All Stories

  1. A comparative study on the effectiveness of fly ash and blast furnace slag as partial cement substitution in 3D printable concrete

    Article • Journal of Building Engineering, August 2025, Elsevier

    Dr. Çağlar Yalçınkaya

  2. Development of Sustainable Polymer Composites Containing Waste Glass and Natural Fibers for Strengthening Purposes

    Article • Polymers, April 2025, MDPI AG

    Dr. Çağlar Yalçınkaya

  3. Evaluation of thermal insulation capacity and mechanical performance of a novel low-carbon thermal insulating foam concrete

    Article • Energy and Buildings, November 2024, Elsevier

    Dr. Çağlar Yalçınkaya

  4. Numerical assessment of thermal bridging effects in 3D-printed foam concrete walls

    Article • Materials Research Express, October 2024, Institute of Physics Publishing

    Dr. Çağlar Yalçınkaya

  5. Numerical evaluation of the performance of UHPC beams under bending and shear loads using different material models

    Article • Journal of Structural Engineering & Applied Mechanics, September 2024, Golden Light Publishing

    Dr. Çağlar Yalçınkaya

  6. Effect of silica fume on the performance of high-early-strength UHPC prepared with magnesium ammonium phosphate cement

    Article • Case Studies in Construction Materials, July 2024, Elsevier

    Dr. Çağlar Yalçınkaya

  7. Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls: The Effects of Lattice Type, Filament Width and Granular Filling Material

    Article • Buildings, March 2024, MDPI AG

    Dr. Çağlar Yalçınkaya

  8. Self-healing properties of mortar with crystalline admixture: experimental investigation and parameter optimization

    Article • Smart Materials and Structures, March 2024, Institute of Physics Publishing

    Dr. Çağlar Yalçınkaya

  9. Correction

    Article • Journal of Sustainable Cement-Based Materials, January 2024, Taylor & Francis

    Dr. Çağlar Yalçınkaya

  10. Assessment of self-healing behavior of polypropylene fiber-reinforced cement mortar with crystalline admixture: the effects of crack widths, cracking ages, and external conditions

    Article • Journal of Sustainable Cement-Based Materials, January 2024, Taylor & Francis

    Dr. Çağlar Yalçınkaya

  11. Improving mechanical properties and sustainability of high-strength engineered cementitious composites (ECC) using diatomite

    Article • Matériaux et Constructions, January 2024, Springer Science + Business Media

    Dr. Çağlar Yalçınkaya

  12. Effect of internal curing on shrinkage and cracking potential under autogenous and drying conditions

    Article • Construction and Building Materials, December 2023, Elsevier

    Dr. Çağlar Yalçınkaya

  13. Progressive damage process and destabilization precursor recognition of sulfate tailing-cemented paste backfill based on acoustic emission

    Article • Powder Technology, December 2023, Elsevier

    Dr. Çağlar Yalçınkaya

  14. Review of the materials composition and performance evolution of green alkali-activated cementitious materials

    Article • Clean Technologies and Environmental Policy, January 2023, Springer Science + Business Media

    Dr. Çağlar Yalçınkaya

  15. Effect of curing regime on the immobilization of municipal solid waste incineration fly ash in sustainable cement mortar

    Article • Environmental Pollution, January 2023, Elsevier

    Dr. Çağlar Yalçınkaya

  16. Recycling coral waste into eco-friendly UHPC: Mechanical strength, microstructure, and environmental benefits

    Article • The Science of The Total Environment, August 2022, Elsevier

    Dr. Çağlar Yalçınkaya

  17. Performance of self-compacting concrete incorporating waste glass as coarse aggregate

    Article • Journal of Sustainable Cement-Based Materials, June 2022, Taylor & Francis

    Dr. Çağlar Yalçınkaya

  18. Evaluating the effects of recycled concrete aggregate size and concentration on properties of high-strength sustainable concrete

    Article • Journal of King Saud University - Engineering Sciences, April 2022, Elsevier

    Dr. Çağlar Yalçınkaya

  19. Influence of Hydroxypropyl Methylcellulose Dosage on the Mechanical Properties of 3D Printable Mortars with and without Fiber Reinforcement

