР РАДЮК

  13. Effect of Slurry Coating on the Resistance of Thermal Insulation Insert in Blast Furnace Air Tuyere

    Article • Metallurgist, March 2020, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  14. Reducing Heat Losses Through Blast Furnace Tuyeres

    Article • Steel in Translation, November 2019, Allerton Press

    АЛЕКСАНДР РАДЮК

  15. Improvements to Mixing of Natural Gas and Hot-Air Blast in the Air Tuyeres of Blast Furnaces with Thermal Insulation of the Blast Duct

    Article • Metallurgist, September 2019, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  16. EFFECT OF A CERAMIC INSERT WITH SWIRLER ON GAS DYNAMICS AND HEAT EXCHANGE IN A BLAST FURNACE TUYERE

    Article • Izvestiya Ferrous Metallurgy, June 2019, National University of Science and Technology MISiS

    АЛЕКСАНДР РАДЮК

  17. Decreasing the Heat Losses at the Air Tuyeres in Blast Furnaces

    Article • Steel in Translation, April 2019, Allerton Press

    АЛЕКСАНДР РАДЮК

  18. Computer Simulation of Thermal and Stress-Strain State of Blast Furnace Tuyeres

    Article • Metallurgist, March 2019, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  19. The Calculation of the Thickness of Thermal Spray Coating for Protection of Low Alloyed Steel when Heated under Rolling

    Article • Materials Science Forum, February 2019, Trans Tech Publications

    Alla Gerasimova, АЛЕКСАНДР РАДЮК

  20. Modeling of the Temperature Field of Air Tuyeres in the Blast Furnaces with Thermal Insulation of the Nose Portion

    Article • Metallurgist, July 2018, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  21. INFLUENCE OF THE METHOD OF NATURAL GAS SUPPLYING ON GAS DYNAMICS AND HEAT TRANSFER IN AIR TUYERE OF BLAST FURNACE

    Article • Izvestiya Ferrous Metallurgy, June 2018, National University of Science and Technology MISiS

    АЛЕКСАНДР РАДЮК

  22. Development of a Method for Calculating the Thickness of Thermal-Spray Aluminum Coating Used to Protect Low-Alloy Steel During Heating for Rolling

    Article • Metallurgist, May 2018, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  23. Research of heat stresses in components of blast furnace tuyere

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    АЛЕКСАНДР РАДЮК

  24. Effect of the Thermal Insulation of the Inner Wall on the Thermal Condition of the Air Tuyeres of Blast Furnaces

    Article • Metallurgist, January 2018, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  25. Computer simulation of temperature field of blast furnaces air tuyere

    Article • Computer Research and Modeling, February 2017, Izhevsk Institute of Computer Science

    АЛЕКСАНДР РАДЮК

  26. Simulation of heat losses and temperature of blast furnaces tuyeres

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    АЛЕКСАНДР РАДЮК

  27. Modeling of the Temperature Field of Blast Furnace Tuyeres Using Deform-2D Software

    Article • Metallurgist, January 2017, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  28. Thermal state of air tuyeres in blast furnaces

    Article • Steel in Translation, September 2016, Allerton Press

    АЛЕКСАНДР РАДЮК

  29. Wear-resistant aluminum and chromonickel coatings at the narrow mold walls in continuous-casting machines

    Article • Steel in Translation, July 2016, Allerton Press

    АЛЕКСАНДР РАДЮК

  30. Experience of application of a heat-resistant coating to protect billets in heating for metal forming

    Article • Russian Metallurgy (Metally), December 2015, Pleiades Publishing Ltd

    АЛЕКСАНДР РАДЮК

  31. Creation of a diffusional aluminum layer on the narrow walls of continuous-casting molds

    Article • Steel in Translation, March 2015, Allerton Press

    АЛЕКСАНДР РАДЮК

  32. Applying Coatings to the Narrow Walls of Continuous-Caster Molds to Improve the Quality of the Surface of Slabs

    Article • Metallurgist, September 2014, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  33. Reducing Heat Loss Through the Surface of Blast-Furnace Tuyeres

    Article • Metallurgist, January 2014, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  34. Improving air-tuyere operation in blast furnaces by means of coatings and sealant

    Article • Steel in Translation, May 2013, Allerton Press

    АЛЕКСАНДР РАДЮК

  35. Blast-furnace lances with a gas-thermal aluminum coating

    Article • Steel in Translation, October 2011, Allerton Press

    АЛЕКСАНДР РАДЮК

  36. Use of electric-arc metallization to recondition the working surfaces of the narrow walls of thick-walled slab molds

    Article • Metallurgist, September 2011, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  37. Improving the temperature conditions in controlled rolling on a TLS 5000 mill

    Article • Steel in Translation, May 2011, Allerton Press

    АЛЕКСАНДР РАДЮК

  38. Improving the properties of a gas-thermal coating by brushing

    Article • Steel in Translation, January 2009, Allerton Press

    АЛЕКСАНДР РАДЮК

  39. The influence of aluminum on the nickel and chromium diffusion into copper during the deposition and thermal treatment of gas-thermal coatings

    Article • Russian Journal of Non-Ferrous Metals, August 2008, Allerton Press

    АЛЕКСАНДР РАДЮК

  40. Structure and phase composition of the surface layer on steel after alitization

    Article • Metal Science and Heat Treatment, May 2008, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК

  41. Application of the gas-thermal covering for increase of service properties of the metallurgical equipment and metal products

    Article • Revue de Métallurgie, May 2007, EDP Sciences

    АЛЕКСАНДР РАДЮК

  42. Using gas-thermal coatings for high-temperature protection of steel

    Article • Steel in Translation, May 2007, Allerton Press

    АЛЕКСАНДР РАДЮК

  43. Composition and properties of the diffusion layer formed upon heat treatment of an aluminum gas-thermal coating on titanium

    Article • Russian Metallurgy (Metally), January 2006, Pleiades Publishing Ltd

    АЛЕКСАНДР РАДЮК

  44. Eliminating Gaps between the Walls of Sectional Continuous-Caster Molds by the Application of Sprayed Metal Coatings

    Article • Metallurgist, September 2005, Springer Science + Business Media

    АЛЕКСАНДР РАДЮК