    Article • Buildings, March 2022, MDPI AG

    Dr. Çağlar Yalçınkaya

  20. Sodium silicate/polyurethane microcapsules synthesized for enhancing self-healing ability of cementitious materials: Optimization of stirring speeds and evaluation of self-healing efficiency

    Article • Journal of Building Engineering, July 2021, Elsevier

    Dr. Çağlar Yalçınkaya

  21. Shear strengthening of RC beams with externally bonded UHPFRC laminates

    Article • Composite Structures, April 2021, Elsevier

    Dr. Çağlar Yalçınkaya

  22. A preliminary study on the development of the normal concrete-UHPC composite beam via wet casting

    Article • Journal of Structural Engineering & Applied Mechanics, March 2021, Golden Light Publishing

    Dr. Çağlar Yalçınkaya

  23. Hydration heat, strength and microstructure characteristics of UHPC containing blast furnace slag

    Article • Journal of Building Engineering, February 2021, Elsevier

    Dr. Çağlar Yalçınkaya

  24. Elephant skin formation on UHPC surface: Effects of climatic condition and blast furnace slag content

    Article • Construction and Building Materials, January 2021, Elsevier

    Dr. Çağlar Yalçınkaya

  25. Agrega hacminin ultra yüksek performanslı betonun büzülme, reolojik ve mekanik özelliklerine etkisi

    Article • Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, July 2020, Journal of the Faculty of Engineering and Architecture of Gazi University

    Dr. Çağlar Yalçınkaya

  26. Farklı Kalınlıkta UYPB Laminelerin Eğilme Kapasitesine Katkısının İncelenmesi

    Article • Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi, September 2019, Deu Muhendislik Fakultesi Fen ve Muhendislik

    Dr. Çağlar Yalçınkaya

  27. Early-age shrinkage properties of eco-friendly reactive powder concrete with reduced cement content

    Article • European Journal of Environmental and Civil engineering, September 2019, Taylor & Francis

    Dr. Çağlar Yalçınkaya

  28. The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing

    Article • Materials, April 2019, MDPI AG

    Dr. Çağlar Yalçınkaya

  29. Optimization of reactive powder concrete by means of barite aggregate for both neutrons and gamma rays

    Article • Construction and Building Materials, November 2018, Elsevier

    Dr. Çağlar Yalçınkaya

  30. Erken yaş büzülme çatlaklarının lif içeren/içermeyen ultra yüksek performanslı betona gömülü donatı korozyonuna etkisi

    Article • Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, December 2017, Journal of the Faculty of Engineering and Architecture of Gazi University

    Dr. Çağlar Yalçınkaya

  31. Flexural strengthening of RC beams using UHPFRC laminates

    Article • Construction and Building Materials, November 2017, Elsevier

    Dr. Çağlar Yalçınkaya

  32. Effects of ambient temperature and relative humidity on early-age shrinkage of UHPC with high-volume mineral admixtures

    Article • Construction and Building Materials, July 2017, Elsevier

    Dr. Çağlar Yalçınkaya

  33. Flexural performance of SIFCON composites subjected to high temperature

    Article • Construction and Building Materials, February 2016, Elsevier

    Dr. Çağlar Yalçınkaya

  34. Autoclaved reactive powder concrete: the effects of steel micro-fibers and silica fume dosage on the mechanical properties

    Article • Usak University Journal of Material Sciences, June 2014, Usak University Journal of Material Sciences

    Dr. Çağlar Yalçınkaya

  35. The effect of metakaolin and end type of steel fiber on fiber-SIFCON matrix bond characteristics

    Article • Usak University Journal of Material Sciences, June 2014, Usak University Journal of Material Sciences

    Dr. Çağlar Yalçınkaya

  36. Abrasion Resistance Of Reactive Powder Concrete: The Influence Of Water-to-cement Ratio And Steel Micro-fibers

    Article • Advanced Materials Letters, June 2014, VBRI Press

    Dr. Çağlar Yalçınkaya

  37. Freeze and Thaw Resistance of SCRM

    Article • Science and Engineering of Composite Materials, January 2014, De Gruyter

    Dr. Çağlar Yalçınkaya

  38. Effects Of Grp Wastes On The Properties Of Self-Compacting Repair Mortars

    Article • Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, January 2013, LookUs Bilisim, Ltd.

    Dr. Çağlar Yalçınkaya